502E

Precision Ball Screw

Models BIF, DIK, BNFN, DKN, BLW, BNF, DK, MDK, WHF, BLK/WGF and BNT

Point of Selection
Options

A15-8
A15-350

Model No.

A15-367

Precautions on Use

A15-372

Accessories for Lubrication

Mounting Procedure and Maintenance
Lead Angle Accuracy

A24-1
B15-104
A15-11

Accuracy of the Mounting Surface

A15-14

Axial Clearance

A15-19

Maximum Length of the Screw Shaft

A15-24

DN Value

A15-33

Support Unit

A15-314

Recommended Shapes of Shaft Ends

A15-322

Dimensions of Each Model with an Option Attached

A15-358

A15-174

502E

Precision Ball Screw

For THK Precision Ball Screws, a wide array of precision-ground screw shafts and ball screw nuts
are available as standard to meet diversified applications.

Structure and Features

[Combinations of Various shaft Diameters and Leads]
You can select the combination of a shaft diameter and a lead that meet the intended use from the
various nut types and the screw shaft leads. Those nut types include the return-pipe nuts, which
represent the most extensive variations among the series, the compact simple nuts and the largelead end-cap nuts.
[Standard-stock Types (with Unfinished Shaft Ends/Finished Shaft Ends) are Available]
The unfinished shaft end types, which are mass manufactured by cutting the standardized screw
shafts to the standard lengths, and those with finished shaft ends, for which the screw shaft ends
are machined to match the corresponding the support units, are available as the standard.
[Accuracy Standards Compliant with JIS (ISO)]
The accuracy of the Ball Screw is controlled in accordance with the JIS standards (JIS B1192-1997).
Precision Ball Screw
Rolled Ball Screw

Type

C0

C1

C2

C3

C5

C7

C8

Series symbol

Grade

Remarks
JIS series

0, 1, 3, 5

Cp

1, 3, 5

Ct

1, 3, 5, 7, 10

C10

For positioning
ISO compliant
For transport

[Options that Meet the Environment are Available]

Options are available consisting of a lubricator (QZ), which enables the maintenance interval to be
significantly extended, and a wiper ring (W), which improves the ability to remove foreign materials
in adverse environments.

A15-175

Ball Screw

Accuracy grades

502E

[Structure and Features of Offset Preload Type Simple-Nut Ball Screw]

The Simple-Nut Ball Screw is an offset preload type in which a phase is provided in the middle of a
single ball screw nut, and an axial clearance is set at a below-zero value (under a preload).
The Simple-Nut Ball Screw has a more compact structure and allows smoother motion than the conventional double-nut type (spacer inserted between two nuts).
[Comparison between the Simple Nut and the Double-Nuts]
Simple-Nut Ball Screw

Conventional Double-Nut Type Ball Screw

Ball screw nut Ball screw nut

Spacer

Ball screw nut

Preloading Structure

Applied preload

Applied preload

Applied preload

Applied preload

Pitch (Pitch + preload) Pitch

Pitch (4 to 5 pitches + preload) Pitch

Ball screw nut

Ball screw nut Spacer Ball screw nut

Pitch Pitch Pitch

Pitch Pitch Pitch Pitch Pitch

Screw shaft

Screw shaft

A15-176

502E

Precision Ball Screw

Simple-Nut Ball Screw

Conventional Double-Nut Type Ball Screw

Rotational Performance

The preload adjustment with Simple Nut Ball

Screw is performed according to the ball diameter.
This eliminates the inconsistency in the contact angle,
which is the most important factor of the Ball Screw
performance. It also ensures the high rigidity, the
smooth motion and the high wobbling accuracy.

The use of a spacer in the double-nuts tends to cause

inconsistency in the contact angle due to inaccurate
flatness of the spacer surface and an inaccurate perpendicularity of the nut. This results in a non-uniform
ball contact, an inferior rotational performance and a
low wobbling accuracy.

Dimensions

Ball Screw

Since Simple-Nut Ball Screw is based on apreloading

mechanism that does not require a spacer, the overall
nut length can be kept short. As a result, the whole nut
can be lightly and compactly designed.
69
53

20

63

Simple-Nut

63

20

Double-Nut

A15-177

502E

[Comparison between the Offset Preload Type of Simple-Nut Ball Screw and the Oversized-ball Preload Nut Ball Screw]
Conventional Oversized-ball Preload
Nut Ball Screw Model BNF

Simple-Nut Ball Screw Model DIK

Ball screw nut

Ball screw nut

Preloading Structure
Preload

Preload
Pitch Pitch Pitch

Pitch Pitch + preload Pitch

Ball screw nut

Ball screw nut

Pitch Pitch Pitch

Pitch Pitch Pitch

Screw shaft

Screw shaft

Accuracy Life
Simple-Nut Ball Screw model DIK has a similar
preloading structure to that of the double-nut type
although the former only has one ball screw shaft.
As a result, no differential slip or spin occurs, thus to
minimize the increase in the rotational torque and the
generation of heat. Accordingly, a high level of accuracy can be maintained over a long period.

