Scribd
Upload
295 views

Maximum Allowable Short-Term Strain: DSM Engineering Plastics

The document provides guidelines for maximum allowable short-term strain in plastics materials for applications such as snap fits during assembly. It states that the maximum strain is 70% of the yield strain for materials with a clear yield point, or 50% of the strain at break for materials that break without yielding. Typical maximum strain values are provided for various DSM plastic materials like PA6, PA66, and their glass-filled variants at 23°C. For applications with repeated loading, 60% of the stated values are recommended.

Uploaded by

vkms
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
295 views

Maximum Allowable Short-Term Strain: DSM Engineering Plastics

The document provides guidelines for maximum allowable short-term strain in plastics materials for applications such as snap fits during assembly. It states that the maximum strain is 70% of the yield strain for materials with a clear yield point, or 50% of the strain at break for materials that break without yielding. Typical maximum strain values are provided for various DSM plastic materials like PA6, PA66, and their glass-filled variants at 23°C. For applications with repeated loading, 60% of the stated values are recommended.

Uploaded by

vkms
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 0

DSM Engineering Plastics Technical Guide

Maximum allowable short-term strain


The maximum allowable short-term strain in plastics must be known to calculate the maximum
permissible deformation, for instance of
- snap fits during assembly and disassembly,
- threads during stripping from the mould,
- parts with undercuts during ejection from the mold etc.

The maximum allowable short-term strain is:
70% of the yield strain for materials with a clear yield point*. 50% of the strain at break for materials that break
without yielding, as is the case for most glass filled materials.
The table below gives some typical values at a temperature of 23C. Because values are temperature dependent
and different temperatures can be encountered during the various manufacturing steps, real values at those
temperatures should be used.
The yield strain and the strain at break can be found in the DSM material database.


































All information supplied by or on behalf of DSM in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but DSM assumes no liability
and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a particular purpose or non-infringement or any warranty arising froma course of dealing, usage, or
trade practice whatsoever in respect of application, processing or use made of the aforementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and
other properties or any consequence fromthe use of all such information.
DSM Engineering Plastics Technical Guide

Typical values for the maximum allowable short-term strain at 23C
DSM Products Polymer description (%)
Dry / condioned
PA6 and PA66 2.5 / 10
(
*
)
PA6 and PA66 +15-35% GF 1.8 / 2.8
PA6 and PA66 +40-50% GF 1.5 / 2.0

Akulon
PA6 and PA6.6 +GF +IM 2.3 / 4.0
PA46 7.0 / 10
(
*
)
PA46 +FR 3.5 / 10
(
*
)

PA46 +IM 10 / 10
(
*
)

PA46 +15% GF 2.0 / 4.0
PA46 +15% GF +FR 1.5 / 3.0
PA46 +30% GF 2.0 / 3.5
PA46 +30% GF +FR 1.3 / 1.8
PA46 +40% GF 1.5 / 3.0
PA46 +40-45% GF +FR 1.0 / 1.5
PA46 +50% GF 1.4 / 2.5





Stanyl
PA46 +60% GF 1.0 / 1.5
PBT 2.5
(
*
)
PBT +FR 3.2
(
*
)

PBT +IM 2.8
(
*
)

PBT +15-30% GF 1.5
PBT +15-30% GF +FR 1.3
PBT +20% GF +IM 2.0
PBT +35% GF 1.3
PET 2.8
(
*
)

PET +20-35% GF 1.3
PET +30-33% GF 1.0










Semi-
crystalline
materials




Arnite
PET +50% GF 1.0
PC 4.2
PC +10% GF 3.5
PC +20% GF 2.0
PC +30% GF 1.0


Xantar
PC +40% GF 0.8
Xantar C PC +ABS 3.0


Amorphous
materials
Stapron E PC +PET 4.2
FR =flame retardant
GF =glass fibre
IM =impact modifier

For applications where repeated loading and unloading is experienced, 60% of the mentioned values is
recommended.
(*) Note, even higher strains, close to the yield strain, could be accepted for unfilled semi-crystalline thermoplastics
with a clear yield point. Although no breakage will occur, this can result into unacceptable plastic deformation.






All information supplied by or on behalf of DSM in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but DSM assumes no liability
and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a particular purpose or non-infringement or any warranty arising froma course of dealing, usage, or
trade practice whatsoever in respect of application, processing or use made of the aforementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and
other properties or any consequence fromthe use of all such information.

You might also like