1MRS751393-MEN

Issue date: 31.01.2000

Program revision: 1.1.4
Documentation version: A
Copyright 2000 ABB Substation Automation Oy
All rights reserved.
SM/SPACOM
Configuration Manual
Notice 1
The information in this document is subject to change without notice and should not
be construed as a commitment by ABB. ABB assumes no responsibility for any error
that may occur in this document.
Notice 2
This module is included in CAP 501, CAP 505, LIB 510 in MicroSCADA and in
SMS 510.
Notice 3
Additional information such as Release Notes and Last Minute Remarks can be found
on the program distribution media.
Trademarks
Microsoft is a registered trademark of Microsoft Corporation.
Windows NT is a trademark of Microsoft Corporation.
LONWORKS is registered trademark of Echelon Corporation.
Other brand or product names are trademarks or registered trademarks of their respective holders.
All Microsoft products referenced in this document are either trademarks or registered trademarks of Microsoft
Corporation.
1MRS751393-MEN SM/SPACOM
Configuration Manual
ABB Automation 3
Contents
Page
1SM/SPACOM.......................................................................................7
1.1Overview ............................................................................................... 7
1.1.1Description ...................................................................................... 7
1.1.2Communication Support .................................................................. 7
1.1.2.1CAP 501/505 ............................................................................ 7
1.1.2.2SMS 510................................................................................... 7
1.1.2.3LIB 510 in MicroSCADA............................................................ 8
2Object Types General........................................................................9
2.1Projects ................................................................................................. 9
2.2Object Types ......................................................................................... 9
2.3Object Type Groups............................................................................... 9
2.4Objects .................................................................................................. 9
3Installation and Configuration........................................................11
3.1LIB 510/MicroSCADA: Installing and Configuring SPACOM Relays
Picture Functions ...................................................................................... 11
3.1.1Installing Relay Picture Functions.................................................. 11
3.1.2Relay Picture Function Configuration ............................................ 13
3.1.3Standard Configuration Tool Functions ......................................... 13
3.1.3.1Attributes Tab ......................................................................... 14
3.1.3.2Tools Tab................................................................................ 16
3.1.4Relay parametrisation ................................................................... 16
3.2CAP 501/505 ....................................................................................... 17
3.3Object Configuration Tool dialog box ................................................... 17
3.3.1Rack configuration tab................................................................... 17
3.3.1.1Add Relay/Module................................................................... 17
3.3.2Transducers tab ............................................................................ 19
3.4Communication Configuration.............................................................. 20
SM/SPACOM
Configuration Manual
1MRS751393-MEN
4 ABB Automation
3.4.1LIB 510 in MicroSCADA................................................................. 21
3.4.1.1Protocol tab ............................................................................. 22
3.4.1.2Address Settings tab ............................................................... 22
3.4.1.3Port Settings............................................................................ 23
3.4.2CAP 501/505 ................................................................................. 23
4Application Engineering Information in LIB 510/MicroSCADA...27
4.1Process Objects................................................................................... 27
4.2Files ..................................................................................................... 27
4.2.1Format Pictures ............................................................................. 27
4.2.2Texts.............................................................................................. 27
4.3Process Objects................................................................................... 27
4.3.1Used Abbreviations........................................................................ 28
4.3.2SPAM050C, SPAM051C and SPAM052C..................................... 29
4.3.3SPCD3C21 .................................................................................... 30
4.3.4SPCD3C22 .................................................................................... 30
4.3.5SPCD3C23 .................................................................................... 30
4.3.6SPCJ1C20..................................................................................... 31
4.3.7SPCJ1C7....................................................................................... 31
4.3.8SPCJ1C8....................................................................................... 31
4.3.9SPCJ2C30..................................................................................... 32
4.3.10 SPCJ3C3 .................................................................................... 32
4.3.11 SPCJ3C48 .................................................................................. 33
4.3.12 SPCJ3D35 .................................................................................. 33
4.3.13 SPCJ4D24 .................................................................................. 34
4.3.14 SPCJ4D29 .................................................................................. 35
4.3.15 SPCJ4D34 .................................................................................. 36
4.3.16 SPCJ4D36 .................................................................................. 37
4.3.17 SPCJ4D40 .................................................................................. 38
4.3.18 SPCJ4D44 .................................................................................. 39
4.3.19 SACO16A3 ................................................................................. 40
4.3.20 SACO16D2 ................................................................................. 47
4.3.21 SACO16D1B............................................................................... 49
4.3.22 SACO16D2B............................................................................... 51
4.3.23 SPCP3C2.................................................................................... 54
1MRS751393-MEN SM/SPACOM
Configuration Manual
ABB Automation 5
4.3.24 SPCS2D37................................................................................. 54
4.3.25 SPCS3C4................................................................................... 55
4.3.26 SPCS4D11................................................................................. 55
4.3.27 SPCS4D12................................................................................. 56
4.3.28 SPCS4D13................................................................................. 57
4.3.29 SPCT2C17 ................................................................................. 58
4.3.30 SPCT2C5 ................................................................................... 58
4.3.31 SPCT2D38 ................................................................................. 59
4.3.32 SPCT2D46 ................................................................................. 60
4.3.33 SPCU1C1................................................................................... 61
4.3.34 SPCU1C6................................................................................... 61
4.3.35 SPCU1D39................................................................................. 62
4.3.36 SPCU1D47................................................................................. 62
4.3.37 SPCU3C14................................................................................. 63
4.3.38 SPCU3C15................................................................................. 63
4.3.39 SPCU3D45................................................................................. 64
4.3.40 SPTO1C1................................................................................... 65
4.3.41 SPTO1C4................................................................................... 66
4.3.42 SPTO1D2................................................................................... 66
4.3.43 SPTO1D5................................................................................... 69
4.3.44 SPTO1D6................................................................................... 71
4.3.45 SPTO2C2................................................................................... 74
4.3.46 SPTO6D3................................................................................... 74
4.3.47 SPTO12D4................................................................................. 79
4.3.48 REC 501..................................................................................... 81
4.3.49 SPCF 1D15 ................................................................................ 82
4.4Format Pictures and Status Texts........................................................ 83
1MRS751393-MEN SM/SPACOM
Configuration Manual
1 SM/SPACOM
ABB Automation 7
1 SM/SPACOM
1.1 Overview
1.1.1 Description
SM/SPACOM includes SPACOM object types. An object type is a package that
contains relay configuration descriptions, profile files, standard function pictures and
data files, format pictures and texts.
SM/SPACOM package is used in the CAP 501 Setting Tool Box, CAP 505
Engineering Tool Box, SMS 510 Substation Monitoring System and MicroSCADA
application libraries LIB 500/510.
In LIB/MicroSCADA Environment, the standard function of SM/SPACOM is as
presented in the following figure.
Figure 1. Stanaara Function
File name: FRI_SPASM.DAT
File location in package: SM_SPACOM/SPACOM/INST
1.1.2 Communication Support
1.1.2.1 CAP 501/505
Communication options CAP 501/505
SPA via serial port x
1.1.2.2 SMS 510
Communication options SMS 510
SPA via SPANET or LON/SPA gateway x
SPA via serial port x
1 SM/SPACOM
SM/SPACOM
Configuration Manual
1MRS751393-MEN
8 ABB Automation
1.1.2.3 LIB 510 in MicroSCADA
Communication options SYS/LIB510
SPA via SPANET or LON/SPA gateway x
Transparent SPA via SRIO (ANSI) x
Transparent SPA via REC200 (RP570) x
Transparent SPA via RTU2x0 (RP571) x
SPA via serial port x
IEC 870-5-103 via IEC/SPA gateway x *)
*) No transparent SPA
1MRS751393-MEN SM/SPACOM
Configuration Manual
2 Object Types General
ABB Automation 9
2 Object Types General
2.1 Projects
A project is a collection of object instances arranged in a hierarchical order. Object
hierarchy is achieved by the use of nodes. Each node behaves like a directory in a file
system where each directory may contain files (in this case object instances). A
project always has a root node (resembling the root directory in a file system) and it is
also possible that this is the only node in the whole project.
In technical terms, a project is stored on disk in directories. Each project has its home
root directory. The next directory level has OBJ#### directories where #### stands
for a sequence number. Each object has a home directory of its own in the directory
structure.
2.2 Object Types
Object types determine the information structure and functionality of an object
instance. Object types can be of two main categories: device object types and context
object types. Objects that are members of a device object type (consequently such an
object is called a device object) stores information about a particular device, e.g. the
REF 54x is an example of this kind of object type.
All dialog boxes and program code that control the behaviour and structural design of
the object instance are stored in the object type resource files. This relationship
between object types and object instances resembles drivers in an operating system
where some drivers control physical devices and some control the behaviour of the
operating environment itself.
2.3 Object Type Groups
An object type group is a member class of object types that belong together in some
way. Object type groups can be considered as a collection of object types that serve
the same purpose. For example, the SPACOM object type belongs to the Protection &
Control object type group.
2.4 Objects
Each object in a project is a instance of an object type. The object stores settings, e.g.
parameter values that are later used by a tool that is adapted to use the information
contained in the object. Each object instance in a project has a private home directory
in the project file system.
The object type determines the file structure for the object instance. Some object
types prefer to save all object specific parameters in a single file in the object
directory while other object types use sub directories with various numbers of files.
Tools that have been adapted for use with the object type information structure then
2 Object Types General
SM/SPACOM
Configuration Manual
1MRS751393-MEN
10 ABB Automation
use object information stored in these parameter files when the object instance is
selected for a tool.
1MRS751393-MEN SM/SPACOM
Configuration Manual
3 Installation and Configuration
ABB Automation 11
3 Installation and Configuration
3.1 LIB 510/MicroSCADA: Installing and Configuring SPACOM Relays
Picture Functions
Following steps and tools are required for a SPACOM relay picture function in
MicroSCADA:
1. Installation of the relay picture function, (Installation Tool)
2. Configuration of the relay picture function (Standard Configuration Tool)
Attributes
Rack configuration (Object Configuration Tool)
Communication settings (Cconfig Tool)
Event handling (Event Editor)
Picture function object (Representation Tool)
3. Relay parametrisation (SPA Relay Tool)
Steps one and two are shortly described in the following sections, but relay
parametrisation is beyond the scope of this manual, please see LIB 510 4.0.3
Operators Manual (1MRS751281-MUM), SPA Relay Tool.
3.1.1 Installing Relay Picture Functions
The document LIB 500 Base 4.0.3 Configuration Manual (1MRS751277-MEN),
Introduction gives a general description of the principles for installing and
configuring picture functions in LIB. For every relay terminal a separate picture
function is added to the process picture. Please also see relevant relay manuals for
further information.
When installing a picture function, choose LIB4/LIB 510/PROTECTION/SPACOM
in the Standard Installation Tool. Select SPACOM and click with the mouse button.
After the standard function SPACOM has been highlighted, enter a Picture Function
Name for the function and click the Install button. Place the function anywhere in the
base picture.
3 Installation and Configuration
SM/SPACOM
Configuration Manual
1MRS751393-MEN
12 ABB Automation
Figure 2. The proceaure for installing a relay picture function, relay picture function SPA3 was successfully
installea, visible in the upper left corner
1MRS751393-MEN SM/SPACOM
Configuration Manual
3 Installation and Configuration
ABB Automation 13
3.1.2 Relay Picture Function Configuration
The following flowchart shows the procedure of the relay configuration:
Figure 3. The proceaure of the relay configuration
The Object Configuration tool is opened from the Tools menu of the Standard
Configuration Tool. The configuration of the relay can be divided into three phases.
1. Rack and module configuration
2. Storing relay specific data to the database
3. Storing picture function data
Phases 1 and 2 are done within the Object Configuration Tool.
Phase 3, storing picture function data, is done using the Standard Configuration Tool
by selecting Apply or Save.
NOTE! Before starting the configuration, please ensure that the base system objects
concerning the stations and nodes are configured correctly.
3.1.3 Standard Configuration Tool Functions
Select the relay picture function and start the Standard Configuration Tool to alter the
configurable attributes and to start the Object Configuration Tool.
3 Installation and Configuration
SM/SPACOM
Configuration Manual
1MRS751393-MEN
14 ABB Automation
The tabs Attributes and Tools are described in this section. The Representation Tool
in the Tools menu is not described.
3.1.3.1 Attributes Tab
Figure !. Stanaara Configuration Tool aialog with focus on Attributes tab
1MRS751393-MEN SM/SPACOM
Configuration Manual
3 Installation and Configuration
ABB Automation 15
The following attributes can be configured in the Standard Configuration Tool.
Configurable Choices
STATION_NAME The name of the substation. As a default the maximum length
of the text is 9 characters. This text will be used as a
substation identifier of the relay objects on event list, alarm list,
printout, database query, etc. It is very important that this text
is similar to all objects within the same substation.
BAY_NAME The name of the bay/feeder. As a default the maximum length
of the text is 14 characters. This text will be used as a
bay/feeder identifier of the relay objects on event list, alarm
list, printout, database query, etc. It is very important that this
text is similar to all objects within the same bay/feeder.
DEVICE_NAME The name (identifier) of the relay. As a default the maximum
length of the text is 5 characters. This text will be used as an
identifier of the relay on event list, alarm list, printout, database
query, etc.
AUTHORIZATION GROUP The authorization group used for the object.
VISIBLE Visibility of the object.
LIB_OBJECT_NAME Identifies the relay object. Name should be unique within the
application. The logical names of event process objects will be
created by using this name:LN = LIB_OBJECT_NAME + GT
specific character. (GT specific character is defined by LIB500
installation tools.) Max. length of attribute: 9 characters.
Saving Relay Data to the Picture Function
After the relay has been configured using the relay configuration tools, the data has to
be saved to the picture function, too. This is done by using the Standard Configuration
Tool commands Save attributes or Apply attributes.
Copying Picture Function Data
To copy picture function data and to paste it into another picture function, use the
commands Copy attributes and Paste attributes of the Standard Configuration Tool.
After you have copied the picture function data, open the Object Configuration Tool
and make the necessary definitions (addresses etc.).
Deleting Picture Function
To delete the picture function, select the option Delete in the Standard Configuration
Tool
NOTE! Remember to save the picture function data before you exit the Standard
Configuration Tool.