With the oversized-ball preload nut Ball Screw, a preload is provided through the balls each in contact with
the raceway at four points. This causes differential
slip and spin to increase the rotational torque, resulting in an accelerated wear and a heat generation.
Therefore, the accuracy deteriorates in a short period.
4 point contact structure

2 point contact structure

d2
d1

Ball
rotational axis
Differential slip
B
d1 A
d2

d2 d1

th

A15-178

d2

th

B
A

d1

id

id

ct

ct

ta

ta

on

on

C
B

Ball
rotational axis

Differential slip
B
A

B
d1
d2

A
d2

502E

Precision Ball Screw

Types and Features
[Preload Type]

Model BIF

Specification TableA15-182

The right and the left screws are provided with

a phase in the middle of the ball screw nut, and
an axial clearance is set at a below-zero value
(under a preload). This compact model is capable of a smooth motion.

Model DIK

Specification TableA15-182

The right and the left screws are provided with

a phase in the middle of the ball screw nut, and
an axial clearance is set at a below-zero value
(under a preload). This compact model is capable of a smooth motion.

Specification TableA15-182

The most common type with a preload provided

via a spacer between the two combined ball
screw nuts to eliminate the backlash. It can
be mounted using the bolt holes drilled on the
flange.

Model DKN

Specification TableA15-202

A preload is provided via a spacer between

the two combined ball screw nuts to achieve a
below-zero axial clearance (under a preload).

A15-179

Ball Screw

Model BNFN

502E

Model BLW

Specification TableA15-182

Since a preload is provided through a spacer

between two large lead nuts, high-speed feed
without by backlash is ensured.

[No Preload Type]

Model BNF

Specification TableA15-218

The simplest type with a single ball screw nut. It

is designed to be mounted using the bolt holes
drilled on the flange.

Model DK

Specification TableA15-216

The most compact type, with a ball screw nut

diameter 70 to 80% of that of the return-pipe
nut.

Model MDK
A miniature type with a screw shaft diameter of
4 to 14 mm and a lead of 1 to 5mm.

A15-180

Specification TableA15-216

502E

Precision Ball Screw

Model WHF

Specification TableA15-216

This Ball Screw for high-speed feed achieves a

DN value of 120,000 by using a new circulation
structure.
Since the nut outer diameter and the mounting holes of this model are dimensionally interchangeable with the previous model WGF,
model WGF can be replaced with this model.
(WHF1530, WHF2040 and WHF2550)

Models BLK/WGF

Specification TableA15-216

With model BLK, the shaft diameter is equal

to the lead dimension. Model WGF has a lead
dimension 1.5 to 3 times longer than the shaft
diameter.

Specification TableA15-246

Since mounting screw holes are machined on

the square ball screw nut, this model can compactly be mounted on the machine without a
housing.

A15-181

Ball Screw

Square Ball Screw Nut Model BNT

502E

Preload Type of Precision

Ball Screw

D1 dp

4 to 16

dc d

Dg6

A
(Greasing hole)

60

Lead

d1

d2

PCD

14 to 18

L1
B1

H
h

Tw

Screw shaft
outer diameter

B2
DIK (1404 to 2510)

4- d1

30

L1

30

D1 dp

PCD

A
(Greasing hole)

Tw

Screw Lead
shaft
outer
diameter
d

Ph

14

15

10
4

5
16
6
10
16
18

Model No.

10

DIK
DIK
BLW
BIF
BIF
DIK
BNFN
BNFN
BIF
BIF
BLW
BIF
BNFN
BNFN

B1

1404-4
1404-6
1510-5.6
1604-6
1605-5
1605-6
1605-3
1605-5
1606-5
1610-3
1616-3.6
1810-3
1810-2.5
1810-3

B2

B3

Dg6

D2

dc d

N1
BLW

Ball
Thread No. of Basic load rating Rigidity
center- minor loaded
Outer Flange
to-center diameter circuits
K
Ca
C 0a
diameter diameter
diameter
dp
14.5
14.5
15.75
16.5
16.75
16.75
16.75
16.75
16.8
16.8
16.65
18.8
18.8
18.8

dc
11.8
11.8
12.5
13.8
13.2
13.2
13.2
13.2
13.2
13.2
13.7
15.5
15.5
15.5

Rows turns
21
31
22.8
21.5
12.5
31
21.5
22.5
12.5
11.5
21.8
11.5
12.5
21.5

kN
3
4.2
14.3
5.1
7.4
7.4
8.7
13.5
7.5
4.8
7.1
5.1
7.8
9.2

kN
5.1
7.7
27.8
10.5
13.9
13
16.8
27.8
14
8.5
14.3
9.6
15.9
19.1

N/m
190
280
680
350
330
310
390
640
330
210
440
230
360
430

D
26
26
43
36
40
30
40
40
40
40
41
42
42
42

D1
45
45
64
59
60
49
60
60
60
63
60
65
65
65

D2

34

32

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.
Model BLW cannot be attached with seal.

