Tank and Dike Work Book

Instructions and Notes 1 Purpose: This Excel Work Book was created to assist the Plant Layout Designer with a task that can be
complicated, filled with potential error and take a lot of time. The goal is to reduce costs by reducing time and improving quality.

2 Application: This Work Book can be used for single tank within a single containment area or can be used for
multiple tanks within a single containment area.

3 list of some of the most common API Storage Tank sizes. Space is included so the user can record other sizes
consistent with project specific requirements. Sheet #3 is the work sheet for the Single Tank application. Sheet #4 is the work Sheet for the multiple tank application. Sheet #5 is a two page work sheet: Page 1 is for the Dike Detail and page 2 is for the Tank Pad Detail.

Contents: There are five (5) sheets included. Sheet "1 (this sheet) is the instructions and Notes. Sheet #2 is a

4 and the Commodities. B) Determine if there is a Local or Client imposed Code that defines Grouping or

Tank Data: A) Collect a list of Tanks for the Project. This list must include the sizes (in Barrels), the Tank Types separation of Tank types or Commodities. If there are Tanks on the project list that are not included on Sheet #2 then add them in the "Yellow" spaces provided and in this case only hit "Save".

5 guidelines for A) the Angle of Repose of the material to be used for the Dikes (Berms, Bungs, etc.), the

Civil/Structural Data: Meet with the appropriate Civil/Structural Group and have them define preliminary recommended maximum height of the Dikes and for B) The proposed approach to Tank Pad profiles (Height and configuration).

6 The Task: Add the Dike Height and Angle of Repose data into Page 1 of Sheet #5. Add the Tank Pad height
Data to Page 2 of Sheet #5

7 For Single Tank Installation: Use Sheet #3. Enter all the data required (and Optional) Data in the "Yellow"
user entry boxes. The Form and the built-in formulas will do the work for you.

8 user entry boxes. The Form and the built-in formulas will do most of the work for you. With this grouping you

For Multiple Tank Installation: Use Sheet #4. Enter all the data required (and Optional) Data in the "Yellow" must select and enter a choice for the "Width" of the Containment Area. This is a "Trial and Error" method until you get the shape that fits the project needs.

9 Quitting and Closing: It is recommended that before closing the program that Copies of all Sheets be printed
out for all Tank configurations completed. When closing the program do not save the data. This will allow you to start with a clean Work Book for the next Tank configuration.

Note: Each Sheet of this Work Book is Password protected. In order to make a change to a "cell" that is not "Yellow" the Sheet must be "unprotected" using the password. This Password will be furnished on request.

User add data as required in yellow boxes (#1, #2 & #3) if provided data is not applicable User add tank capacity The information shown here is based on API Standard Storage Tanks commonly as required used in Tank Farm installations. Capacity Barrels Gallons (US) Gallons (UK) Cubic Feet Cubic Yards Cubic Meters Feet Diameter Meters Feet Height Meters

2,500 5,000 7,500 10,000 12,000 15,000 20,000 25,000 30,000 35,000 40,000 50,000 55,000 60,000 60,000 65,000 70,000 70,000 80,000 80,000 90,000 95,000

105,000 210,000 315,000 420,000 504,000 630,000 840,000 1,050,000 1,260,000 1,470,000 1,680,000 2,100,000 2,310,000 2,520,000 2,520,000 2,730,000 2,940,000 2,940,000 3,360,000 3,360,000 3,780,000 3,990,000 0 0 0 0 0 0 0

87,431 174,861 262,292 349,723 419,668 524,584 699,446 874,307 1,049,169 1,224,030 1,398,892 1,748,615 1,923,476 2,098,338 2,098,338 2,273,199 2,448,061 2,448,061 2,797,784 2,797,784 3,147,507 3,322,368 0 0 0 0 0 0 0

14,036 28,073 42,109 56,146 67,375 84,219 112,292 140,365 168,438 196,510 224,583 280,729 308,802 336,875 336,875 364,948 393,021 393,021 449,167 449,167 505,313 533,386 0 0 0 0 0 0 0

520 1,040 1,560 2,079 2,495 3,119 4,159 5,199 6,238 7,278 8,318 10,397 11,437 12,477 12,477 13,517 14,556 14,556 16,636 16,636 18,715 19,755 0 0 0 0 0 0 0

398 795 1,193 1,590 1,908 2,385 3,180 3,975 4,770 5,565 6,360 7,950 8,745 9,540 9,540 10,336 11,131 11,131 12,721 12,721 14,311 15,106 0 0 0 0 0 0 0

21.25 30.00 37.00 42.50 46.50 52.00 60.00 67.00 73.50 79.50 85.00 86.00 100.00 105.00 95.00 108.50 113.00 103.00 121.00 110.00 116.50 120.00

6.477 9.144 11.278 12.954 14.173 15.850 18.288 20.422 22.403 24.232 25.908 26.213 30.480 32.004 28.956 33.071 34.442 31.394 36.881 33.528 35.509 36.576 0.000 0.000 0.000 0.000 0.000 0.000 0.000

40 40 40 40 40 40 40 40 40 40 40 40 40 40 48 40 40 48 40 48 48 48

12.192 12.192 12.192 12.192 12.192 12.192 12.192 12.192 12.192 12.192 12.192 12.192 12.192 12.192 14.630 12.192 12.192 14.630 12.192 14.630 14.630 14.630 0.000 0.000 0.000 0.000 0.000 0.000 0.000