3 Installation and Configuration
SM/SPACOM
Configuration Manual
1MRS751393-MEN
16 ABB Automation
3.1.3.2 Tools Tab
The following tools can be started from the Tools tab in the Standard Configuration
Tool (Figure 5):
Object Configuration Tool for rack configuration (Function described in a later
section)
Cconfig Tool for communication settings (Function described in a later section)
Event Editor for event handling (Function described in LIB 510 4.0.3
Configuration Manual, 1MRS751280-MEN, Event Editor Configuration
Manual)
Representation Tool for picture function symbol used for the relay object, not
described
Figure 5. The Stanaara Configuration Tool aialog box - Tools tab
3.1.4 Relay parametrisation
After configuration of the Relay picture function, the relay module parameters are set
by means of the SPA Relay Tool. For more information, see LIB 510 4.0.3 Operators
Manual (1MRS751281-MUM), SPA Relay Tool.
1MRS751393-MEN SM/SPACOM
Configuration Manual
3 Installation and Configuration
ABB Automation 17
3.2 CAP 501/505
In CAP 501/505 environment, Object Configuration Tool is started by clicking first
the Object Properties shortcut button (the first button from the right in the tool bar),
and then clicking the Attributes button in the dialog box General Object Attributes.
3.3 Object Configuration Tool dialog box
Rack configuration and transducers are defined in the Object type configuration
dialog box as will be shown in the following.
3.3.1 Rack configuration tab
By clicking the Attributes button in the General Object Attributes dialog box, the
configuration dialog box containing three tabs appears (Figure 6).
Figure 6. Rack Configuration aialog box
3.3.1.1 Add Relay/Module
The type of module to be configured can be selected in the drop-down combo box in
the upper left-hand corner of the Rack Configuration tab (Figure 6, item 1). This drop-
down combo box contains a list of preconfigured relays or a list of different modules
depending on which type has been selected. Possible types are presented in Table 1.
3 Installation and Configuration
SM/SPACOM
Configuration Manual
1MRS751393-MEN
18 ABB Automation
Complete racks Predefined relay packages
Alarm Modules SACO
Auto Reclose Mod. SPCT
Control Modules SPTO
Current Modules SPCJ, SPCS, SPCP
Differential Mod. SPCD
Motor Prot. Mod. SPAM
Voltage Modules SPCU
Various Modules SPC 000, SPCF, SPEF
Disturbance recorder SPCR
Table 1. Different groups in the Types arop-aown menu
If e.g. the option Complete racks has been selected in the Type drop-down combo box
(Figure 6, item 1), preconfigured relays are listed in the combo box presented below
(Figure 6, item 2 and Figure 7). The relay/module can be selected in the combo box
named Modules (Figure 6, item 2). Click Add (Figure 6, item 3), and the relay
description can be seen in the field named Relay Description in the upper right-hand
corner (Figure 6, item 4). A list of corresponding modules is presented in the combo
box below the Relay Description field (Figure 6, item 5).
If the Rack (Figure 6, item 5) contains modules, the Relay Description field (item 4) is
empty. If, in turn, the option Complete Racks has been selected, the name of the relay
will automatically turn up into the Relay Description field. After the rack has been
configured, it is always possible to enter a description manually into the Relay
Description field.
In case modules need to be removed, click the Remove button. The operation may be
executed by clicking OK and cancelled by clicking Cancel.
Figure 7. Selection of the Complete racks. The rest of the moaules can be scrollea
1MRS751393-MEN SM/SPACOM
Configuration Manual
3 Installation and Configuration
ABB Automation 19
3.3.2 Transducers tab
Figure 8. Transaucers aialog box
Nominal Values can be entered (and altered) in the fields on the Transducers tab
(Figure 8). To exit the dialog box, click OK. The operation may be cancelled by
clicking Cancel.
Nominal values Iields:
The nominal values fields represent the nominal values of the transducers of the
module.
The nominal values are calculated according to the following rules:
Cuvvents (I, I0):
Ip = The nominal primary current for the transducer
Is = The nominal secondary current for the transducer
Ir = The nominal current for the input to the SPA relay
3 Installation and Configuration
SM/SPACOM
Configuration Manual
1MRS751393-MEN
20 ABB Automation
Residual voltage (U0):
or, if using the busbar voltage
Up = The nominal primary voltage for the transducer
U = The nominal busbar voltage
Us = The nominal secondary voltage for the transducer
Ur = The nominal voltage for the input to the SPA relay
Example:
The "nominal" value to be invoked is:
3.4 Communication Configuration
In order for the relay to communicate with the Relay Setting Tool, communication
between them has to be configured. This is performed in different ways in LIB and in
CAP environments (see in the following).
1MRS751393-MEN SM/SPACOM
Configuration Manual
3 Installation and Configuration
ABB Automation 21
3.4.1 LIB 510 in MicroSCADA
Figure 9. Stanaara Configuration Tool - Starting CConfig Tool
Start the Cconfig Tool in the Standard Configuration Tool/Tools tab by clicking the
name of the tool twice or by activating the name and by clicking Open.
3 Installation and Configuration
SM/SPACOM
Configuration Manual
1MRS751393-MEN
22 ABB Automation
3.4.1.1 Protocol tab
Figure 10. The Protocol tab
The possible protocols are shown on the first tab named Protocol. In the Relay Setting
Tool the Serial SPA is the only possible protocol to be used as it can be seen in the
figure above.
3.4.1.2 Address Settings tab
Figure 11. Aaaress Settings tab
1MRS751393-MEN SM/SPACOM
Configuration Manual
3 Installation and Configuration
ABB Automation 23
On the second tab (Figure 11) it is possible to select the installed modules in the
combo box. The Unit number of the Module addresses can be entered in the field on
the lower part of the tab.
3.4.1.3 Port Settings
Figure 12. Port Settings tab
On the Port Settings tab in the Communication Configuration dialog box (Figure 12),
there are drop-down combo boxes containing values and alternatives the user is able
to choose.
To confirm the made selections and the given values and to exit the dialog box, click
OK. To exit the dialog box without confirming the made selections and the given
values, click Cancel.
3.4.2 CAP 501/505
In CAP 501/505 environment, communication between the relay and the Relay
Setting Tool is configured in the General Object Attributes dialog/Communication
tab. To open the General Object Attributes dialog, first select a relay in the navigation
tree and then click the Object Properties shortcut button (the last shortcut button) in
the toolbar. Select the Communication tab in the General Object Attributes dialog
(see Figure 13).
3 Installation and Configuration
SM/SPACOM
Configuration Manual
1MRS751393-MEN
24 ABB Automation
Figure 13. Communication tab in the General Obfect Attributes aialog box
Insert the Station number in the Module addresses field.
Serial port is defined in the System Configuration dialog (Figure 14), which is opened
by clicking the System Configuration button in the Communication tab (Figure 13).
Figure 1!. System Configuration aialog box
Click Add, after which the Add serial port dialog box appears.
1MRS751393-MEN SM/SPACOM
Configuration Manual
3 Installation and Configuration
ABB Automation 25
Figure 15. Aaa serial port aialog box
Insert the port number and click OK. The program returns to the System
Configuration dialog box (Figure 16), where the relevant information can be seen.
Click OK to confirm the made changes and to close the dialog box.
Figure 16. System Configuration aialog box with relevant information
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 27
4 Application Engineering Information in
LIB 510/MicroSCADA
The contents of this chapter only concern LIB510/MicroSCADA environment.
4.1 Process Objects
The process objects related to this function are described in chapter Process Objects
later in this document.
4.2 Files
The files that are used for LIB 510 SM/SPACOM are described below:
4.2.1 Format Pictures
Format pictures used during runtime for event and alarm presentation.
Filename Name Location *)
FORM4FRALI.PIC Event texts USE
1)
FORM4UMEV.PIC Unmapped events USE
1)
*) SC/LIB4/FMOD/SM_SPACOM/SPACOM/
1)
4.2.2 Texts
Language dependent text files are used during installation/configuration and runtime.
Filename Name Location *)
*.TXT Event texts LANGL
1)
*.SPT Group texts LANGL
1)
*.CFG Relay unit texts LANGL
1)
*) SC/LIB4/FMOD/SM_SPACOM/ SPACOM/
1)
(L = IS A VALUE >=0)
4.3 Process Objects
Process Objects are created in the Event Editor. Event codes, Object texts and
indexies are shown in tables 4.3.2-4.3.49.
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
28 ABB Automation
4.3.1 Used Abbreviations
ACT. ACTIVATION
AR AUTORECLOSE
BLK. BLOCK
BS BLOCKING SIGNAL
C CLOSE
CB CIRCUIT BREAKER
CH CHANNEL
COM. COMMAND
CS COMMAND SIGNAL
DEF. DEFINITE
DEL. DELAYED
DEVI. DEVIATION
DISC. DISCONNECTOR
DISCON. DISCONNECTOR
DWNW DOWNWARD
E/F EARTH FAULT
EXT. EXTERNAL
H-SET HI-SET
HSAR HI-SPEED AUTORECLOSE
IND. INDICATION
INHIB. INHIBIT
INIT. INITIALIZATION
INT. INTERNAL
INTER. INTERRUPTED
L-SET LO-SET
L/R LOCAL/REMOTE
MEAS. MEASUREMENT
MEM. MEMORY
O OPEN
OSC. OSCILLATION
OVERL. OVERLOAD
O/C OVERCURRENT
PARAM. PARAMETER
PROTEC. PROTECTION
RECONN. RECONNECTION
REG. REGISTER
REV. REVERSE
SC SYNCROCHECK
SEL. SELECTION
SET-P. SET-POINT
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 29