A15-182

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1
B1

H
h

PCD

d1

d2

dc d Dg6

D1 dp

60
A
(Greasing hole)

BIF

PCD
h

L1
B1

H
d1

d2

60 D1 dp

A
(Greasing hole)

dc d Dg6

BNFN
Unit: mm

Nut dimensions
Overall
length
L1
48
60
89
65
56
60
96
106
62
62
84.5
75
119
135

Greasing
hole
H
10
10
10
11
10
10
10
10
10
11
10
12
12
12

B1
38
50
69
54
46
50
86
96
52
51
65.5
63
107
123

B2
10
10
18.7

10
75
85

18.1

94
110

B3 PCD

35

35
28.6 52

47

50

39

50

50

50

51
27.1 49

53

53

53

d1
4.5
4.5
5.5
5.5
4.5
4.5
4.5
4.5
4.5
5.5
4.5
5.5
5.5
5.5

d2
8
8

9.5
8
8
8
8
8
9.5

9.5
9.5
9.5

h
4.5
4.5

5.5
4.5
4.5
4.5
4.5
4.5
5.5

5.5
5.5
5.5

Tw
29
29
46

31

44

N1

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

kgcm2/mm
2.9610-4
2.9610-4
3.910-4
5.0510-4
5.0510-4
5.0510-4
5.0510-4
5.0510-4
5.0510-4
5.0510-4
5.0510-4
8.0910-4
8.0910-4
8.0910-4

kg
0.2
0.23
0.81
0.48
0.56
0.3
0.81
0.88
0.56
0.57
0.67
0.75
1.09
1.21

kg/m
1.0
1.0
1.07
1.35
1.25
1.25
1.25
1.25
1.25
1.41
1.42
1.81
1.81
1.81

For model number coding, see A15-248.

OptionsA15-349

A15-183

Ball Screw

B2

502E

Preload Type of Precision

Ball Screw

20

Lead

4 to 5

L1
B1

H
h

Tw

Screw shaft
outer diameter

d1

d2
D1 dp

PCD

A
(Greasing hole)

60

dc d

Dg6

B2

DIK (1404 to 2510)

Screw
shaft
outer
diameter
d

Lead
Model No.
Ph
BIF
4

20
5

2004-5

Ball
centerto-center
diameter
dp
20.5

Thread
minor
diameter

No. of
loaded
circuits

dc
17.8

Rows turns
12.5

Basic load rating

Rigidity

Ca

C 0a

kN
4.8

kN
10.9

N/m
360
700

BIF

2004-10

20.5

17.8

22.5

8.6

21.8

DIK

2004-6

20.5

17.8

31

5.2

11.6

380

DIK

2004-8

20.5

17.8

41

6.6

15.5

510

BIF

2005-5

20.75

17.2

12.5

8.3

17.4

390

BIF

2005-6

20.75

17.2

21.5

9.7

21

470

BIF

2005-7

20.75

17.2

13.5

11.1

24.5

550

BIF

2005-10

20.75

17.2

22.5

15.1

35

760

DIK

2005-6

20.75

17.2

31

8.5

17.3

310

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.

A15-184

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

PCD

d1

d2

60

L1
B1

dc d Dg6

D1 dp

A
(Greasing hole)

BIF

Ball Screw
Unit: mm

Nut dimensions
Greasing
hole

Outer Flange Overall

diameter diameter length

Screw shaft
inertia
moment/mm

Nut
mass

Shaft
mass

Tw

A
M6

kgcm2/mm
1.2310-3

kg
0.49

kg/m
2.18

5.59.55.5

M6

1.2310-3

0.61

2.18

44

5.59.55.5

35

M6

1.2310-3

0.34

2.18

15

44

5.59.55.5

35

M6

1.2310-3

0.37

2.18

45

55

5.59.55.5

M6

1.2310-3

0.57

2.06

11

66

74

55

5.59.55.5

M6

1.2310-3

0.79

2.06

65

11

54

62

55

5.59.55.5

M6

1.2310-3

0.69

2.06

67

86

11

75

83

55

5.59.55.5

M6

1.2310-3

0.85

2.06

58

61

11

50

10

46

5.59.55.5

36

M6

1.2310-3

0.38

2.06

PCD
d1d2h
51 5.59.55.5

D
40

D1
63

L1
53

H
11

B1
42

B2

40

63

76

11

65

51

32

56

62

11

51

15

32

56

70

11

59

44

67

56

11

44

67

77

44

67

44
34

For model number coding, see A15-248.