#1

#2

#3

Page 2

Tank & Dike Calculation Sheet #1

Single Tank in Single Dike Area #2 Tank Number A
Barrels The user only fills in data in the approprate "Yellow" boxes. No. 1, 2, 3, 4, 5 are optional, 6, 7, 8, 9 are required. The Answer is at #10

#3 By
#7 Diameter

#4 Date
#5 Height (Information only) Feet Meters

#1 Project Capacity Gallons (US) 0 Gallons (UK) 0 Volume (110%) Cubic Feet 0 0 #DIV/0! #DIV/0! Cubic Yards 0 Cubic Meters 0 0 Feet Meters See Note @ #10 Feet Meters

B #6
See Note @ #10

Minimum Toe of Dike to Crown of Dike if Dike area is square (North/South direction) (Same in East/West direction)

Tank Diameter -

Feet `

Tank Diameter -

0.0

Meters

Go to Sheet #5 for Dike Details 15 ft or 5m Min.

15 ft or 5m Min.

#8

Dike Height 0 0 Feet Meters

Effective Tank Pad Diameter 6 Feet 2.0 Meters

#9
Feet Meters

Pad Height

Go to Sheet #5 for Pad Details

Tank Pad
Pad Volume 0.00 0.00 Cubic Feet Cubic Meters

Dike Containment Area

Total Volume Required (*) 0 0 (*) Total Volume required includes Tank contents plus Pad displacement volume. Minimum Dike surface area #DIV/0! #DIV/0! Min. Req'd Length/Width #DIV/0!

#10
Feet

#DIV/0! Meters Note: For Total Outside Toe to Outside Toe Dimension add dim "Y" & "Z" from Sheet #5

Tank & Dike Calculation Sheet

The user only fills in data in the approprate "Yellow" boxes. No. 1, 2, 3, 4, 5 are optional, 6, 7, 8 are required. The Answer is at #9 & 10

Page 1

Multiple Tanks in Single Dike Area #2 Tank Numbers #3 By #7 Diameter

Cubic Yards 0 0 0 0 0 0 0 0 0 0 0 0 Cubic Meters 0 0 0 0 0 0 0 0 Feet Meters

#4 Date #5 Height(Optional)
Feet Meters

A
Largest Tk.

#1 Project Capacity

#6 Barrels B1

Gallons (US) 0

Gallons (UK) 0 Volume (110%)

Cubic Feet

C1 C2 C3 C4 C5

Smaller Tks.

0 0 0 0 0

0 0 0 0 0

Volume Largest Tank = Displacement Volume of Smaller Tanks = Displacement Volume of Pads = Total Volume of Containment area = Cu. Ft

0 0 0 0 #9
Selected Width Feet Meters Cu. Meters

0 0 0 0 #10
Minimum Length #DIV/0! #DIV/0! Feet Meters

Note: For Total Outside Toe to Outside Toe Dimension add dim "Y" & "Z" from Sheet #5

Minimum Width must include Largest Tank Pad Dia + Maintence between the Dike & Pad

Tank Diameter Tank Diameter Maint. Clearance

0 0.0

Feet Meters ` See Sht. #5 for Dike Height Dike Height

15 Feet 5 Meters

Largest Tank

Smaller Tank (s)

#8 Feet Meters

Pad Height Effective Tank Pad Diameter See Sheet #5 See Sheet #5

Page 1 Dike Width Calculation Detail

Crown Walkway decimal of feet The user must fill in appropriate data on both sheets in the "Yellow" boxes at No. 1, 2 and 3

#1
Actual = Recommended =

3 Feet Min. Recommended = 1 Meter Min. decimal of meter Actual =

"X"

This dimension "X" is determined by the "Angle of Repose" for the material used for the Dike. Concrete wall would be 1:0 ratio but desert sand might be 1:3 ratio. You must talk to Civil to get guidance.

#2
Required Angle Ratio

1 To

"Freeboard" This is the safety space for Rain or Fire Water volume

#3
Max. Recommended Dike Height Selected Feet Meters

6'-0" 2 Dike Profile

Feet Meters

This is the minimum height required for the spilled volume of the tank.

Angle of Repose Ratio Example- 1:1, 1:1.5, 1:2 Dim "Y"

Minimum Toe to Toe Dike width Item "X" #1 "X" #2 Walkway Imperial 0 0 0 Metric 0 0 0 0 0 0 0

Dim. "Z"

Total =

0 0 Dimension "X"

0 0 Dimension "Y"

Page 2
Tank Diameter

Pad Volume Calculation Detail

Tank Wall

Pad Slope

Pad Apron Tank Bottom Tank Pad

Effective Pad Volume equals the Tank Diameter + the Pad Apron for both sides & one Pad Slope

Tank Diameter If Single Tank Largest If Multiple Tank B (Ft) B (m) B1 (Ft) B1 (m) 0.0 0.0 0.0 0.0

Pad

#4 Apron

#5 Slope

Diameter 0.0 0.0 0.0 0.0

Radius 0.0 0.0 0.0 0.0

Radius Sq. 0.0 0.0 0.0 0.0

Area 0.0 0.0 0.0 0.0

#6 Height

Volume (Single Tank) 0.0 0.0 0.0 0.0 Cubic Feet Cu. Meters

C1 (Ft) C1 (m) C2 (Ft) C2 (m) Smaller multiple Tks. C3 (Ft) C3(m) C4 (ft) C4 (m) C5 (Ft) C5 (m)

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 Cubic Feet 0.0 Cu. Meters

Pad Volume for multiple Tanks