SG SWITCH GROUP
SIGN. SIGNAL
SSAR SLOW-SPEED
ST. STATE
TD RECLAIM TIME
TN DISCRIMINATING TIME
U.W UPWARD
UNDEF. UNDEFINED
UPW UPWARD
V. VALUE
VAL VALUE
VC VOLTAGE CHECK
W.OUT WITHOUT
4.3.2 SPAM050C, SPAM051C and SPAM052C
E-code Index Object Text (OX+status)
E1 120 STARTUP BEGIN
E2 120 STARTUP OVER
E3 121 ALARM SIGNAL ON
E4 121 ALARM SIGNAL RESET
E5 122 TRIP SIGNAL ON
E6 122 TRIP SIGNAL RESET
E7 123 RESTART INHIBIT ON
E8 123 RESTART INHIBIT OFF
E9 124 ALARM SIGNAL ON
E10 124 ALARM SIGNAL RESET
E11 125 TRIP SIGNAL ON
E12 125 TRIP SIGNAL RESET
E13 126 TRIP SIGNAL ON
E14 126 TRIP SIGNAL RESET
E15 127 ALARM SIGNAL ON
E16 127 ALARM SIGNAL RESET
E17 128 TRIP SIGNAL ON
E18 128 TRIP SIGNAL RESET
E19 129 TRIP SIGNAL ON
E20 129 TRIP SIGNAL RESET
E21 130 INT. RELAY FAULT ON
E22 130 INT. RELAY FAULT OFF
E50 202 RESTARTING
E51 203 REG. OVERFLOW
E52 204 COMMUNICATION
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
30 ABB Automation
E53 205 RESPONDS FAILED
E54 205 RESPONDS AGAIN
4.3.3 SPCD3C21
E-code Index Object Text
E1 31 HARMONICS BLOCKING ON
E2 31 HARMONICS BLOCKING OFF
E3 32 L1 TRIP ON
E4 32 L1 TRIP OFF
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
4.3.4 SPCD3C22
E-code Index Object Text
E1 33 HARMONICS BLOCKING ON
E2 33 HARMONICS BLOCKING OFF
E3 34 L2 TRIP ON
E4 34 L2 TRIP OFF
E50 184 RESTARTING
E51 185 REG. OVERFLOW
E52 186 COMMUNICATION
E53 187 RESPONDS FAILED
E54 187 RESPONDS AGAIN
4.3.5 SPCD3C23
E-code Index Object Text
E1 35 HARMONICS BLOCKING ON
E2 35 HARMONICS BLOCKING OFF
E3 36 L3 TRIP ON
E4 36 L3 TRIP OFF
E50 188 RESTARTING
E51 189 REG. OVERFLOW
E52 190 COMMUNICATION
E53 191 RESPONDS FAILED
E54 191 RESPONDS AGAIN
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 31
4.3.6 SPCJ1C20
E-code Index Object Text
E1 26 I1F> START ON
E2 26 I1F> START OFF
E3 27 BLOCKING ON
E4 27 BLOCKING OFF
E50 196 RESTARTING
E51 197 REG. OVERFLOW
E52 198 COMMUNICATION
E53 199 RESPONDS FAILED
E54 199 RESPONDS AGAIN
4.3.7 SPCJ1C7
E-code Index Object Text
E1 11 I0> START ON
E2 11 I0> START OFF
E3 12 I0> TRIP ON
E4 12 I0> TRIP OFF
E5 13 I0>> START ON
E6 13 I0>> START OFF
E7 14 I0>> TRIP ON
E8 14 I0>> TRIP OFF
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
4.3.8 SPCJ1C8
E-code Index Object Text
E1 15 I0> START ON
E2 15 I0> START OFF
E3 16 I0> TRIP ON
E4 16 I0> TRIP OFF
E5 17 I0>> START ON
E6 17 I0>> START OFF
E7 18 I0>> TRIP ON
E8 18 I0>> TRIP OFF
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
32 ABB Automation
E50 184 RESTARTING
E51 185 REG. OVERFLOW
E52 186 COMMUNICATION
E53 187 RESPONDS FAILED
E54 187 RESPONDS AGAIN
4.3.9 SPCJ2C30
E-code Index Object Text
E1 23 D I0> TRIP ON
E2 23 D I0> TRIP OFF
E3 24 I0> START ON
E4 24 I0> START OFF
E5 25 I0> TRIP ON
E6 25 I0> TRIP OFF
E50 192 RESTARTING
E51 193 REG. OVERFLOW
E52 194 COMMUNICATION
E53 195 RESPONDS FAILED
E54 195 RESPONDS AGAIN
4.3.10 SPCJ3C3
E-code Index Object Text
E1 19 I> START ON
E2 19 I> START OFF
E3 20 I> TRIP ON
E4 20 I> TRIP OFF
E5 21 I>> START ON
E6 21 I>> START OFF
E7 22 I>> TRIP ON
E8 22 I>> TRIP OFF
E50 188 RESTARTING
E51 189 REG. OVERFLOW
E52 190 COMMUNICATION
E53 191 RESPONDS FAILED
E54 191 RESPONDS AGAIN
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 33
4.3.11 SPCJ3C48
E-code Index Object Text
E1 56 I> START ON
E2 56 I> START OFF
E3 57 I> TRIP ON
E4 57 I> TRIP OFF
E5 58 I>> START ON
E6 58 I>> START OFF
E7 59 I>> TRIP ON
E8 59 I>> TRIP OFF
E9 60 I0> START ON
E10 60 I0> START OFF
E11 61 I0> TRIP ON
E12 61 I0> TRIP OFF
E50 192 RESTARTING
E51 193 REG. OVERFLOW
E52 194 COMMUNICATION
E53 195 RESPONDS FAILED
E54 195 RESPONDS AGAIN
4.3.12 SPCJ3D35
E-code Index Object Text
E1 40 I1> START ON
E2 40 I1> START OFF
E3 41 I1> TRIP ON
E4 41 I1> TRIP OFF
E5 42 I2> START ON
E6 42 I2> START OFF
E7 43 I2> TRIP ON
E8 43 I2> TRIP OFF
E9 44 I3> START ON
E10 44 I3> START OFF
E11 45 I3> TRIP ON
E12 45 I3> TRIP OFF
E13 46 I4> START ON
E14 46 I4> START OFF
E15 47 I4> TRIP ON
E16 47 I4> TRIP OFF
E17 48 OUTPUT SS1 ON
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
34 ABB Automation
E18 48 OUTPUT SS1 OFF
E19 49 OUTPUT TS1 ON
E20 49 OUTPUT TS1 OFF
E21 50 OUTPUT SS2 ON
E22 50 OUTPUT SS2 OFF
E23 51 OUTPUT TS2 ON
E24 51 OUTPUT TS2 OFF
E25 52 OUTPUT SS3 ON
E26 52 OUTPUT SS3 OFF
E27 53 OUTPUT TS3 ON
E28 53 OUTPUT TS3 OFF
E29 54 OUTPUT SS4 ON
E30 54 OUTPUT SS4 OFF
E31 55 OUTPUT TS4 ON
E32 55 OUTPUT TS4 OFF
E50 188 RESTARTING
E51 189 REG. OVERFLOW
E52 190 COMMUNICATION
E53 191 RESPONDS FAILED
E54 191 RESPONDS AGAIN
4.3.13 SPCJ4D24
E-code Index Object Text
E1 32 I> START ON
E2 32 I> START OFF
E3 33 I> TRIP ON
E4 33 I> TRIP OFF
E5 34 I>> START ON
E6 34 I>> START OFF
E7 35 I>> TRIP ON
E8 35 I>> TRIP OFF
E9 36 I0> START ON
E10 36 I0> START OFF
E11 37 I0> TRIP ON
E12 37 I0> TRIP OFF
E13 38 I0>> START ON
E14 38 I0>> START OFF
E15 39 I0>> TRIP ON
E16 39 I0>> TRIP OFF
E17 40 OUTPUT TS1 ON
E18 40 OUTPUT TS1 OFF
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 35
E19 41 OUTPUT SS1 ON
E20 41 OUTPUT SS1 OFF
E21 42 OUTPUT SS2 ON
E22 42 OUTPUT SS2 OFF
E23 43 OUTPUT SS3 ON
E24 43 OUTPUT SS3 OFF
E25 44 OUTPUT TS2 ON
E26 44 OUTPUT TS2 OFF
E50 204 RESTARTING
E51 205 REG. OVERFLOW
E52 206 COMMUNICATION
E53 207 RESPONDS FAILED
E54 207 RESPONDS AGAIN
4.3.14 SPCJ4D29
E-code Index Object Text
E1 45 I> START ON
E2 45 I> START OFF
E3 46 I> TRIP ON
E4 46 I> TRIP OFF
E5 47 I>> START ON
E6 47 I>> START OFF
E7 48 I>> TRIP ON
E8 48 I>> TRIP OFF
E9 49 I0> START ON
E10 49 I0> START OFF
E11 50 I0> TRIP ON
E12 50 I0> TRIP OFF
E13 51 I0>> START ON
E14 51 I0>> START OFF
E15 52 I0>> TRIP ON
E16 52 I0>> TRIP OFF
E17 53 OUTPUT TS1 ON
E18 53 OUTPUT TS1 OFF
E19 54 OUTPUT SS1 ON
E20 54 OUTPUT SS1 OFF
E21 55 OUTPUT SS2 ON
E22 55 OUTPUT SS2 OFF
E23 56 OUTPUT SS3 ON
E24 56 OUTPUT SS3 OFF
E25 57 OUTPUT TS2 ON
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
36 ABB Automation
E26 57 OUTPUT TS2 OFF
E50 208 RESTARTING
E51 209 REG. OVERFLOW
E52 210 COMMUNICATION
E53 211 RESPONDS FAILED
E54 211 RESPONDS AGAIN
4.3.15 SPCJ4D34
E-code Index Object Text
E1 58 ENGINE START ON
E2 58 ENGINE START OFF
E3 59 ST. THERMAL OVERL.
E4 59 ST. THERMAL OVERL. RESET
E5 60 TR. THERMAL ALARM
E6 60 TR. THERMAL ALARM RESET
E7 61 TR. THERMAL OVERL.
E8 61 TR. THERMAL OVERL. RESET
E9 62 IS START ON
E10 62 IS START OFF
E11 63 IS TRIP ON
E12 63 IS TRIP OFF
E13 64 I>> START ON
E14 64 I>> START OFF
E15 65 I>> TRIP ON
E16 65 I>> TRIP OFF
E17 66 I0 START ON
E18 66 I0 START OFF
E19 67 I0 TRIP ON
E20 67 I0 TRIP OFF
E21 68 ID START ON
E22 68 ID START OFF
E23 69 ID TRIP ON
E24 69 ID TRIP OFF
E25 70 I< START ON
E26 70 I< START OFF
E27 71 I< TRIP ON
E28 71 I< TRIP OFF
E29 72 EXT. TRIP SIGNAL ON
E30 72 EXT. TRIP SIGNAL OFF
E31 73 RESTARTING INHIBIT
E32 73 RESTARTING INHIBIT RESET
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 37
E33 74 OUTPUT TS1 ON
E34 74 OUTPUT TS1 OFF
E35 75 OUTPUT SS1 ON
E36 75 OUTPUT SS1 OFF
E37 76 OUTPUT SS2 ON
E38 76 OUTPUT SS2 OFF
E39 77 OUTPUT SS3 ON
E40 77 OUTPUT SS3 OFF
E41 78 OUTPUT TS2 ON
E42 78 OUTPUT TS2 OFF
E50 212 RESTARTING
E51 213 REG. OVERFLOW
E52 214 COMMUNICATION
E53 215 RESPONDS FAILED
E54 215 RESPONDS AGAIN
4.3.16 SPCJ4D36
E-code Index Object Text
E1 27 I> START ON
E2 27 I> START OFF
E3 28 I> TRIP ON
E4 28 I> TRIP OFF
E5 29 I>> START ON
E6 29 I>> START OFF
E7 30 I>> TRIP ON
E8 30 I>> TRIP OFF
E9 31 I0> START ON
E10 31 I0> START OFF
E11 32 I0> TRIP ON
E12 32 I0> TRIP OFF
E13 33 I0>> START ON
E14 33 I0>> START OFF
E15 34 I0>> TRIP ON
E16 34 I0>> TRIP OFF
E17 35 OUTPUT TS1 ON
E18 35 OUTPUT TS1 OFF
E19 36 OUTPUT SS1 ON
E20 36 OUTPUT SS1 OFF
E21 37 OUTPUT SS2 ON
E22 37 OUTPUT SS2 OFF
E23 38 OUTPUT SS3 ON
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
38 ABB Automation
E24 38 OUTPUT SS3 OFF
E25 39 OUTPUT TS2 ON
E26 39 OUTPUT TS2 OFF
E50 184 RESTARTING
E51 185 REG. OVERFLOW
E52 186 COMMUNICATION
E53 187 RESPONDS FAILED
E54 187 RESPONDS AGAIN
4.3.17 SPCJ4D40
E-code Index Object Text
E1 79 IB> START ON
E2 79 IB> START OFF
E3 80 IB> TRIP ON
E4 80 IB> TRIP OFF
E5 81 IA> START ON
E6 81 IA> START OFF
E7 82 IA> TRIP ON
E8 82 IA> TRIP OFF
E9 83 I< START ON
E10 83 I< START OFF
E11 84 I< TRIP ON
E12 84 I< TRIP OFF
E13 85 ID1> START ON
E14 85 ID1> START OFF
E15 86 ID1> TRIP ON
E16 86 ID1> TRIP OFF
E17 87 ID2> START ON
E18 87 ID2> START OFF
E19 88 ID2> TRIP ON
E20 88 ID2> TRIP OFF
E21 89 EXT. TRIP SIGNAL ON
E22 89 EXT. TRIP SIGNAL OFF
E23 90 RECONN. INHIBIT ON
E24 90 RECONN. INHIBIT OFF
E25 91 OUTPUT TS1 ON
E26 91 OUTPUT TS1 OFF
E27 92 OUTPUT SS1 ON
E28 92 OUTPUT SS1 OFF
E29 93 OUTPUT SS2 ON
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 39
E30 93 OUTPUT SS2 OFF
E31 94 OUTPUT SS3 ON
E32 94 OUTPUT SS3 OFF
E33 95 OUTPUT TS2 ON
E34 95 OUTPUT TS2 OFF
E50 216 RESTARTING
E51 217 REG. OVERFLOW
E52 218 COMMUNICATION
E53 219 RESPONDS FAILED
E54 219 RESPONDS AGAIN
4.3.18 SPCJ4D44
E-code Index Object Text
E1 96 I> START ON
E2 96 I> START OFF
E3 97 I> TRIP ON
E4 97 I> TRIP OFF
E5 98 I>> START ON
E6 98 I>> START OFF
E7 99 I>> TRIP ON
E8 99 I>> TRIP OFF
E9 100 I01> START ON
E10 100 I01> START OFF
E11 101 I01> TRIP ON
E12 101 I01> TRIP OFF
E13 102 U0> START ON
E14 102 U0> START OFF
E15 103 I02>> TRIP ON
E16 103 I02>> TRIP OFF
E17 104 OUTPUT TS1 ON
E18 104 OUTPUT TS1 OFF
E19 105 OUTPUT SS1 ON
E20 105 OUTPUT SS1 OFF
E21 106 OUTPUT SS2 ON
E22 106 OUTPUT SS2 OFF
E23 107 OUTPUT SS3 ON
E24 107 OUTPUT SS3 OFF
E25 108 OUTPUT TS2 ON
E26 108 OUTPUT TS2 OFF
E50 220 RESTARTING
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
40 ABB Automation
E51 221 REG. OVERFLOW
E52 222 COMMUNICATION
E53 223 RESPONDS FAILED
E54 223 RESPONDS AGAIN
4.3.19 SACO16A3
E-code Index Object Text