OptionsA15-349

A15-185

502E

Preload Type of Precision

Ball Screw

D1 dp

6 to 20

dc d

Dg6

A
(Greasing hole)

60

Lead

d1

d2

PCD

20

L1
B1

H
h

Tw

Screw shaft
outer diameter

B2

DIK (1404 to 2510)

4- d1

30

L1

30

D1 dp

PCD

Tw

Screw Lead
shaft
outer
diameter
d
Ph

20
8

B1

A
(Greasing hole)

Model No.

B2

B3

Dg6

D2

dc d

N1
BLW

Ball
Thread No. of Basic load rating Rigidity
center- minor loaded
Outer
Flange
to-center diameter circuits
K
Ca
C 0a
diameter diameter
diameter
dp
dc Rows turns kN
kN
N/m
D
D1
20.75
17.2 11.5
5.4
10.5
250
48
71

D2

BIF

2006-3

BIF

2006-5

20.75

17.2

12.5

8.3

17.5

390

48

71

DIK

2006-6

21

16.4

31

11.4

21.5

410

35

58

BNFN 2006-3

20.75

17.2

21.5

9.7

21

470

48

71

BNFN 2006-3.5

20.75

17.2

13.5

11.1

24.5

550

48

71

BNFN 2006-5

20.75

17.2

22.5

15.1

35

760

48

71

21

16.4

12.5

11.1

21.8

760

46

74

BIF

2008-5

DIK

2008-4

21

16.4

21

8.1

14.4

280

35

58

10

BIF

2010A-3

21

16.4

11.5

7.2

13.2

250

46

74

12

BIF

2012-3

20

BLW

2020-3.6

21

16.4

11.5

7.1

12.5

250

48

71

20.75

17.5

21.8

11.1

24.7

570

48

69

39

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.
Model BLW cannot be attached with seal.

A15-186

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

PCD

d1

d2

60

L1
B1

dc d Dg6

D1 dp

A
(Greasing hole)

BIF

PCD
h

L1
B1

H
d1

d2

60 D1 dp

A
(Greasing hole)

dc d Dg6

Ball Screw

B2
BNFN
Unit: mm

Nut dimensions
Overall
length

Greasing
hole

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

kg
0.74

kg/m
2.13

L1
56

H
11

B1
45

B2

B3

PCD
59

d1
5.5

d2
9.5

h
5.5

Tw

N1

A
M6

kgcm2/mm
1.2310-3

62

11

51

59

5.5

9.5

5.5

M6

1.2310-3

0.8

2.13

76

11

65

15

46

5.5

9.5

5.5

36

M6

1.2310-3

0.48

1.93

110

11

99

59

5.5

9.5

5.5

M6

1.2310-3

1.3

2.13

98

11

87

59

5.5

9.5

5.5

M6

1.2310-3

1.17

2.13

122

11

111

59

5.5

9.5

5.5

M6

1.2310-3

1.42

2.13

84

15

69

59

5.5

9.5

5.5

M6

1.2310-3

1.02

2.06

69

11

58

15

46

5.5

9.5

5.5

36

M6

1.2310-3

0.45

2.06

78

15

63

67

59

5.5

9.5

5.5

M6

1.2310-3

0.94

2.14

88

18

70

59

5.5

9.5

5.5

M6

1.2310-3

1.15

2.19

105

10

84

25

36

57

5.5

50

M6

1.2310-3

0.54

2.25

For model number coding, see A15-248.

OptionsA15-349

A15-187

502E

Preload Type of Precision

Ball Screw

D1 dp

4 to 6

dc d

Dg6

A
(Greasing hole)

60

Lead

d1

d2

PCD

25

L1
B1

H
h

Tw

Screw shaft
outer diameter

B2

DIK (1404 to 2510)

Screw
shaft
outer
diameter
d

Lead

DIK

2504-6

Ball
centerto-center
diameter
dp
25.5

Model No.
Ph

25
5

Thread
minor
diameter

No. of
loaded
circuits

dc
22.8

Basic load rating

Rigidity

Ca

C0a

Rows turns
31

kN
5.7

kN
15

N/m
470
620

DIK

2504-8

25.5

22.8

41

7.4

19.9

BIF

2504-5

25.5

22.8

12.5

5.2

13.7

420

BIF

2504-10

25.5

22.8

22.5

9.5

27.3

820

DIK

2505-6

25.75

22.2

31

9.7

22.6

490

BIF

2505-3

25.75

22.2

11.5

13.1

280

BIF

2505-5

25.75

22.2

12.5

9.2

22

470

BIF

2505-6

25.75

22.2

21.5

10.8

26.4

560

BIF

2505-7

25.75

22.2

13.5

12.3

30.7

650

BIF

2505-10

25.75

22.2

22.5

16.7

44

910

DIK

2506-4

26

21.4

21

9.1

18

330

DIK

2506-6

26

21.4

31

12.8

27

490

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.

