Scribd
Upload
146 views

PRV Flex Connectors

Using bellows safety flex connectors on pressure relief valves provides three key benefits: 1) It seals the venting system, adding an additional level of protection for plant workers by preventing steam or hot water blowback. 2) A sealed vent system eliminates the draft and potential for steam blowback created by an open drip pan system. 3) Utilities prefer bellows connectors because they provide added security to personnel with a completely sealed vent line when pressure relief valves activate.

Uploaded by

Seungmin Paek
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
146 views

PRV Flex Connectors

Using bellows safety flex connectors on pressure relief valves provides three key benefits: 1) It seals the venting system, adding an additional level of protection for plant workers by preventing steam or hot water blowback. 2) A sealed vent system eliminates the draft and potential for steam blowback created by an open drip pan system. 3) Utilities prefer bellows connectors because they provide added security to personnel with a completely sealed vent line when pressure relief valves activate.

Uploaded by

Seungmin Paek
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

The Bellows Bottom Line

Practical advice on expansion joints


by Greg Perkins MARCH 2010

This month

Sealing the vent piping with a bellows safety valve connector


Healthy venting When pressure relief valves go off and you are standing next to it, you should have trust that the high pressure steam will blow through the vent piping as designed especially if the discharge elbow is an open system. An added level of safety, to help you stroll through the plant with confidence, is a bellows safety relief connector at the end of the discharge elbow. Open system relies on draft A common design for pressure relief valves is overlapped piping with a drip pan. The larger piping has enough clearance to accommodate the thermal growth differences between the vessel and vent piping. When the valve trips and releases high pressure steam, the high velocity will create a draft, or vacuum at the open drip pan. Hot condensate will then drip back down and collect in the drip pan. With a closed system at ground and walkway levels, there is no draft when a pressure relief valve trips; nor is there the potential of steam blow-back. The bottom Line Using bellows safety flex connectors on pressure relief valves seals the venting system and in return adds an additional level of protection in your plant - so you don't care where you are standing when the valve trips. Any obstructions in the vent piping can cause back pressure and potential blow-back of steam or hot water through the opening around the drip pan. To at least reduce the hot water exposure risk, all drain pans on open systems should be connected to a drain line. A sealed system is a safe system Bellows safety valve connectors have been used for many years on pressure relief valves by utilities; they like the added security to personnel of a sealed vent line.

Tricking Out Your Pressure Relief Valves

Next Issue Boiler penetration seal replacement options

The Bellows Bottom Line is a publication of Oakridge Bellows for a free subscription contact us at [email protected] For expansion joint information Greg Perkins can be contacted at [email protected] or (830) 626-7773 Oakridge Bellows 190 S. Seguin St. New Braunfels, TX 78130

You might also like