Scribd
Upload
95 views

CNC Programming Basics - Test1

This document appears to be a quiz or test on machining and computer numerical control (CNC) programming concepts. It contains 20 multiple choice or fill-in-the-blank questions covering topics like the axes of lathes and milling machines, CNC positioning systems, common programming codes, tool functions, and programming modes. The questions assess understanding of fundamental CNC programming terminology and operations.

Uploaded by

Боривоје Спасојевић
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
95 views

CNC Programming Basics - Test1

This document appears to be a quiz or test on machining and computer numerical control (CNC) programming concepts. It contains 20 multiple choice or fill-in-the-blank questions covering topics like the axes of lathes and milling machines, CNC positioning systems, common programming codes, tool functions, and programming modes. The questions assess understanding of fundamental CNC programming terminology and operations.

Uploaded by

Боривоје Спасојевић
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

South Adams / Area 18 Machine Trades

NO NOTES ALLOWED!
Station 5
Name: ___________________________ Score: __________________
1. Most Lathes control 2 axes. The ______ axis controls cross motion of the cutting
tool.
2. On milling machines the _______ axis controls the vertical movement of the knee or
spindle.
3. Incremental program locations are always given as the distance and direction from
__________________________________.
4. The Y plus (Y+) command will cause the cutting tool to be located ___________
_________________________________ .
5. What are the 2 types of CNC Positioning Systems
A.___________________
B. ___________________
6. What are the 2 most common codes in CNC programming?
____________ and ____________
7. G02 will move the axes clockwise and is used for _______ and __________.
8. M04 does what to the spindle? ____________________________
9.

M30 does what?

10. 1 block of information consists of how many words?


11. The Machine Zero Point can be set by _______methods.
12. In absolute programming all dimensions must be taken from XY Zero at what corner of
the part?
13. The word-address letter R refers to what?
14. CDC allows for differences in ____________ diameter.

15. On Fanuc controls the G28 code is used to set the programmed offset of the
_________________________________.
16. What are 2 types of programming modes?
A. _______________________________
B. _______________________________
17. Absolute program locations are always given from
_____________________________________________________.
18. The G00 code does what?
_________________________________________________________________.
19. For turning the code M03 will do what? _______________________________
_____________________________________________________
20. When milling a Z.100 code does what?
____________________________________________________________________.

You might also like