E1 150 HI SET-POINT VAL. ACTIVE
E2 150 HI SET-POINT VAL. RESET
E3 151 BLK. SET-POINT VAL. ACTIVE
E4 151 BLK. SET-POINT VAL. RESET
E7 153 PARAM. MEM. INIT. START
E8 153 PARAM. MEM. INIT. EXEC
E10 154 INT. UNIT FAULT
E13 156 EVENT REG. OVERFLOW
E22 157 EARTH-FAULT ACTIVE
E23 157 EARTH-FAULT RESET
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
Channel 1
E1 11 CH1 HI SET-P. VAL. START
E2 11 CH1 HI SET-P. VAL. RESET
E3 12 CH1 HI TRIP SET-P V START
E4 12 CH1 HI TRIP SET-P V RESET
E5 13 CH1 LO SET-P. VAL. START
E6 13 CH1 LO SET-P. VAL. RESET
E7 14 CH1 LO TRIP SET-P V START
E8 14 CH1 LO TRIP SET-P V RESET
E15 15 CH1 MEAS. DEVI. REG UPWARDS
E16 15 CH1 MEAS. DEVI. REG DOWNWARDS
E20 16 CH1 MEAS. RANGE UPW ACTIVE
E21 17 CH1 MEAS. RANGE DWNW ACTIVE
E23 18 CH1 TRIP. IND. OSC. ALARM
E24 16 CH1 MEAS. RANGE UPW RESET
E25 17 CH1 MEAS. RANGE DWNW RESET
Channel 2
E1 19 CH2 HI SET-P. VAL. START
E2 19 CH2 HI SET-P. VAL. RESET
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 41
E3 20 CH2 HI TRIP SET-P V START
E4 20 CH2 HI TRIP SET-P V RESET
E5 21 CH2 LO SET-P. VAL. START
E6 21 CH2 LO SET-P. VAL. RESET
E7 22 CH2 LO TRIP SET-P V START
E8 22 CH2 LO TRIP SET-P V RESET
E15 23 CH2 MEAS. DEVI. REG UPWARDS
E16 23 CH2 MEAS. DEVI. REG DOWNWARDS
E20 24 CH2 MEAS. RANGE UPW ACTIVE
E21 25 CH2 MEAS. RANGE DWNW ACTIVE
E23 26 CH2 TRIP. IND. OSC. ALARM
E24 24 CH2 MEAS. RANGE UPW RESET
E25 25 CH2 MEAS. RANGE DWNW RESET
Channel 3
E1 27 CH3 HI SET-P. VAL. START
E2 27 CH3 HI SET-P. VAL. RESET
E3 28 CH3 HI TRIP SET-P V START
E4 28 CH3 HI TRIP SET-P V RESET
E5 29 CH3 LO SET-P. VAL. START
E6 29 CH3 LO SET-P. VAL. RESET
E7 30 CH3 LO TRIP SET-P V START
E8 30 CH3 LO TRIP SET-P V RESET
E15 31 CH3 MEAS. DEVI. REG UPWARDS
E16 31 CH3 MEAS. DEVI. REG DOWNWARDS
E20 32 CH3 MEAS. RANGE UPW ACTIVE
E21 33 CH3 MEAS. RANGE DWNW ACTIVE
E23 34 CH3 TRIP. IND. OSC. ALARM
E24 32 CH3 MEAS. RANGE UPW RESET
E25 33 CH3 MEAS. RANGE DWNW RESET
Channel 4
E1 35 CH4 HI SET-P. VAL. START
E2 35 CH4 HI SET-P. VAL. RESET
E3 36 CH4 HI TRIP SET-P V START
E4 36 CH4 HI TRIP SET-P V RESET
E5 37 CH4 LO SET-P. VAL. START
E6 37 CH4 LO SET-P. VAL. RESET
E7 38 CH4 LO TRIP SET-P V START
E8 38 CH4 LO TRIP SET-P V RESET
E15 39 CH4 MEAS. DEVI. REG UPWARDS
E16 39 CH4 MEAS. DEVI. REG DOWNWARDS
E20 40 CH4 MEAS. RANGE UPW ACTIVE
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
42 ABB Automation
E21 41 CH4 MEAS. RANGE DWNW ACTIVE
E23 42 CH4 TRIP. IND. OSC. ALARM
E24 40 CH4 MEAS. RANGE UPW RESET
E25 41 CH4 MEAS. RANGE DWNW RESET
Channel 5
E1 43 CH5 HI SET-P. VAL. START
E2 43 CH5 HI SET-P. VAL. RESET
E3 44 CH5 HI TRIP SET-P V START
E4 44 CH5 HI TRIP SET-P V RESET
E5 45 CH5 LO SET-P. VAL. START
E6 45 CH5 LO SET-P. VAL. RESET
E7 46 CH5 LO TRIP SET-P V START
E8 46 CH5 LO TRIP SET-P V RESET
E15 47 CH5 MEAS. DEVI. REG UPWARDS
E16 47 CH5 MEAS. DEVI. REG DOWNWARDS
E20 48 CH5 MEAS. RANGE UPW ACTIVE
E21 49 CH5 MEAS. RANGE DWNW ACTIVE
E23 50 CH5 TRIP. IND. OSC. ALARM
E24 48 CH5 MEAS. RANGE U.W RESET
E25 49 CH5 MEAS. RANGE DWNW RESET
Channel 6
E1 51 CH6 HI SET-P. VAL. START
E2 51 CH6 HI SET-P. VAL. RESET
E3 52 CH6 HI TRIP SET-P V START
E4 52 CH6 HI TRIP SET-P V RESET
E5 53 CH6 LO SET-P. VAL. START
E6 53 CH6 LO SET-P. VAL. RESET
E7 54 CH6 LO TRIP SET-P V START
E8 54 CH6 LO TRIP SET-P V RESET
E15 55 CH6 MEAS. DEVI. REG UPWARDS
E16 55 CH6 MEAS. DEVI. REG DOWNWARDS
E20 56 CH6 MEAS. RANGE UPW ACTIVE
E21 57 CH6 MEAS. RANGE DWNW ACTIVE
E23 58 CH6 TRIP. IND. OSC. ALARM
E24 56 CH6 MEAS. RANGE UPW RESET
E25 57 CH6 MEAS. RANGE DWNW RESET
Channel 7
E1 59 CH7 HI SET-P. VAL. START
E2 59 CH7 HI SET-P. VAL. RESET
E3 60 CH7 HI TRIP SET-P V START
E4 60 CH7 HI TRIP SET-P V RESET
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 43
E5 61 CH7 LO SET-P. VAL. START
E6 61 CH7 LO SET-P. VAL. RESET
E7 62 CH7 LO TRIP SET-P V START
E8 62 CH7 LO TRIP SET-P V RESET
E15 63 CH7 MEAS. DEVI. REG UPWARDS
E16 63 CH7 MEAS. DEVI. REG DOWNWARDS
E20 64 CH7 MEAS. RANGE UPW ACTIVE
E21 65 CH7 MEAS. RANGE DWNW ACTIVE
E23 66 CH7 TRIP. IND. OSC. ALARM
E24 64 CH7 MEAS. RANGE UPW RESET
E25 65 CH7 MEAS. RANGE DWNW RESET
Channel 8
E1 67 CH8 HI SET-P. VAL. START
E2 67 CH8 HI SET-P. VAL. RESET
E3 68 CH8 HI TRIP SET-P V START
E4 68 CH8 HI TRIP SET-P V RESET
E5 69 CH8 LO SET-P. VAL. START
E6 69 CH8 LO SET-P. VAL. RESET
E7 70 CH8 LO TRIP SET-P V START
E8 70 CH8 LO TRIP SET-P V RESET
E15 71 CH8 MEAS. DEVI. REG UPWARDS
E16 71 CH8 MEAS. DEVI. REG DOWNWARDS
E20 72 CH8 MEAS. RANGE UPW ACTIVE
E21 73 CH8 MEAS. RANGE DWNW ACTIVE
E23 74 CH8 TRIP. IND. OSC. ALARM
E24 72 CH8 MEAS. RANGE UPW RESET
E25 73 CH8 MEAS. RANGE DWNW RESET
Channel 9
E1 75 CH9 HI SET-P. VAL. START
E2 75 CH9 HI SET-P. VAL. RESET
E3 76 CH9 HI TRIP SET-P V START
E4 76 CH9 HI TRIP SET-P V RESET
E5 77 CH9 LO SET-P. VAL. START
E6 77 CH9 LO SET-P. VAL. RESET
E7 78 CH9 LO TRIP SET-P V START
E8 78 CH9 LO TRIP SET-P V RESET
E15 79 CH9 MEAS. DEVI. REG UPWARDS
E16 79 CH9 MEAS. DEVI. REG DOWNWARDS
E20 80 CH9 MEAS. RANGE UPW ACTIVE
E21 81 CH9 MEAS. RANGE DWNW ACTIVE
E23 82 CH9 TRIP. IND. OSC. ALARM
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
44 ABB Automation
E24 80 CH9 MEAS. RANGE UPW RESET
E25 81 CH9 MEAS. RANGE DWNW RESET
Channel 10
E1 83 CH10 HI SET-P. VAL. START
E2 83 CH10 HI SET-P. VAL. RESET
E3 84 CH10 HI TRIP SET-P V START
E4 84 CH10 HI TRIP SET-P V RESET
E5 85 CH10 LO SET-P. VAL. START
E6 85 CH10 LO SET-P. VAL. RESET
E7 86 CH10 LO TRIP SET-P V START
E8 86 CH10 LO TRIP SET-P V RESET
E15 87 CH10 MEAS. DEVI. REG UPWARDS
E16 87 CH10 MEAS. DEVI. REG DOWNWARDS
E20 88 CH10 MEAS. RANGE UPW ACTIVE
E21 89 CH10 MEAS. RANGE DWNW ACTIVE
E23 90 CH10 TRIP. IND. OSC. ALARM
E24 88 CH10 MEAS. RANGE UPW RESET
E25 89 CH10 MEAS. RANGE DWNW RESET
Channel 11
E1 91 CH11 HI SET-P. VAL. START
E2 91 CH11 HI SET-P. VAL. RESET
E3 92 CH11 HI TRIP SET-P V START
E4 92 CH11 HI TRIP SET-P V RESET
E5 93 CH11 LO SET-P. VAL. START
E6 93 CH11 LO SET-P. VAL. RESET
E7 94 CH11 LO TRIP SET-P V START
E8 94 CH11 LO TRIP SET-P V RESET
E15 95 CH11 MEAS. DEVI. REG UPWARDS
E16 95 CH11 MEAS. DEVI. REG DOWNWARDS
E20 96 CH11 MEAS. RANGE UPW ACTIVE
E21 97 CH11 MEAS. RANGE DWNW ACTIVE
E23 98 CH11 TRIP. IND. OSC. ALARM
E24 96 CH11 MEAS. RANGE UPW RESET
E25 97 CH11 MEAS. RANGE DWNW RESET
Channel 12
E1 99 CH12 HI SET-P. VAL. START
E2 99 CH12 HI SET-P. VAL. RESET
E3 100 CH12 HI TRIP SET-P V START
E4 100 CH12 HI TRIP SET-P V RESET
E5 101 CH12 LO SET-P. VAL. START
E6 101 CH12 LO SET-P. VAL. RESET
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 45
E7 102 CH12 LO TRIP SET-P V START
E8 102 CH12 LO TRIP SET-P V RESET
E15 103 CH12 MEAS. DEVI. REG UPWARDS
E16 103 CH12 MEAS. DEVI. REG DOWNWARDS
E20 104 CH12 MEAS. RANGE UPW ACTIVE
E21 105 CH12 MEAS. RANGE DWNW ACTIVE
E23 106 CH12 TRIP. IND. OSC. ALARM
E24 104 CH12 MEAS. RANGE UPW RESET
E25 105 CH12 MEAS. RANGE DWNW RESET
Channel 13
E1 107 CH13 HI SET-P. VAL. START
E2 107 CH13 HI SET-P. VAL. RESET
E3 108 CH13 HI TRIP SET-P V START
E4 108 CH13 HI TRIP SET-P V RESET
E5 109 CH13 LO SET-P. VAL. START
E6 109 CH13 LO SET-P. VAL. RESET
E7 110 CH13 LO TRIP SET-P V START
E8 110 CH13 LO TRIP SET-P V RESET
E15 111 CH13 MEAS. DEVI. REG UPWARDS
E16 111 CH13 MEAS. DEVI. REG DOWNWARDS
E20 112 CH13 MEAS. RANGE UPW ACTIVE
E21 113 CH13 MEAS. RANGE DWNW ACTIVE
E23 114 CH13 TRIP. IND. OSC. ALARM
E24 112 CH13 MEAS. RANGE UPW RESET
E25 113 CH13 MEAS. RANGE DWNW RESET
Channel 14
E1 115 CH14 HI SET-P. VAL. START
E2 115 CH14 HI SET-P. VAL. RESET
E3 116 CH14 HI TRIP SET-P V START
E4 116 CH14 HI TRIP SET-P V RESET
E5 117 CH14 LO SET-P. VAL. START
E6 117 CH14 LO SET-P. VAL. RESET
E7 118 CH14 LO TRIP SET-P V START
E8 118 CH14 LO TRIP SET-P V RESET
E15 119 CH14 MEAS. DEVI. REG UPWARDS
E16 119 CH14 MEAS. DEVI. REG DOWNWARDS
E20 120 CH14 MEAS. RANGE UPW ACTIVE
E21 121 CH14 MEAS. RANGE DWNW ACTIVE
E23 122 CH14 TRIP. IND. OSC. ALARM
E24 120 CH14 MEAS. RANGE UPW RESET
E25 121 CH14 MEAS. RANGE DWNW RESET
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
46 ABB Automation
Channel 15
E1 123 CH15 HI SET-P. VAL. START
E2 123 CH15 HI SET-P. VAL. RESET
E3 124 CH15 HI TRIP SET-P V START
E4 124 CH15 HI TRIP SET-P V RESET
E5 125 CH15 LO SET-P. VAL. START
E6 125 CH15 LO SET-P. VAL. RESET
E7 126 CH15 LO TRIP SET-P V START
E8 126 CH15 LO TRIP SET-P V RESET
E15 127 CH15 MEAS. DEVI. REG UPWARDS
E16 127 CH15 MEAS. DEVI. REG DOWNWARDS
E20 128 CH15 MEAS. RANGE UPW ACTIVE
E21 129 CH15 MEAS. RANGE DWNW ACTIVE
E23 130 CH15 TRIP. IND. OSC. ALARM
E24 128 CH15 MEAS. RANGE UPW RESET
E25 129 CH15 MEAS. RANGE DWNW RESET
Channel 16
E1 131 CH16 HI SET-P. VAL. START
E2 131 CH16 HI SET-P. VAL. RESET
E3 132 CH16 HI TRIP SET-P V START
E4 132 CH16 HI TRIP SET-P V RESET
E5 133 CH16 LO SET-P. VAL. START
E6 133 CH16 LO SET-P. VAL. RESET
E7 134 CH16 LO TRIP SET-P V START
E8 134 CH16 LO TRIP SET-P V RESET
E15 135 CH16 MEAS. DEVI. REG UPWARDS
E16 135 CH16 MEAS. DEVI. REG DOWNWARDS
E20 136 CH16 MEAS. RANGE UPW ACTIVE
E21 137 CH16 MEAS. RANGE DWNW ACTIVE
E23 138 CH16 TRIP. IND. OSC. ALARM
E24 136 CH16 MEAS. RANGE UPW RESET
E25 137 CH16 MEAS. RANGE DWNW RESET
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 47
4.3.20 SACO16D2
E-code Index Object Text
E10 125 INT. UNIT FAULT
E13 126 EVENT REG. OVERFLOW
E50 220 RESTARTING
E51 221 REG. OVERFLOW
E52 222 COMMUNICATION
E53 223 RESPONDS FAILED
E54 223 RESPONDS AGAIN
Channel 1
E1 91 CH1 ALARM
E2 91 CH1 RESET
E3 91 CH1 ALARM
E4 91 CH1 RESET
Channel 2
E1 92 CH2 ALARM
E2 92 CH2 RESET
E3 92 CH2 ALARM
E4 92 CH2 RESET
Channel 3
E1 93 CH3 ALARM
E2 93 CH3 RESET
E3 93 CH3 ALARM
E4 93 CH3 RESET
Channel 4
E1 94 CH4 ALARM
E2 94 CH4 RESET
E3 94 CH4 ALARM
E4 94 CH4 RESET
Channel 5
