Scribd
Upload
216 views

Acl 01

The document describes an amplitude modulation transmitter kit that contains an audio oscillator, double sideband modulator, and single sideband modulator to generate AM signals up to 1.5MHz. The kit allows connection of external audio sources and includes test points, manuals, and the ability to transmit signals through a cable or antenna. It provides experiments on amplitude modulation, double and single sideband generation, and transmission of voice signals.

Uploaded by

Shannon Nunez
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
216 views

Acl 01

The document describes an amplitude modulation transmitter kit that contains an audio oscillator, double sideband modulator, and single sideband modulator to generate AM signals up to 1.5MHz. The kit allows connection of external audio sources and includes test points, manuals, and the ability to transmit signals through a cable or antenna. It provides experiments on amplitude modulation, double and single sideband generation, and transmission of voice signals.

Uploaded by

Shannon Nunez
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ACL - 01 AMPLITUDE MODULATION TRANSMITTER KIT

ACL-01 has an on-board audio oscillator as an analog signal source, which is used as a modulating signal. Alternatively facility is also provided for connecting an external audio-frequency signal as modulating input signal. On-board Double-Sideband Modulator is provided to generate a Double Side Band AM signal with a carrier frequency upto 1.5MHz. Also, on-board Single-Side Band Modulator is provided to generate a Single-Side Band AM signal with the help of Band Pass Filter. either by means of screened cable or the on-board antenna. Exhaustive manuals are provided along with the kit, which provides detailed experimental procedure and compThese modulated signals may be relayed to ACL-02lete circuit diagram explanation of the kit. FEATURES:

Carrier Input Modulating Input Carrier Null Output Amplitude CERAMIC FILTER: Central Frequency Bandwidth

: 1-1000 KHz. : 0.1-100 KHz. : Adjustable. : Adjustable.

: 455KHz. : 10 KHz +/- 3KHz.

OUTPUT AMPLIFIER: Gain adjustable. Connected to cable or antenna. ANTENNA: MW Coil. TEST POINTS: 29 Nos. Test points are provided on board to observe intermediate signals. INTERCONNECTION : 2 mm Bananna Socket. POWER SUPPLY: GND, +5V, +12V, -12V. (Dual output terminals) LIST OF EXPERIMENTS:

! On-Board Audio Oscillator 100Hz to 10KHz. ! Amplitude Modulation. ! Double Sideband AM Generation.Single ! ! ! !
Sideband AM Generation (USB/ LSB). Output Amplifier. Audio Pre-Amplifier. Ceramic Filter. On- Board Antenna.

TECHNICAL SPECIFICATIONS: AUDIO OSCILLATOR: (Sine wave Generator) Frequency : 100Hz to 10KHz. Amplitude : 0 to 2 Vp-p. Audio Input : Audio Pre-Amplifier with microphone input. VOLTAGE CONTROLLED OSCILLATOR : Output Signal : Sine Wave. Frequency Range : 1) 400KHz to 500KHz. 2) 400KHz to 1500KHz Amplitude : 0 to 2Vp-p. Output Impedance : 50 Ohm. AM/ DSB/ SSB MODULATOR: Modulation : Amplitude Modulation. : Double Side Band. : Single Side Band (USB, LSB)

! ! ! ! !

Study of Double Sideband AM Generation. Study of Single Sideband AM Generation. Study of adjustment of Transmitter tuned circuit. Voice transmission with DSB/SSB AM Transmission. Effect of Switch Faults.

ACCESSORIES: Red Short Links (10) Red Long Links (20) Crocodile Links (10) Extra Jumper Caps Microphone Speaker Experimental Manual Circuit Description Manual Power Supply Double Connector : 14 Nos. : 04 Nos. : 02 Nos. : 03 Nos. : 01 No : 01 No. : 01 No. : 01 No. : 01 No.

FE

FALCON

C Wing, New Satnam C.H.S., Parsiwada, Sahar Road, Andheri(East), Mumbai - 400 099. INDIA. Tel: 91-22-28348429 / 28370465 / 28367029 Fax: 91-22-28370165. Email: [email protected] Web: www.falconindia.biz

You might also like