A15-188

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

PCD

d1

d2

60

L1
B1

dc d Dg6

D1 dp

A
(Greasing hole)

BIF

Ball Screw
Unit: mm

Nut dimensions
Outer
Flange Overall
diameter diameter length

Greasing
hole

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

D
38

D1
63

L1
63

H
11

B1
52

B2 PCD
d1d2h
15 51 5.59.55.5

Tw
39

A
M6

kgcm2/mm
3.0110-3

kg
0.43

kg/m
3.5

38

63

71

11

60

15

51

5.59.55.5

39

M6

3.0110-3

0.47

3.5

46

69

48

11

37

57

5.59.55.5

M6

3.0110-3

0.55

3.5

46

69

72

11

61

57

5.59.55.5

M6

3.0110-3

0.74

3.5

40

63

61

11

50

10

51

5.59.55.5

41

M6

3.0110-3

0.47

3.35

50

73

52

11

41

61

5.59.55.5

M6

3.0110-3

0.7

3.35

50

73

55

11

44

61

5.59.55.5

M6

3.0110-3

0.75

3.35

50

73

77

11

66

79

61

5.59.55.5

M6

3.0110-3

0.95

3.35

50

73

65

11

54

62

61

5.59.55.5

M6

3.0110-3

0.83

3.35

50

73

85

11

74

82

61

5.59.55.5

M6

3.0110-3

1.02

3.35

40

63

60

11

49

10

51

5.59.55.5

41

M6

3.0110-3

0.46

3.19

40

63

72

11

61

15

51

5.59.55.5

41

M6

3.0110-3

0.54

3.19

For model number coding, see A15-248.

OptionsA15-349

A15-189

502E

Preload Type of Precision

Ball Screw

D1 dp

6 to 25

dc d

Dg6

A
(Greasing hole)

60

Lead

d1

d2

PCD

25

L1
B1

H
h

Tw

Screw shaft
outer diameter

B2

DIK (1404 to 2510)

4- d1

30

Tw

Screw Lead
shaft
outer
diameter
d
Ph
6

10
12
16
25

B1

D1 dp

PCD

25

L1

30

A
(Greasing hole)

B2

B3

Dg6

D2

dc d

N1
BLW

Ball
Thread No. of Basic load rating Rigidity
center- minor loaded
Outer Flange
to-center diameter circuits
Model No.
K
Ca
C0a
diameter diameter
diameter
dp
dc
Rows turns kN
kN
N/m
D
D1
BIF 2506-5
26
21.4 12.5 12.5
27.3
490
53
76
BIF 2506-6
26
21.4 21.5 14.6
32.8
580
53
76
BIF 2506-7
26
21.4 13.5 15.1
35.9
670
53
76
BIF 2506-10
26
21.4 22.5 22.5
54.8
940
53
76
DIK 2508-4
26
21.4
21
9.2
18.8
340
40
63
DIK 2508-6
26
21.4
31
13.1
28.1
500
40
63
BIF 2508-5
26.25
20.5 12.5 15.8
32.8
500
58
85
BIF 2508-6
26.25
20.5 21.5 18.5
39.4
600
58
85
BIF 2508-7
26.25
20.5 13.5 21.2
46
690
58
85
BIF 2508-10
26.25
20.5 22.5 28.7
65.8
970
58
85
DIK 2510-4
26
21.6
21
9
18
330
40
63
BIF 2510A-5
26.3
21.4 12.5 15.8
33
500
58
85
BIF 2512-5
26
21.9 12.5 12.3
27.6
490
53
76
BIF 2516-3
26
21.4 11.5
7.9
16.7
300
53
76
26
21.9 21.8 16.6
38.7
700
57
82
BLW 2525-3.6

D2

47

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358. Model BLW cannot be
attached with seal.

A15-190

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1
B1

H
h

PCD

d1

d2

60

dc d Dg6

D1 dp

A
(Greasing hole)

BIF

Ball Screw
Unit: mm

Nut dimensions
Overall
length
L1
62
86
74
98
71
94
82
111
98
130
85
100
96
92
124.5

Greasing
hole
H
11
11
11
11
12
12
15
15
15
15
15
18
11
11
12

B1
51
75
63
87
59
82
67
96
83
115
70
82
85
81
101.5

B2

15
25

20

33

B3

44

PCD
64
64
64
64
51
51
71
71
71
71
51
71
64
64
68

d1
5.5
5.5
5.5
5.5
5.5
5.5
6.6
6.6
6.6
6.6
5.5
6.6
5.5
5.5
6.6

d2
9.5
9.5
9.5
9.5
9.5
9.5
11
11
11
11
9.5
11
9.5
9.5

h
5.5
5.5
5.5
5.5
5.5
5.5
6.5
6.5
6.5
6.5
5.5
6.5
5.5
5.5

Tw

41
41

41

60

N1

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

kgcm2/mm
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3

kg
0.91
1.19
1.06
1.33
0.54
0.68
1.52
1.92
1.74
2.2
0.65
1.86
1.31
1.25
0.94

kg/m
3.19
3.19
3.19
3.19
3.35
3.35
3.13
3.13
3.13
3.13
3.45
3.27
3.52
3.6
3.52

For model number coding, see A15-248.