E1 95 CH5 ALARM
E2 95 CH5 RESET
E3 95 CH5 ALARM
E4 95 CH5 RESET
Channel 6
E1 96 CH6 ALARM
E2 96 CH6 RESET
E3 96 CH6 ALARM
E4 96 CH6 RESET
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
48 ABB Automation
Channel 7
E1 97 CH7 ALARM
E2 97 CH7 RESET
E3 97 CH7 ALARM
E4 97 CH7 RESET
Channel 8
E1 98 CH8 ALARM
E2 98 CH8 RESET
E3 98 CH8 ALARM
E4 98 CH8 RESET
Channel 9
E1 99 CH9 ALARM
E2 99 CH9 RESET
E3 99 CH9 ALARM
E4 99 CH9 RESET
Channel 10
E1 100 CH10 ALARM
E2 100 CH10 RESET
E3 100 CH10 ALARM
E4 100 CH10 RESET
Channel 11
E1 101 CH11 ALARM
E2 101 CH11 RESET
E3 101 CH11 ALARM
E4 101 CH11 RESET
Channel 12
E1 102 CH12 ALARM
E2 102 CH12 RESET
E3 102 CH12 ALARM
E4 102 CH12 RESET
Channel 13
E1 103 CH13 ALARM
E2 103 CH13 RESET
E3 103 CH13 ALARM
E4 103 CH13 RESET
Channel 14
E1 104 CH14 ALARM
E2 104 CH14 RESET
E3 104 CH14 ALARM
E4 104 CH14 RESET
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 49
Channel 15
E1 105 CH15 ALARM
E2 105 CH15 RESET
E3 105 CH15 ALARM
E4 105 CH15 RESET
Channel 16
E1 106 CH16 ALARM
E2 106 CH16 RESET
E3 106 CH16 ALARM
E4 106 CH16 RESET
4.3.21 SACO16D1B
E-code Index Object Text
E10 79 INT. UNIT FAULT
E13 80 EVENT REG. OVERFLOW
E50 194 RESTARTING
E51 195 REG. OVERFLOW
E52 196 COMMUNICATION
E53 197 RESPONDS FAILED
E54 197 RESPONDS AGAIN
Channel 1
E1 81 CH1 ALARM
E2 81 CH1 RESET
E3 81 CH1 ALARM
E4 81 CH1 RESET
Channel 2
E1 82 CH2 ALARM
E2 82 CH2 RESET
E3 82 CH2 ALARM
E4 82 CH2 RESET
Channel 3
E1 83 CH3 ALARM
E2 83 CH3 RESET
E3 83 CH3 ALARM
E4 83 CH3 RESET
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
50 ABB Automation
Channel 4
E1 84 CH4 ALARM
E2 84 CH4 RESET
E3 84 CH4 ALARM
E4 84 CH4 RESET
Channel 5
E1 85 CH5 ALARM
E2 85 CH5 RESET
E3 85 CH5 ALARM
E4 85 CH5 RESET
Channel 6
E1 86 CH6 ALARM
E2 86 CH6 RESET
E3 86 CH6 ALARM
E4 86 CH6 RESET
Channel 7
E1 87 CH7 ALARM
E2 87 CH7 RESET
E3 87 CH7 ALARM
E4 87 CH7 RESET
Channel 8
E1 88 CH8 ALARM
E2 88 CH8 RESET
E3 88 CH8 ALARM
E4 88 CH8 RESET
Channel 9
E1 89 CH9 ALARM
E2 89 CH9 RESET
E3 89 CH9 ALARM
E4 89 CH9 RESET
Channel 10
E1 90 CH10 ALARM
E2 90 CH10 RESET
E3 90 CH10 ALARM
E4 90 CH10 RESET
Channel 11
E1 91 CH11 ALARM
E2 91 CH11 RESET
E3 91 CH11 ALARM
E4 91 CH11 RESET
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 51
Channel 12
E1 92 CH12 ALARM
E2 92 CH12 RESET
E3 92 CH12 ALARM
E4 92 CH12 RESET
Channel 13
E1 93 CH13 ALARM
E2 93 CH13 RESET
E3 93 CH13 ALARM
E4 93 CH13 RESET
Channel 14
E1 94 CH14 ALARM
E2 94 CH14 RESET
E3 94 CH14 ALARM
E4 94 CH14 RESET
Channel 15
E1 95 CH15 ALARM
E2 95 CH15 RESET
E3 95 CH15 ALARM
E4 95 CH15 RESET
Channel 16
E1 96 CH16 ALARM
E2 96 CH16 RESET
E3 96 CH16 ALARM
E4 96 CH16 RESET
4.3.22 SACO16D2B
E-code Index Object Text
E10 100 INT. UNIT FAULT
E13 101 EVENT REG. OVERFLOW
E50 198 RESTARTING
E51 199 REG. OVERFLOW
E52 200 COMMUNICATION
E53 201 RESPONDS FAILED
E54 201 RESPONDS AGAIN
Channel 1
E1 102 CH1 ALARM
E2 102 CH1 RESET
E3 102 CH1 ALARM
E4 102 CH1 RESET
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
52 ABB Automation
Channel 2
E1 103 CH2 ALARM
E2 103 CH2 RESET
E3 103 CH2 ALARM
E4 103 CH2 RESET
Channel 3
E1 104 CH3 ALARM
E2 104 CH3 RESET
E3 104 CH3 ALARM
E4 104 CH3 RESET
Channel 4
E1 105 CH4 ALARM
E2 105 CH4 RESET
E3 105 CH4 ALARM
E4 105 CH4 RESET
Channel 5
E1 106 CH5 ALARM
E2 106 CH5 RESET
E3 106 CH5 ALARM
E4 106 CH5 RESET
Channel 6
E1 107 CH6 ALARM
E2 107 CH6 RESET
E3 107 CH6 ALARM
E4 107 CH6 RESET
Channel 7
E1 108 CH7 ALARM
E2 108 CH7 RESET
E3 108 CH7 ALARM
E4 108 CH7 RESET
Channel 8
E1 109 CH8 ALARM
E2 109 CH8 RESET
E3 109 CH8 ALARM
E4 109 CH8 RESET
Channel 9
E1 110 CH9 ALARM
E2 110 CH9 RESET
E3 110 CH9 ALARM
E4 110 CH9 RESET
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 53
Channel 10
E1 111 CH10 ALARM
E2 111 CH10 RESET
E3 111 CH10 ALARM
E4 111 CH10 RESET
Channel 11
E1 112 CH11 ALARM
E2 112 CH11 RESET
E3 112 CH11 ALARM
E4 112 CH11 RESET
Channel 12
E1 113 CH12 ALARM
E2 113 CH12 RESET
E3 113 CH12 ALARM
E4 113 CH12 RESET
Channel 13
E1 114 CH13 ALARM
E2 114 CH13 RESET
E3 114 CH13 ALARM
E4 114 CH13 RESET
Channel 14
E1 115 CH14 ALARM
E2 115 CH14 RESET
E3 115 CH14 ALARM
E4 115 CH14 RESET
Channel 15
E1 116 CH15 ALARM
E2 116 CH15 RESET
E3 116 CH15 ALARM
E4 116 CH15 RESET
Channel 16
E1 117 CH16 ALARM
E2 117 CH16 RESET
E3 117 CH16 ALARM
E4 117 CH16 RESET
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
54 ABB Automation
4.3.23 SPCP3C2
E-code Index Object Text
E1 61 U>, U>> START ON
E2 61 U>, U>> START OFF
E3 62 U>, U>> TRIP ON
E4 62 U>, U>> TRIP OFF
E5 63 REV. POWER START ON
E6 63 REV. POWER START OFF
E7 64 REV. POWER TRIP ON
E8 64 REV. POWER TRIP OFF
E50 200 RESTARTING
E51 201 REG. OVERFLOW
E52 202 COMMUNICATION
E53 203 RESPONDS FAILED
E54 203 RESPONDS AGAIN
4.3.24 SPCS2D37
E-code Index Object Text
E1 11 I01> START ON
E2 11 I01> START OFF
E3 12 I01> FIRST TRIP ON
E4 12 I01> FIRST TRIP OFF
E7 14 I01> SECOND TRIP ON
E8 14 I01> SECOND TRIP OFF
E9 15 I02> START ON
E10 15 I02> START OFF
E11 16 I02> TRIP ON
E12 16 I02> TRIP OFF
E13 17 I03> START ON
E14 17 I03> START OFF
E15 18 I03> TRIP ON
E16 18 I03> TRIP OFF
E17 19 OUTPUT SS1 ON
E18 19 OUTPUT SS1 OFF
E19 20 OUTPUT TS1 ON
E20 20 OUTPUT TS1 OFF
E21 21 OUTPUT SS2 ON
E22 21 OUTPUT SS2 OFF
E23 22 OUTPUT TS2 ON
E24 22 OUTPUT TS2 OFF
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 55
E25 23 OUTPUT SS3 ON
E26 23 OUTPUT SS3 OFF
E27 24 OUTPUT TS3 ON
E28 24 OUTPUT TS3 OFF
E29 25 OUTPUT SS4 ON
E30 25 OUTPUT SS4 OFF
E31 26 OUTPUT TS4 ON
E32 26 OUTPUT TS4 OFF
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
4.3.25 SPCS3C4
E-code Index Object Text
E1 28 IF> START ON
E2 28 IF> START OFF
E3 29 IF> TRIP ON
E4 29 IF> TRIP OFF
E5 30 IF>> START ON
E6 30 IF>> START OFF
E7 31 IF>> TRIP ON
E8 31 IF>> TRIP OFF
E50 200 RESTARTING
E51 201 REG. OVERFLOW
E52 202 COMMUNICATION
E53 203 RESPONDS FAILED
E54 203 RESPONDS AGAIN
4.3.26 SPCS4D11
E-code Index Object Text
E1 109 I> START FORWARD ON
E2 109 I> START FORWARD OFF
E3 110 I> START REVERSE ON
E4 110 I> START REVERSE OFF
E5 111 I> TRIP ON
E6 111 I> TRIP OFF
E7 112 I>> START ON
E8 112 I>> START OFF
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
56 ABB Automation
E9 113 I>> TRIP ON
E10 113 I>> TRIP OFF
E11 114 I>>> START ON
E12 114 I>>> START OFF
E13 115 I>>> TRIP ON
E14 115 I>>> TRIP OFF
E15 116
E16 116
E17 117 OUTPUT TS1 ON
E18 117 OUTPUT TS1 OFF
E19 118 OUTPUT SS1 ON
E20 118 OUTPUT SS1 OFF
E21 119 OUTPUT SS2 ON
E22 119 OUTPUT SS2 OFF
E23 120 OUTPUT SS3 ON
E24 120 OUTPUT SS3 OFF
E25 121 OUTPUT TS2 ON
E26 121 OUTPUT TS2 OFF
E50 224 RESTARTING
E51 225 REG. OVERFLOW
E52 226 COMMUNICATION
E53 227 RESPONDS FAILED
E54 227 RESPONDS AGAIN
4.3.27 SPCS4D12
E-code Index Object Text
E1 122 I> START FORWARD ON
E2 122 I> START FORWARD OFF
E3 123 I> START REVERSE ON
E4 123 I> START REVERSE OFF
E5 124 I> TRIP ON
E6 124 I> TRIP OFF
E7 125 I>> START ON
E8 125 I>> START OFF
E9 126 I>> TRIP ON
E10 126 I>> TRIP OFF
E11 127 I>>> START ON
E12 127 I>>> START OFF
E13 128 I>>> TRIP ON
E14 128 I>>> TRIP OFF
E15 129
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 57
E16 129
E17 130 OUTPUT TS1 ON
E18 130 OUTPUT TS1 OFF
E19 131 OUTPUT SS1 ON
E20 131 OUTPUT SS1 OFF
E21 132 OUTPUT SS2 ON
E22 132 OUTPUT SS2 OFF
E23 133 OUTPUT SS3 ON
E24 133 OUTPUT SS3 OFF
E25 134 OUTPUT TS2 ON
E26 134 OUTPUT TS2 OFF
E50 228 RESTARTING
E51 229 REG. OVERFLOW
E52 230 COMMUNICATION
E53 231 RESPONDS FAILED
E54 231 RESPONDS AGAIN
4.3.28 SPCS4D13
E-code Index Object Text
E1 135 I> START FORWARD ON
E2 135 I> START FORWARD OFF
E3 136 I> START REVERSE ON
E4 136 I> START REVERSE OFF
E5 137 I> TRIP ON
E6 137 I> TRIP OFF
E7 138 I>> START ON
E8 138 I>> START OFF
E9 139 I>> TRIP ON
E10 139 I>> TRIP OFF
E11 140 I>>> START ON
E12 140 I>>> START OFF
E13 141 I>>> TRIP ON
E14 141 I>>> TRIP OFF
E15 142
E16 142
E17 143 OUTPUT TS1 ON
E18 143 OUTPUT TS1 OFF
E19 144 OUTPUT SS1 ON
E20 144 OUTPUT SS1 OFF
E21 145 OUTPUT SS2 ON
E22 145 OUTPUT SS2 OFF
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
58 ABB Automation
E23 146 OUTPUT SS3 ON
E24 146 OUTPUT SS3 OFF
E25 147 OUTPUT TS2 ON
E26 147 OUTPUT TS2 OFF
E50 232 RESTARTING
E51 233 REG. OVERFLOW
E52 234 COMMUNICATION
E53 235 RESPONDS FAILED
E54 235 RESPONDS AGAIN
4.3.29 SPCT2C17
E-code Index Object Text
E1 151 AR START ON
E2 151 AR START OFF
E3 152 CLOSING CB
E4 152 CLOSING CB RESET
E5 153 ALARM
E6 153 ALARM RESET
E7 154 OPENING CB
E8 154 OPENING CB RESET
E9 155 DEF. TRIPPING CB
E10 156 MANUAL OPENING CB
E11 156 MANUAL OPENING CB RESET
E50 216 RESTARTING
E51 217 REG. OVERFLOW
E52 218 COMMUNICATION
E53 219 RESPONDS FAILED
E54 219 RESPONDS AGAIN
4.3.30 SPCT2C5
E-code Index Object Text
E1 65 AR START ON
E2 65 AR START OFF
E3 66 CLOSING CB
E4 66 CLOSING CB RESET
E5 67 ALARM
E6 67 ALARM RESET
E7 68 OPENING CB
E8 68 OPENING CB RESET
E50 197 RESTARTING
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 59
E51 198 REG. OVERFLOW
E52 199 COMMUNICATION
E53 200 RESPONDS FAILED
E54 200 RESPONDS AGAIN
4.3.31 SPCT2D38
E-code Index Object Text
E1 70 HSAR START ON
E2 70 HSAR START OFF
E3 71 HSAR STARTED BY AR1
E4 72 HSAR STARTED BY AR2
E5 73 HSAR STARTED BY AR3
E6 74 SSAR START ON
E7 74 SSAR START OFF
E8 75 SSAR STARTED BY AR1
E9 76 SSAR STARTED BY AR2
E10 77 SSAR STARTED BY AR3
E11 78 DELAYED SSAR STARTED
E12 78 DELAYED SSAR RESET
E13 79 DEL. SSAR ST. BY AR1
E14 80 DEL. SSAR ST. BY AR2
E15 81 DEL. SSAR ST. BY AR3
E16 82 AUTO RECLOSE ON
E17 82 AUTO RECLOSE OFF
E18 83 AR INHIBITED
E19 83 AR RESETTED
E20 84 CB TRIPPING FAILED
E21 85 CB CLOSING ACTIVATED
E22 85 CB CLOSING RESET
E23 86 CB OPEN FAILED
E24 87 ARF ON
E25 87 ARF OFF
E26 88 DEF. CB TRIPPING
E27 89 NON-AR CB CLOSING
E28 90 NON-PROTEC. CB OPEN.
