Scribd
Upload
214 views

Pir Sensor GH 718c Manual

The GH-718C motion sensor has an input voltage range of 4.5-20V DC, uses 50uA of current, and outputs a 0-3V signal when motion is detected within its 110 degree angle and up to 7 meters. The default setting does not allow for an override trigger.

Uploaded by

proctep
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
214 views

Pir Sensor GH 718c Manual

The GH-718C motion sensor has an input voltage range of 4.5-20V DC, uses 50uA of current, and outputs a 0-3V signal when motion is detected within its 110 degree angle and up to 7 meters. The default setting does not allow for an override trigger.

Uploaded by

proctep
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GH-718C Specifications

Input Voltage: DC 4.5-20V Static current: 50uA Output signal: 0 - 3V (Output high when motion detected) Sentry Angle: 110 degree Sentry Distance: max 7 m Shunt for setting override trigger: L - No (Default) Terminals: (+) : +4.5- 20VDC Power in OUT : TTL Compatible Digital Output (-) : GND

You might also like