OptionsA15-349

A15-191

502E

Preload Type of Precision

Ball Screw

Tw
A
(Greasing hole)

22.5

Screw shaft
outer diameter

28

Lead

5 to 10

L1
B1

H
h

d1

d2

Dg6

dc d

D1 dp

PCD

90

B2
DIK (2805 to 6312)

Screw
shaft outer
diameter

Lead

Ph

Model No.

28

10

BIF
BIF
BIF
BIF
DIK
DIK
BNFN
BIF
BIF
BIF
DIK
BNFN
BIF
BIF
BIF
BIF
DIK
BNFN

2805-5
2805-6
2805-7
2805-10
2805-6
2805-8
2805-7.5
2806-5
2806-7
2806-10
2806-6
2806-7.5
2808-5
2808-6
2808-10
2810-3
2810-4
2810-2.5

Ball
centerto-center
diameter
dp
28.75
28.75
28.75
28.75
28.75
28.75
28.75
28.75
28.75
28.75
29
28.75
29.25
29.25
29.25
29.75
29.25
29.75

Thread
minor
diameter

No. of
loaded
circuits

dc
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
24.4
25.2
23.6
23.6
23.6
22.4
23.6
22.4

Rows turns
12.5
21.5
13.5
22.5
31
41
32.5
12.5
13.5
22.5
31
32.5
12.5
21.5
22.5
11.5
21
12.5

Basic load rating

Rigidity

Ca

C0a

kN
9.7
11.3
12.9
17.4
10.5
13.4
24.8
9.6
12.9
17.5
14
24.8
16.8
19.6
30.4
15.7
12.3
24

kN
24.6
29.5
34.4
49.4
26.4
35.2
73.8
24.6
34.5
49.4
32
73.8
36.8
44.2
73.7
29.4
25
48.2

N/m
520
620
720
1000
560
730
1470
520
710
1000
530
1470
550
660
1060
350
380
560

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.

A15-192

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1
B1

H
h

PCD

d1

d2

60

dc d Dg6

D1 dp

A
(Greasing hole)

BIF
PCD
h

L1
B1

H
d1

d2

60 D1 dp

A
(Greasing hole)

dc d Dg6

B2
BNFN

Greasing
hole

Outer Flange Overall

diameter diameter length
D
55
55
55
55
43
43
55
55
55
55
43
55
60
60
60
65
45
65

D1
85
85
85
85
71
71
85
85
85
85
71
85
104
104
104
106
71
106

L1
59
79
69
89
69
79
134
68
80
104
73
158
92
120
140
88
84
146

H
12
12
12
12
12
12
12
12
12
12
12
12
18
18
18
18
15
18

B1
47
67
57
77
57
67
122
56
68
92
61
146
74
102
122
70
69
128

B2

69
59

15
20
109

73

15
133

20

PCD
69
69
69
69
57
57
69
69
69
69
57
69
82
82
82
85
57
85

d1d2h
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
1117.511
1117.511
1117.511
1117.511
6.6116.5
1117.511

Tw

55
55

55

55

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

kgcm2/mm
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3

kg
0.98
1.27
1.14
1.34
0.61
0.68
1.88
1.09
1.27
1.52
0.64
2.16
2.11
2.45
2.74
2.33
0.82
3.41

kg/m
4.27
4.27
4.27
4.27
4.27
4.27
4.27
4.36
4.36
4.36
4.36
4.36
4.02
4.02
4.02
3.66
4.18
3.66

For model number coding, see A15-248.

OptionsA15-349

A15-193

Ball Screw

Unit: mm

Nut dimensions

502E

Preload Type of Precision

Ball Screw

Tw
A
(Greasing hole)

22.5

Screw shaft
outer diameter

32

Lead

4 to 6

L1
B1

H
h

d1

d2

Dg6

dc d

D1 dp

PCD

90

B2
DIK (2805 to 6312)

Screw
shaft outer
diameter

Lead

Ph

Model No.