E50 201 RESTARTING
E51 202 REG. OVERFLOW
E52 203 COMMUNICATION
E53 204 RESPONDS FAILED
E54 204 RESPONDS AGAIN
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
60 ABB Automation
4.3.32 SPCT2D46
E-code Index Object Text
E1 91 HSAR FORWARD STARTED
E2 91 HSAR FORWARD RESET
E3 92 HSAR STARTED BY AR1
E4 93 HSAR STARTED BY AR2
E5 94 HSAR STARTED BY AR3
E6 95 SSAR START ON
E7 95 SSAR START OFF
E8 96 SSAR STARTED BY AR1
E9 97 SSAR STARTED BY AR2
E10 98 SSAR STARTED BY AR3
E11 99 TD TIME STARTED
E12 99 TD TIME RESET
E13 100 TN TIME STARTED
E14 100 TN TIME RESET
E15 101 DEFINITE CB TRIPPING
E16 102 DEF. CB TRIP. BY AR1
E17 103 DEF. CB TRIP. BY AR2
E18 104 DEF. CB TRIP. BY AR3
E19 105 AUTO RECLOSE ON
E20 105 AUTO RECLOSE OFF
E21 106 CB CLOSING ACTIVATED
E22 106 CB CLOSING RESET
E23 107 CB OPEN FAILED
E24 108 CB CLOSING FAILED
E25 109 AR INTERRUPTED
E26 110 INT. BLOCKING RESET
E27 111 NON-AR CB CLOSING
E28 112 NON-PROTEC. CB OPEN.
E50 205 RESTARTING
E51 206 REG. OVERFLOW
E52 207 COMMUNICATION
E53 208 RESPONDS FAILED
E54 208 RESPONDS AGAIN
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 61
4.3.33 SPCU1C1
E-code Index Object Text
E1 11 U> START ON
E2 11 U> START OFF
E3 12 U> TRIP ON
E4 12 U> TRIP OFF
E5 13 U< START ON
E6 13 U< START OFF
E7 14 U< TRIP ON
E8 14 U< TRIP OFF
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
4.3.34 SPCU1C6
E-code Index Object Text
E1 15 U0> START ON
E2 15 U0> START OFF
E3 16 U0> TRIP ON
E4 16 U0> TRIP OFF
E5 17 U0>> START ON
E6 17 U0>> START OFF
E7 18 U0>> TRIP ON
E8 18 U0>> TRIP OFF
E50 184 RESTARTING
E51 185 REG. OVERFLOW
E52 186 COMMUNICATION
E53 187 RESPONDS FAILED
E54 187 RESPONDS AGAIN
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
62 ABB Automation
4.3.35 SPCU1D39
E-code Index Object Text
E9 119 U0> START ON
E10 119 U0> START OFF
E11 120 U0> FIRST TRIP ON
E12 120 U0> FIRST TRIP OFF
E17 123 OUTPUT SS1 ON
E18 123 OUTPUT SS1 OFF
E19 124 OUTPUT TS1 ON
E20 124 OUTPUT TS1 OFF
E21 125 OUTPUT SS2 ON
E22 125 OUTPUT SS2 OFF
E23 126 OUTPUT TS2 ON
E24 126 OUTPUT TS2 OFF
E25 127 OUTPUT SS3 ON
E26 127 OUTPUT SS3 OFF
E27 128 OUTPUT TS3 ON
E28 128 OUTPUT TS3 OFF
E29 129 OUTPUT SS4 ON
E30 129 OUTPUT SS4 OFF
E31 130 OUTPUT TS4 ON
E32 130 OUTPUT TS4 OFF
E50 209 RESTARTING
E51 210 REG. OVERFLOW
E52 211 COMMUNICATION
E53 212 RESPONDS FAILED
E54 212 RESPONDS AGAIN
4.3.36 SPCU1D47
E-code Index Object Text
E9 135 U0> START ON
E10 135 U0> START OFF
E11 136 U0> FIRST TRIP ON
E12 136 U0> FIRST TRIP OFF
E17 139 OUTPUT SS1 ON
E18 139 OUTPUT SS1 OFF
E19 140 OUTPUT TS1 ON
E20 140 OUTPUT TS1 OFF
E21 141 OUTPUT SS2 ON
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 63
E22 141 OUTPUT SS2 OFF
E23 142 OUTPUT TS2 ON
E24 142 OUTPUT TS2 OFF
E25 143 OUTPUT SS3 ON
E26 143 OUTPUT SS3 OFF
E27 144 OUTPUT TS3 ON
E28 144 OUTPUT TS3 OFF
E29 145 OUTPUT SS4 ON
E30 145 OUTPUT SS4 OFF
E31 146 OUTPUT TS4 ON
E32 146 OUTPUT TS4 OFF
E50 213 RESTARTING
E51 214 REG. OVERFLOW
E52 215 COMMUNICATION
E53 216 RESPONDS FAILED
E54 216 RESPONDS AGAIN
4.3.37 SPCU3C14
E-code Index Object Text
E1 19 U> START ON
E2 19 U> START OFF
E3 20 U> TRIP ON
E4 20 U> TRIP OFF
E5 21 U< START ON
E6 21 U< START OFF
E7 22 U< TRIP ON
E8 22 U< TRIP OFF
E50 188 RESTARTING
E51 189 REG. OVERFLOW
E52 190 COMMUNICATION
E53 191 RESPONDS FAILED
E54 191 RESPONDS AGAIN
4.3.38 SPCU3C15
E-code Index Object Text
E1 23 U< START ON
E2 23 U< START OFF
E3 24 U< TRIP ON
E4 24 U< TRIP OFF
E5 25 3U<< START ON
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
64 ABB Automation
E6 25 3U<< START OFF
E7 26 3U<< TRIP ON
E8 26 3U<< TRIP OFF
E50 192 RESTARTING
E51 193 REG. OVERFLOW
E52 194 COMMUNICATION
E53 195 RESPONDS FAILED
E54 195 RESPONDS AGAIN
4.3.39 SPCU3D45
E-code Index Object Text
E1 150 SC13 START ON
E2 150 SC13 START OFF
E3 151 SC13 CLOSE ON
E4 152 VC13 START ON
E5 152 VC13 START OFF
E6 153 VC13 CLOSE ON
E7 154 SC23 START ON
E8 154 SC23 START OFF
E9 155 SC23 CLOSE ON
E10 156 VC23 START ON
E11 156 VC23 START OFF
E12 157 VC23 CLOSE ON
E13 158 BS13 ON
E14 158 BS13 OFF
E15 159 CS13 ON
E16 159 CS13 OFF
E17 160 BS23 ON
E18 160 BS23 OFF
E19 161 CS23 ON
E20 161 CS23 OFF
E21 162 CB13 ON
E22 162 CB13 OFF
E23 163 CB23 ON
E24 163 CB23 OFF
E25 164 ALARM ON
E26 164 ALARM OFF
E50 217 RESTARTING
E51 218 REG. OVERFLOW
E52 219 COMMUNICATION
E53 220 RESPONDS FAILED
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 65
E54 220 RESPONDS AGAIN
4.3.40 SPTO1C1
E-code Index Object Text
E1 10 EARTHING DISCON. OPEN
E2 10 EARTHING DISCON. CLOSED
E3 10 EARTHING DISCON. UNDEF.
Channel 1
E1 21 CB 1 OPEN
E2 21 CB 1 CLOSE
E3 21 CB 1 UNDEF.
E4 24 TRUCK 1 OPEN
E5 24 TRUCK 1 CLOSE
E6 24 TRUCK 1 UNDEF.
E7 27 CH1 CONTROL BLOCKED
E8 28 CH1 CONTROL FAILURE
E9 29 CH1 NOT IN ALERT ST.
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
66 ABB Automation
4.3.41 SPTO1C4
E-code Index Object Text
E1 11 EARTHING DISCON. OPEN
E2 11 EARTHING DISCON. CLOSED
E3 11 EARTHING DISCON. UNDEF.
Channel 1
E1 12 CB 1 OPEN
E2 12 CB 1 CLOSE
E3 12 CB 1 UNDEF.
E4 13 BUSBAR DISC. 1 OPEN
E5 13 BUSBAR DISC. 1 CLOSE
E6 13 BUSBAR DISC. 1 UNDEF.
E7 14 CB1 CONTROL BLOCKED
E8 15 CB1 CONTROL FAILURE
E9 16 CB1 NOT IN ALERT ST.
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
4.3.42 SPTO1D2
E-code Index Object Text
E1 10 KEY SWITCH L/R
E2 10 KEY SWITCH L/R
E3 12 TEST SWITCH (SG1/1) ON
E4 12 TEST SWITCH (SG1/1) OFF
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
Channel 1
E1 55 CH1 STATUS OPEN
E2 55 CH1 STATUS CLOSED
E3 55 CH1 STATUS UNDEF.
E4 55 CH1 STATUS UNDEF.
E5 59 CH1 OPEN ACTIVATED
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 67
E6 59 CH1 OPEN RESET
E7 61 CH1 CLOSE ACTIVATED
E8 61 CH1 CLOSE RESET
E9 63 CH1 ACTIV. INHIB.
E10 64 CH1 ACTIV. FAILED
E11 65 CH1 ACT. W.OUT SEL.
Channel 2
E1 66 CH2 STATUS OPEN
E2 66 CH2 STATUS CLOSED
E3 66 CH2 STATUS UNDEF.
E4 66 CH2 STATUS UNDEF.
E5 70 CH2 OPEN ACTIVATED
E6 70 CH2 OPEN RESET
E7 72 CH2 CLOSE ACTIVATED
E8 72 CH2 CLOSE RESET
E9 74 CH2 ACTIV. INHIB.
E10 75 CH2 ACTIV. FAILED
E11 76 CH2 ACT. W.OUT SEL.
Channel 3
E1 77 CH3 STATUS OPEN
E2 77 CH3 STATUS CLOSED
E3 77 CH3 STATUS UNDEF.
E4 77 CH3 STATUS UNDEF.
E5 81 CH3 OPEN ACTIVATED
E6 81 CH3 OPEN RESET
E7 83 CH3 CLOSE ACTIVATED
E8 83 CH3 CLOSE RESET
E9 85 CH3 ACTIV. INHIB.
E10 86 CH3 ACTIV. FAILED
E11 87 CH3 ACT. W.OUT SEL.
Channel 4
E1 88 CH4 INPUT ACTIVATED
E2 88 CH4 INPUT RESET
E3 90 CH4 SIGNAL 1 .. 3 ACTIVATED
E4 90 CH4 SIGNAL 1 .. 3 RESET
Channel 5
E1 92 CH5 INPUT ACTIVATED
E2 92 CH5 INPUT RESET
E3 94 CH5 SIGNAL 1 .. 3 ACTIVATED
E4 94 CH5 SIGNAL 1 .. 3 RESET
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
68 ABB Automation
Channel 6
E1 96 CH6 INPUT ACTIVATED
E2 96 CH6 INPUT RESET
E3 98 CH6 SIGNAL 1 .. 3 ACTIVATED
E4 98 CH6 SIGNAL 1 .. 3 RESET
Channel 7
E1 100 CH7 INPUT ACTIVATED
E2 100 CH7 INPUT RESET
E3 102 CH7 SIGNAL 1 .. 3 ACTIVATED
E4 102 CH7 SIGNAL 1 .. 3 RESET
Channel 8
E1 104 CH8 INPUT ACTIVATED
E2 104 CH8 INPUT RESET
E3 106 CH8 SIGNAL 1 .. 3 ACTIVATED
E4 106 CH8 SIGNAL 1 .. 3 RESET
Channel 9
E1 108 CH9 INPUT ACTIVATED
E2 108 CH9 INPUT RESET
E3 110 CH9 SIGNAL 1 .. 3 ACTIVATED
E4 110 CH9 SIGNAL 1 .. 3 RESET
Channel 10
E1 112 CH10 INPUT ACTIVATED
E2 112 CH10 INPUT RESET
E3 114 CH10 SIGNAL 1 .. 3 ACTIVATED
E4 114 CH10 SIGNAL 1 .. 3 RESET
Channel 11
E1 116 CH11 INPUT ACTIVATED
E2 116 CH11 INPUT RESET
E3 118 CH11 SIGNAL 1 .. 3 ACTIVATED
E4 118 CH11 SIGNAL 1 .. 3 RESET
Channel 12
E1 120 CH12 INPUT ACTIVATED
E2 120 CH12 INPUT RESET
E3 122 CH12 SIGNAL 1 .. 3 ACTIVATED
E4 122 CH12 SIGNAL 1 .. 3 RESET
Channel 13
E1 124 CH13 INPUT ACTIVATED
E2 124 CH13 INPUT RESET
E3 126 CH13 SIGNAL 1 .. 3 ACTIVATED
E4 126 CH13 SIGNAL 1 .. 3 RESET
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 69
4.3.43 SPTO1D5
E-code Index Object Text
E1 20 KEY SWITCH L/R
E2 20 KEY SWITCH L/R
E3 21 TEST SWITCH (SG1/1) ON
E4 21 TEST SWITCH (SG1/1) OFF
E50 184 RESTARTING
E51 185 REG. OVERFLOW
E52 186 COMMUNICATION
E53 187 RESPONDS FAILED
E54 187 RESPONDS AGAIN
Channel 1
E1 22 CH1 STATUS OPEN
E2 22 CH1 STATUS CLOSED
E3 22 CH1 STATUS UNDEF.
E4 22 CH1 STATUS UNDEF.
E5 23 CH1 OPEN ACTIVATED
E6 23 CH1 OPEN RESET
E7 24 CH1 CLOSE ACTIVATED
E8 24 CH1 CLOSE RESET
E9 25 CH1 ACTIV. INHIB.
E10 26 CH1 ACTIV. FAILED
E11 27 CH1 ACT. W.OUT SEL.
Channel 2
E1 28 CH2 STATUS OPEN
E2 28 CH2 STATUS CLOSED
E3 28 CH2 STATUS UNDEF.
E4 28 CH2 STATUS UNDEF.
E5 29 CH2 OPEN ACTIVATED
E6 29 CH2 OPEN RESET
E7 30 CH2 CLOSE ACTIVATED
E8 30 CH2 CLOSE RESET
E9 31 CH2 ACTIV. INHIB.
E10 32 CH2 ACTIV. FAILED
E11 33 CH2 ACT. W.OUT SEL.
Channel 3
E1 34 CH3 STATUS OPEN
E2 34 CH3 STATUS CLOSED
E3 34 CH3 STATUS UNDEF.
E4 34 CH3 STATUS UNDEF.
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
70 ABB Automation
E5 35 CH3 OPEN ACTIVATED
E6 35 CH3 OPEN RESET
E7 36 CH3 CLOSE ACTIVATED
E8 36 CH3 CLOSE RESET
E9 37 CH3 ACTIV. INHIB.
E10 38 CH3 ACTIV. FAILED
E11 39 CH3 ACT. W.OUT SEL.
Channel 4
E1 40 CH4 INPUT ACTIVATED
E2 40 CH4 INPUT RESET
E3 41 CH4 SIGNAL 1 .. 3 ACTIVATED
E4 41 CH4 SIGNAL 1 .. 3 RESET
Channel 5
E1 42 CH5 INPUT ACTIVATED
E2 42 CH5 INPUT RESET
E3 43 CH5 SIGNAL 1 .. 3 ACTIVATED
E4 43 CH5 SIGNAL 1 .. 3 RESET
Channel 6
E1 44 CH6 INPUT ACTIVATED
E2 44 CH6 INPUT RESET
E3 45 CH6 SIGNAL 1 .. 3 ACTIVATED
E4 45 CH6 SIGNAL 1 .. 3 RESET
Channel 7
E1 46 CH7 INPUT ACTIVATED
E2 46 CH7 INPUT RESET
E3 47 CH7 SIGNAL 1 .. 3 ACTIVATED
E4 47 CH7 SIGNAL 1 .. 3 RESET
Channel 8
E1 48 CH8 INPUT ACTIVATED
E2 48 CH8 INPUT RESET
E3 49 CH8 SIGNAL 1 .. 3 ACTIVATED
E4 49 CH8 SIGNAL 1 .. 3 RESET
Channel 9
E1 50 CH9 INPUT ACTIVATED
E2 50 CH9 INPUT RESET
E3 51 CH9 SIGNAL 1 .. 3 ACTIVATED
E4 51 CH9 SIGNAL 1 .. 3 RESET
Channel 10
E1 52 CH10 INPUT ACTIVATED
E2 52 CH10 INPUT RESET
E3 53 CH10 SIGNAL 1 .. 3 ACTIVATED
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 71
E4 53 CH10 SIGNAL 1 .. 3 RESET
Channel 11
E1 54 CH11 INPUT ACTIVATED
E2 54 CH11 INPUT RESET
E3 55 CH11 SIGNAL 1 .. 3 ACTIVATED
E4 55 CH11 SIGNAL 1 .. 3 RESET
Channel 12
E1 56 CH12 INPUT ACTIVATED
E2 56 CH12 INPUT RESET
E3 57 CH12 SIGNAL 1 .. 3 ACTIVATED
E4 57 CH12 SIGNAL 1 .. 3 RESET
Channel 13
E1 58 CH13 INPUT ACTIVATED
E2 58 CH13 INPUT RESET
E3 59 CH13 SIGNAL 1 .. 3 ACTIVATED
E4 59 CH13 SIGNAL 1 .. 3 RESET
4.3.44 SPTO1D6
E-code Index Object Text
E1 10 KEY SWITCH L/R
E2 10 KEY SWITCH L/R
E3 12 TEST SWITCH (SG1/1) ON
E4 12 TEST SWITCH (SG1/1) OFF
E5 14 SWICH (SG1/2) ON
E6 14 SWICH (SG1/2) OFF
E7 16 TRIP CIRCUIT FAILURE
E8 16 TRIP CIRCUIT FAILURE RESET
E9 18 CURRENT INPUT FAIL.
E10 18 CURRENT INPUT FAIL. RESET
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
Channel 1
E1 55 CH1 STATUS OPEN
E2 55 CH1 STATUS CLOSED
E3 55 CH1 STATUS UNDEF.
E4 55 CH1 STATUS UNDEF.
E5 59 CH1 OPEN ACTIVATED
E6 59 CH1 OPEN RESET
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
72 ABB Automation
E7 61 CH1 CLOSE ACTIVATED
E8 61 CH1 CLOSE RESET
E9 63 CH1 ACTIV. INHIB.
E10 64 CH1 ACTIV. FAILED
E11 65 CH1 ACT. W.OUT SEL.
Channel 2
E1 66 CH2 STATUS OPEN
E2 66 CH2 STATUS CLOSED
E3 66 CH2 STATUS UNDEF.
E4 66 CH2 STATUS UNDEF.
E5 70 CH2 OPEN ACTIVATED
E6 70 CH2 OPEN RESET
E7 72 CH2 CLOSE ACTIVATED
E8 72 CH2 CLOSE RESET
E9 74 CH2 ACTIV. INHIB.
E10 75 CH2 ACTIV. FAILED
E11 76 CH2 ACT. W.OUT SEL.
Channel 3
E1 77 CH3 STATUS OPEN
E2 77 CH3 STATUS CLOSED
E3 77 CH3 STATUS UNDEF.
E4 77 CH3 STATUS UNDEF.
E5 81 CH3 OPEN ACTIVATED
E6 81 CH3 OPEN RESET
E7 83 CH3 CLOSE ACTIVATED
E8 83 CH3 CLOSE RESET
E9 85 CH3 ACTIV. INHIB.
E10 86 CH3 ACTIV. FAILED
E11 87 CH3 ACT. W.OUT SEL.
Channel 4
E1 88 CH4 INPUT ACTIVATED
E2 88 CH4 INPUT RESET
E3 90 CH4 SIGNAL 1 .. 4 ACTIVATED
E4 90 CH4 SIGNAL 1 .. 4 RESET
Channel 5
E1 92 CH5 INPUT ACTIVATED
E2 92 CH5 INPUT RESET
E3 94 CH5 SIGNAL 1 .. 4 ACTIVATED
E4 94 CH5 SIGNAL 1 .. 4 RESET
Channel 6
E1 96 CH6 INPUT ACTIVATED
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 73
E2 96 CH6 INPUT RESET
E3 98 CH6 SIGNAL 1 .. 4 ACTIVATED
E4 98 CH6 SIGNAL 1 .. 4 RESET
Channel 7
E1 100 CH7 INPUT ACTIVATED
E2 100 CH7 INPUT RESET
E3 102 CH7 SIGNAL 1 .. 4 ACTIVATED
E4 102 CH7 SIGNAL 1 .. 4 RESET
Channel 8
E1 104 CH8 INPUT ACTIVATED
E2 104 CH8 INPUT RESET
E3 106 CH8 SIGNAL 1 .. 4 ACTIVATED
E4 106 CH8 SIGNAL 1 .. 4 RESET
Channel 9
E1 108 CH9 INPUT ACTIVATED
E2 108 CH9 INPUT RESET
E3 110 CH9 SIGNAL 1 .. 4 ACTIVATED
E4 110 CH9 SIGNAL 1 .. 4 RESET
Channel 10
E1 112 CH10 INPUT ACTIVATED
E2 112 CH10 INPUT RESET
E3 114 CH10 SIGNAL 1 .. 4 ACTIVATED
E4 114 CH10 SIGNAL 1 .. 4 RESET
Channel 11
E1 116 CH11 INPUT ACTIVATED
E2 116 CH11 INPUT RESET
E3 118 CH11 SIGNAL 1 .. 4 ACTIVATED
E4 118 CH11 SIGNAL 1 .. 4 RESET
Channel 12
E1 120 CH12 INPUT ACTIVATED
E2 120 CH12 INPUT RESET
E3 122 CH12 SIGNAL 1 .. 4 ACTIVATED
E4 122 CH12 SIGNAL 1 .. 4 RESET
Channel 13
E1 124 CH13 INPUT ACTIVATED
E2 124 CH13 INPUT RESET
E3 126 CH13 SIGNAL 1 .. 4 ACTIVATED
E4 126 CH13 SIGNAL 1 .. 4 RESET
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
74 ABB Automation
4.3.45 SPTO2C2
E-code Index Object Text
E1 10 EARTHING DISCON. OPEN
E2 10 EARTHING DISCON. CLOSED
E3 10 EARTHING DISCON. UNDEF.
Channel 1
E1 21 CB 1 OPEN
E2 21 CB 1 CLOSE
E3 21 CB 1 UNDEF.
E4 24 TRUCK 1 OPEN
E5 24 TRUCK 1 CLOSE
E6 24 TRUCK 1 UNDEF.
E7 27 CH1 CONTROL BLOCKED
E8 28 CH1 CONTROL FAILURE
E9 29 CH1 NOT IN ALERT ST.
Channel 2
E1 30 CB 2 OPEN
E2 30 CB 2 CLOSE
E3 30 CB 2 UNDEF.
E4 33 TRUCK 2 OPEN
E5 33 TRUCK 2 CLOSE
E6 33 TRUCK 2 UNDEF.
E7 36 CH2 CONTROL BLOCKED
E8 37 CH2 CONTROL FAILURE
E9 38 CH2 NOT IN ALERT ST.
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
4.3.46 SPTO6D3
E-code Index Object Text
E1 10 KEY SWITCH L/R
E2 10 KEY SWITCH L/R
E3 12 TEST SWITCH (SG1/1) ON
E4 12 TEST SWITCH (SG1/1) OFF
E5 14 AUTO-RECLOSE ON
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 75
E6 14 AUTO-RECLOSE OFF
E7 16 AR INTERRUPTED
E8 17 AR INTER. BY O COM.
E9 18 AR INTER. BY ARINH
E10 19 FAILED C COM. BY AR
E11 20 SHOT 1 IN PROGRESS
E12 21 CB CLOSED BY SHOT 1
E13 22 SHOT 1 BY SIGN. AR1
E14 23 SHOT 1 BY SIGN. AR2
E15 24 SHOT 1 BY SIGN. AR3
E16 25 SHOT 2 IN PROGRESS
E17 26 CB CLOSED BY SHOT 2
E18 27 SHOT 2 BY SIGN. AR1
E19 28 SHOT 2 BY SIGN. AR2
E20 29 SHOT 2 BY SIGN. AR3
E21 30 SHOT 3 IN PROGRESS
E22 31 CB CLOSED BY SHOT 3
E23 32 SHOT 3 BY SIGN. AR1
E24 33 SHOT 3 BY SIGN. AR2
E25 34 SHOT 3 BY SIGN. AR3
E26 35 SHOT 4 IN PROGRESS
E27 36 CB CLOSED BY SHOT 4
E28 37 SHOT 4 BY SIGN. AR1
E29 38 SHOT 4 BY SIGN. AR2
E30 39 SHOT 4 BY SIGN. AR3
E31 40 SHOT 5 IN PROGRESS
E32 41 CB CLOSED BY SHOT 5
E33 42 SHOT 5 BY SIGN. AR1
E34 43 SHOT 5 BY SIGN. AR2
E35 44 SHOT 5 BY SIGN. AR3
E36 45 FINAL TRIP BY AR1
E37 46 FINAL TRIP BY AR2
E38 47 FINAL TRIP BY AR3
E39 48 FINAL TRIP BY H-SET
E40 49 FINAL TRIP BY L-SET
E41 50 FINAL TRIP BY E/F
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
76 ABB Automation
Channel 1
E1 55 CH1 STATUS OPEN
E2 55 CH1 STATUS CLOSED
E3 55 CH1 STATUS UNDEF.
E4 55 CH1 STATUS UNDEF.
E5 59 CH1 OPEN ACTIVATED
E6 59 CH1 OPEN RESET
E7 61 CH1 CLOSE ACTIVATED
E8 61 CH1 CLOSE RESET
E9 63 CH1 ACTIV. INHIB.
E10 64 CH1 ACTIV. FAILED
E11 65 CH1 ACT. W.OUT SEL.
Channel 2
E1 66 CH2 STATUS OPEN
E2 66 CH2 STATUS CLOSED
E3 66 CH2 STATUS UNDEF.
E4 66 CH2 STATUS UNDEF.
E5 70 CH2 OPEN ACTIVATED
E6 70 CH2 OPEN RESET
E7 72 CH2 CLOSE ACTIVATED
E8 72 CH2 CLOSE RESET
E9 74 CH2 ACTIV. INHIB.
E10 75 CH2 ACTIV. FAILED
E11 76 CH2 ACT. W.OUT SEL.
Channel 3
E1 77 CH3 STATUS OPEN
E2 77 CH3 STATUS CLOSED
E3 77 CH3 STATUS UNDEF.
E4 77 CH3 STATUS UNDEF.
E5 81 CH3 OPEN ACTIVATED
E6 81 CH3 OPEN RESET
E7 83 CH3 CLOSE ACTIVATED
E8 83 CH3 CLOSE RESET
E9 85 CH3 ACTIV. INHIB.
E10 86 CH3 ACTIV. FAILED
E11 87 CH3 ACT. W.OUT SEL.
Channel 4
E1 88 CH4 STATUS OPEN
E2 88 CH4 STATUS CLOSED
E3 88 CH4 STATUS UNDEF.
E4 88 CH4 STATUS UNDEF.