5
32

BIF
DIK
DIK
DIK
DIK
DIK
BIF
BIF
BIF
BIF
BNFN
DIK
DIK
BIF
BIF
BIF
BIF

3204-10
3204-6
3204-8
3204-10
3205-6
3205-8
3205-5
3205-6
3205-9
3205-10
3205-7.5
3206-6
3206-8
3206-5
3206-6
3206-7
3206-10

Ball
centerto-center
diameter
dp
32.5
32.5
32.5
32.5
32.75
32.75
32.75
32.75
32.75
32.75
32.75
33
33
33
33
33
33

Thread
minor
diameter

No. of
loaded
circuits

dc
30.1
30.1
30.1
30.1
29.2
29.2
29.2
29.2
29.2
29.2
29.2
28.4
28.4
28.4
28.4
28.4
28.4

Rows turns
22.5
31
41
51
31
41
12.5
21.5
31.5
22.5
32.5
31
41
12.5
21.5
13.5
22.5

Basic load rating

Rigidity

Ca

C0a

kN
10.5
6.4
8.2
10
11.1
14.2
10.2
12
17
18.5
26.3
14.9
19.1
13.9
16.3
18.5
25.2

kN
35.4
19.6
26.1
32.7
30.2
40.3
28.1
33.8
50.7
56.4
84.5
37.1
49.5
35.2
42.2
49.2
70.4

N/m
1010
580
760
940
620
810
570
690
1000
1110
1640
630
820
600
710
810
1150

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.

A15-194

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

PCD

d1

d2

60

L1
B1

dc d Dg6

D1 dp

A
(Greasing hole)

BIF
PCD
h

L1
B1

H
d1

d2

60 D1 dp

A
(Greasing hole)

dc d Dg6

B2
BNFN

Greasing
hole

Outer Flange Overall

diameter diameter length
D
54
45
45
45
46
46
58
58
58
58
58
48
48
62
62
62
62

D1
81
76
76
76
76
76
85
85
85
85
85
76
76
89
89
89
89

L1
76
64
72
80
62
73
56
78
98
86
136
73
87
63
87
75
99

H
11
11
11
11
12
12
12
12
12
12
12
12
12
12
12
12
12

B1
65
53
61
69
50
61
44
66
86
74
124
61
75
51
75
63
87

B2

15
15
20
10
15

78
98

111
15
20

86

PCD
67
63
63
63
63
63
71
71
71
71
71
63
63
75
75
75
75

d1d2h
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5
6.6116.5

Tw

59
59
59
59
59

59
59

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

kgcm2/mm
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3

kg
0.97
0.57
0.62
0.66
0.60
0.67
0.94
1.21
1.46
1.31
1.93
0.74
0.85
1.21
1.57
1.39
1.75

kg/m
5.86
5.86
5.86
5.86
5.67
5.67
5.67
5.67
5.67
5.67
5.67
6.31
6.31
6.31
6.31
6.31
6.31

For model number coding, see A15-248.

OptionsA15-349

A15-195

Ball Screw

Unit: mm

Nut dimensions

502E

Preload Type of Precision

Ball Screw
Tw
22.5

A
(Greasing hole)

Screw shaft
outer diameter

32

Lead

8 to 32

L1
B1

H
h

d1

d2

Dg6

dc d

D1 dp

PCD

B2

90

4- d1

30

32
10

12
32

B1

D1 dp

Tw

L1

30

PCD

Screw Lead
shaft
outer
diameter
d
Ph

DIK (2805 to 6312)

A
(Greasing hole)

B2

B3

Dg6

D2

dc d

N1
BLW

Ball
Thread No. of Basic load rating Rigidity
center- minor loaded
Outer
Flange
to-center diameter circuits
Model No.
Ca
C0a
K
diameter diameter
diameter
Rows turns kN
kN
N/m
D
D1
dp
dc
BIF 3208A-5
33.25
27.5 12.5 17.8
42.2
610
66
100
BIF 3208A-6
33.25
27.5 21.5 20.9
50.7
730
66
100
BIF 3208A-7
33.25
27.5 13.5 23.8
59.1
840
66
100
BIF 3208A-9
33.25
27.5 31.5 29.5
76
1070
66
100
BIF 3208A-10 33.25
66
100
27.5 22.5 32.3
84.4
1180
DIK 3210-6
33.75
26.4
31
25.7
52.2
600
54
87
BIF 3210A-5
33.75
26.4 12.5 26.1
56.2
640
74
108
BIF 3210A-6
33.75
26.4 21.5 30.5
67.4
750
74
108
BIF 3210A-7
33.75
26.4 13.5 34.8
78.6
870
74
108
BIF 3210A-10 33.75
74
108
26.4 22.5 47.2
112.7 1230
DIK 3212-4
33.75
26.4
21
18.8
37
430
54
87
BIF 3212-7
34
26.1 13.5 40.4
88.5
890
76
121
BLW 3232-3.6 33.25
28.3 21.8 23.7
59.5
880
68
99

D2

58

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.
Model BLW cannot be attached with seal.