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 77
E5 92 CH4 OPEN ACTIVATED
E6 92 CH4 OPEN RESET
E7 94 CH4 CLOSE ACTIVATED
E8 94 CH4 CLOSE RESET
E9 96 CH4 ACTIV. INHIB.
E10 97 CH4 ACTIV. FAILED
E11 98 CH4 ACT. W.OUT SEL.
Channel 5
E1 99 CH5 STATUS OPEN
E2 99 CH5 STATUS CLOSED
E3 99 CH5 STATUS UNDEF.
E4 99 CH5 STATUS UNDEF.
E5 103 CH5 OPEN ACTIVATED
E6 103 CH5 OPEN RESET
E7 105 CH5 CLOSE ACTIVATED
E8 105 CH5 CLOSE RESET
E9 107 CH5 ACTIV. INHIB.
E10 108 CH5 ACTIV. FAILED
E11 109 CH5 ACT. W.OUT SEL.
Channel 6
E1 110 CH6 STATUS OPEN
E2 110 CH6 STATUS CLOSED
E3 110 CH6 STATUS UNDEF.
E4 110 CH6 STATUS UNDEF.
E5 114 CH6 OPEN ACTIVATED
E6 114 CH6 OPEN RESET
E7 116 CH6 CLOSE ACTIVATED
E8 116 CH6 CLOSE RESET
E9 118 CH6 ACTIV. INHIB.
E10 119 CH6 ACTIV. FAILED
E11 120 CH6 ACT. W.OUT SEL.
Channel 7
E1 121 CH7 STATUS OPEN
E2 121 CH7 STATUS CLOSED
E3 121 CH7 STATUS UNDEF.
E4 121 CH7 STATUS UNDEF.
E5 125 CH7 OPEN ACTIVATED
E6 125 CH7 OPEN RESET
E7 127 CH7 CLOSE ACTIVATED
E8 127 CH7 CLOSE RESET
E9 129 CH7 ACTIV. INHIB.
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
78 ABB Automation
E10 130 CH7 ACTIV. FAILED
E11 131 CH7 ACT. W.OUT SEL.
Channel 8
E1 132 CH8 INPUT ACTIVATED
E2 132 CH8 INPUT RESET
E3 134 CH8 SIGNAL 5 OR 6 ACTIVATED
E4 134 CH8 SIGNAL 5 OR 6 RESET
Channel 9
E1 136 CH9 INPUT ACTIVATED
E2 136 CH9 INPUT RESET
E3 138 CH9 SIGNAL 5 OR 6 ACTIVATED
E4 138 CH9 SIGNAL 5 OR 6 RESET
Channel 10
E1 140 CH10 INPUT ACTIVATED
E2 140 CH10 INPUT RESET
E3 142 CH10 SIGNAL 5 OR 6 ACTIVATED
E4 142 CH10 SIGNAL 5 OR 6 RESET
Channel 11
E1 144 CH11 INPUT ACTIVATED
E2 144 CH11 INPUT RESET
E3 146 CH11 SIGNAL 5 OR 6 ACTIVATED
E4 146 CH11 SIGNAL 5 OR 6 RESET
Channel 12
E1 148 CH12 INPUT ACTIVATED
E2 148 CH12 INPUT RESET
E3 150 CH12 SIGNAL 5 OR 6 ACTIVATED
E4 150 CH12 SIGNAL 5 OR 6 RESET
Channel 13
E1 152 CH13 INPUT ACTIVATED
E2 152 CH13 INPUT RESET
E3 154 CH13 SIGNAL 5 OR 6 ACTIVATED
E4 154 CH13 SIGNAL 5 OR 6 RESET
Channel 14
E1 156 CH14 INPUT ACTIVATED
E2 156 CH14 INPUT RESET
E3 158 CH14 SIGNAL 5 OR 6 ACTIVATED
E4 158 CH14 SIGNAL 5 OR 6 RESET
Channel 15
E1 160 CH15 INPUT ACTIVATED
E2 160 CH15 INPUT RESET
E3 162 CH15 SIGNAL 5 OR 6 ACTIVATED
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 79
E4 162 CH15 SIGNAL 5 OR 6 RESET
Channel 16
E1 164 CH16 INPUT ACTIVATED
E2 164 CH16 INPUT RESET
E3 166 CH16 SIGNAL 5 OR 6 ACTIVATED
E4 166 CH16 SIGNAL 5 OR 6 RESET
Channel 17
E1 168 CH17 INPUT ACTIVATED
E2 168 CH17 INPUT RESET
E3 170 CH17 SIGNAL 5 OR 6 ACTIVATED
E4 170 CH17 SIGNAL 5 OR 6 RESET
4.3.47 SPTO12D4
E-code Index Object Text
E50 190 RESTARTING
E51 191 REG. OVERFLOW
E52 192 COMMUNICATION
E53 193 RESPONDS FAILED
E54 193 RESPONDS AGAIN
Channel 1
E1 63 CH1 STATUS CLOSED
E2 63 CH1 STATUS OPEN
E3 63 CH1 STATUS UNDEF.
E4 63 CH1 STATUS UNDEF.
Channel 2
E1 64 CH2 STATUS CLOSED
E2 64 CH2 STATUS OPEN
Channel 3
E1 65 CH3 STATUS CLOSED
E2 65 CH3 STATUS OPEN
E3 65 CH3 STATUS UNDEF.
E4 65 CH3 STATUS UNDEF.
Channel 4
E1 66 CH4 STATUS CLOSED
E2 66 CH4 STATUS OPEN
Channel 5
E1 67 CH5 STATUS CLOSED
E2 67 CH5 STATUS OPEN
E3 67 CH5 STATUS UNDEF.
E4 67 CH5 STATUS UNDEF.
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
80 ABB Automation
Channel 6
E1 68 CH6 STATUS CLOSED
E2 68 CH6 STATUS OPEN
Channel 7
E1 69 CH7 STATUS CLOSED
E2 69 CH7 STATUS OPEN
E3 69 CH7 STATUS UNDEF.
E4 69 CH7 STATUS UNDEF.
Channel 8
E1 70 CH8 STATUS CLOSED
E2 70 CH8 STATUS OPEN
Channel 9
E1 71 CH9 STATUS CLOSED
E2 71 CH9 STATUS OPEN
E3 71 CH9 STATUS UNDEF.
E4 71 CH9 STATUS UNDEF.
Channel 10
E1 72 CH10 STATUS CLOSED
E2 72 CH10 STATUS OPEN
Channel 11
E1 73 CH11 STATUS CLOSED
E2 73 CH11 STATUS OPEN
E3 73 CH11 STATUS UNDEF.
E4 73 CH11 STATUS UNDEF.
Channel 12
E1 74 CH12 STATUS CLOSED
E2 74 CH12 STATUS OPEN
Channel 13
E1 75 CH13 STATUS CLOSED
E2 75 CH13 STATUS OPEN
E3 75 CH13 STATUS UNDEF.
E4 75 CH13 STATUS UNDEF.
Channel 14
E1 76 CH14 STATUS CLOSED
E2 76 CH14 STATUS OPEN
Channel 15
E1 77 CH15 STATUS CLOSED
E2 77 CH15 STATUS OPEN
E3 77 CH15 STATUS UNDEF.
E4 77 CH15 STATUS UNDEF.
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 81
Channel 16
E1 78 CH16 STATUS CLOSED
E2 78 CH16 STATUS OPEN
4.3.48 REC 501
E-code Index Object Text
E1 11 INPUT I1
E2 11 INPUT I1
E3 12 INPUT I2
E4 12 INPUT I2
E5 13 INPUT I3
E6 13 INPUT I3
E7 14 INPUT I4
E8 14 INPUT I4
E10 15 INPUT I5
E11 15 INPUT I5
E12 16 BATTERY VOLTAGE ;LOW
E13 16 BATTERY VOLTAGE ;NORMAL
E14 17 POWER SUPPLY TEMP. ;HIGH
E15 17 POWER SUPPLY TEMP. ;NORMAL
E16 18 AUX. SUPPLY CONNECTION
E17 18 AUX. SUPPLY CONNECTION
E18 19 INTERMDT COUNTER 1 NEW VALUE
E19 20 INTERMDT COUNTER 2 NEW VALUE
E20 21 PERIOD COUNTER 1 NEW VALUE
E21 22 PERIOD COUNTER 2 NEW VALUE
E30 17 OUTPUT O1
E31 17 OUTPUT O1
E32 18 OUTPUT O2
E33 18 OUTPUT O2
E34 19 OUTPUT O3
E35 20 OUTPUT O3
E36 21 OUTPUT O4
E37 22 OUTPUT O4
Channel 1
E40 27 OBJECT 1 STATUS->10
E41 27 OBJECT 1 STATUS->01
E42 27 OBJECT 1 STATUS->11
E43 27 OBJECT 1 STATUS->00
E44 28 OBJECT 1,OPEN COMMAND
E45 29 OBJECT 1,CLOSE COMMAND
4 Application Engineering
Information in
LIB 510/MicroSCADA
SM/SPACOM
Configuration Manual
1MRS751393-MEN
82 ABB Automation
Channel 2
E40 30 OBJECT 2 STATUS->10
E41 30 OBJECT 2 STATUS->01
E42 30 OBJECT 2 STATUS->11
E43 30 OBJECT 2 STATUS->00
E44 31 OBJECT 2,OPEN COMMAND
E45 32 OBJECT 2,CLOSE COMMAND
E50 180 RESTARTING
E51 181 REG. OVERFLOW
E52 182 COMMUNICATION
E53 183 RESPONDS FAILED
E54 183 RESPONDS AGAIN
4.3.49 SPCF 1D15
E-code Index Object Text
E1 35 STAGE 1 ON
E2 35 STAGE 1 OFF
E3 36 STAGE 1 TIMER 1 TRIP ON
E4 36 STAGE 1 TIMER 1 TRIP OFF
E5 37 STAGE 1 TIMER 2 TRIP ON
E6 37 STAGE 1 TIMER 2 TRIP OFF
E7 38 STAGE 2 ON
E8 38 STAGE 2 OFF
E9 39 STAGE 2 TIMER 1 TRIP ON
E10 39 STAGE 2 TIMER 1 TRIP OFF
E11 40 STAGE 2 TIMER 2 TRIP ON
E12 40 STAGE 2 TIMER 2 TRIP OFF
E13 41 STAGE 3 ON
E14 41 STAGE 3 OFF
E15 42 STAGE 3 TIMER 1 TRIP ON
E16 42 STAGE 3 TIMER 1 TRIP OFF
E17 43 STAGE 3 TIMER 2 TRIP ON
E18 43 STAGE 3 TIMER 2 TRIP OFF
E19 44 STAGE 4 ON
E20 44 STAGE 4 OFF
E21 45 STAGE 4 TIMER 1 TRIP ON
E22 45 STAGE 4 TIMER 1 TRIP OFF
E23 46 STAGE 4 TIMER 2 TRIP ON
E24 46 STAGE 4 TIMER 2 TRIP OFF
E25 47 OUTPUT SS1 ON
E26 47 OUTPUT SS1 OFF
1MRS751393-MEN SM/SPACOM
Configuration Manual
4 Application Engineering
Information in
LIB 510/MicroSCADA
ABB Automation 83
E27 48 OUTPUT SS2 ON
E28 48 OUTPUT SS2 OFF
E29 49 OUTPUT SS3 ON
E30 49 OUTPUT SS3 OFF
E31 50 OUTPUT SS4 ON
E32 50 OUTPUT SS4 OFF
E33 51 OUTPUT TS1 ON
E34 51 OUTPUT TS1 OFF
E35 52 OUTPUT TS2 ON
E36 52 OUTPUT TS2 OFF
E37 53 OUTPUT TS3 ON
E38 53 OUTPUT TS3 OFF
E39 54 OUTPUT TS4 ON
E40 54 OUTPUT TS4 OFF
E41 55 RECOVERY FUNCTION ON
E42 55 RECOVERY FUNCTION OFF
E43 56 RECOV.FUNC INTRRPTD
E44 57 RECOV.FUNC OPERATING
E45 58 RECOV.FUNC RESET
E50 185 RESTARTING
E51 186 REG. OVERFLOW
E52 187 COMMUNICATION
E53 188 RESPONDS FAILED
E54 188 RESPONDS AGAIN
4.4 Format Pictures and Status Texts
Filename Value Status text
FORM4FRALI.PIC 0
1
2
3
4
5
Normal
Alarm
Remote
Local
Off
On
FORM4UMEV.PIC Unmapped event
1MRS751393-MEN SM/SPACOM
Configuration Manual
ABB Automation
Index
Page
$
attributes .............................................................................................................................. 15
Attributes folder................................................................................................................... 14
AUTHORIZATION GROUP.............................................................................................. 15
&
context object type................................................................................................................. 9
Currents (I, I0)" ................................................................................................................... 19
'
device object type.................................................................................................................. 9
+
home directory....................................................................................................................... 9
,
Ip ......................................................................................................................................... 19
Ir .......................................................................................................................................... 19
Is.......................................................................................................................................... 19
/
Language dependent text files ............................................................................................. 27
LIB_OBJECT_NAME........................................................................................................ 15
0
modules ............................................................................................................................... 23
1
node ....................................................................................................................................... 9
nominal values..................................................................................................................... 19
2
object identification attributes ............................................................................................. 15
object types............................................................................................................................ 9
3
preconfigured relays ............................................................................................................ 18
5
Rack and module configuration........................................................................................... 13
Residual voltage (U0)" ........................................................................................................ 20
root directory......................................................................................................................... 9
root node................................................................................................................................ 9
6
settings................................................................................................................................... 9
Storing picture function data ............................................................................................... 13
Storing relay specific data to the database........................................................................... 13
SM/SPACOM
Configuration Manual
1MRS751393-MEN
ABB Automation
7
Tools folder..........................................................................................................................14
8
U...........................................................................................................................................20
Up.........................................................................................................................................20
Ur .........................................................................................................................................20
Us .........................................................................................................................................20
9
VISIBLE..............................................................................................................................15
ABB Substation Automation Oy
P.O. Box 699
FIN-65101 VAASA
Finland
Tel. +358 10 224 000
Fax. +358 10 224 1094
www.abb.com/substationautomation
1
M
R
S
7
5
1
3
9
3
-
M
E
N