A15-196

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1
B1

H
h

PCD

d1

d2

60

dc d Dg6

D1 dp

A
(Greasing hole)

BIF

Ball Screw
Unit: mm

Nut dimensions
Overall
length
L1
82
111
98
143
130
110
100
137
120
160
98
146
155

Greasing
hole
H
15
15
15
15
15
15
15
15
15
15
15
18
15

B1
67
96
83
128
115
95
85
122
105
145
83
128
127

B2

25

136
119
159
25

42.4

B3 PCD

82

82

82

82

82

69

90

90

90

90

69

98
55.4 81

d1
9
9
9
9
9
9
9
9
9
9
9
11
9

d2
14
14
14
14
14
14
14
14
14
14
14
17.5

h
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
11

Tw

66

66

70

N1

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

kgcm2/mm
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3

kg
1.93
2.42
2.21
2.99
2.77
1.57
2.92
3.73
3.35
4.27
1.43
4.5
3.19

kg/m
5.39
5.39
5.39
5.39
5.39
4.98
4.98
4.98
4.98
4.98
5.2
4.9
5.83

For model number coding, see A15-248.

OptionsA15-349

A15-197

502E

Preload Type of Precision

Ball Screw

Screw shaft
outer diameter

36

Lead

6 to 36

Tw
A
(Greasing hole)

22.5

L1
B1

H
h

d1

d2

Dg6

B2

90

4- d1

30

DIK (2805 to 6312)

10

12
16
20
36

Model No.

BIF
BIF
BIF
BNFN
BIF
BIF
BNFN
DIK
DIK
DIK
BIF
BIF
BNFN
BIF
BIF
BIF
BNFN
BIF
BLW

3606-5
3606-6
3606-10
3606-7.5
3608-5
3608-10
3608-7.5
3610-6
3610-8
3610-10
3610-5
3610-10
3610-7.5
3612-5
3612-10
3616-5
3616-5
3620-3
3636-3.6

B1

D1 dp

Tw
Screw Lead
shaft
outer
diameter
d
Ph

L1

30

PCD

36

dc d

D1 dp

PCD

A
(Greasing hole)

B2

B3

Dg6

D2

dc d

N1
BLW

Ball
Thread No. of Basic load rating
center- minor loaded
to-center diameter circuits
Ca
C0a
diameter
Rows turns kN
kN
dp
dc
36.75
33.2 12.5 10.7
31.8
36.75
33.2 21.5 12.5
38
36.75
33.2 22.5 19.4
63.4
36.75
33.2 32.5 27.5
95.2
37.25
31.6 12.5 18.8
47.5
37.25
31.6 22.5 34.1
95.1
37.25
31.6 32.5 48.3
142.1
37.75
30.5
31
28.8
63.8
37.75
30.5
41
36.8
85
37.75
30.5
51
44.6
106.3
37.75
30.5 12.5 27.6
63.3
37.75
30.5 22.5 50.1
126.4
37.75
30.5 32.5 71.1
190.1
38
30.1 12.5 32.1
71.4
38
30.1 22.5 58.4
142.1
38
30.1 12.5 32.1
71.4
38
30.1 22.5 58.3
143.1
37.75
30.5 11.5 17.6
38.3
37.4
31.7 21.8 30.8
78

Rigidity
K
N/m
630
740
1220
1790
670
1290
1910
710
940
1160
700
1350
1990
720
1370
720
1380
430
980

Outer
Flange
diameter diameter
D
65
65
65
65
70
70
70
58
58
58
75
75
75
78
78
78
78
70
79

D1
100
100
100
100
114
114
114
98
98
98
120
120
120
123
123
123
123
103
116

D2

66

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358. Model BLW cannot be attached with seal.

A15-198

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1
B1

H
h

PCD

d1

d2

60

dc d Dg6

D1 dp

A
(Greasing hole)

BIF
PCD
h

L1
B1

H
d1

d2

60 D1 dp

A
(Greasing hole)

dc d Dg6

B2

Unit: mm

Nut dimensions
Overall
length
L1
71
92
107
161
92
140
212
122
143
164
111
171
261
123
195
140
268
115
181

Greasing
hole
H
15
15
15
15
18
18
18
18
18
18
18
18
18
18
18
18
18
15
17

B1
B2
56
58
77
79
92
94
146 130
74

122

194

104
30
125
35
146
45
93

153

243 224
105

177

122

250

100

147.9 49.4

B3 PCD

82

82

82

82

92

92

92

77

77

77

98

98

98

100

100

100

100

85
65.4 95

d1
9
9
9
9
11
11
11
11
11
11
11
11
11
11
11
11
11
9
11

d2
14
14
14
14
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
14

h
8.5
8.5
8.5
8.5
11
11
11
11
11
11
11
11
11
11
11
11
11
8.5

Tw

75
75
75

82

N1

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

kgcm2/mm
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2

kg
1.57
1.93
2.17
2.96
2.57
2.57
4.87
2.03
2.3
2.57
3.45
4.84
6.93
4.07
5.45
4.38
7.8
2.75
5.99

kg/m
7.39
7.39
7.39
7.39
6.96
6.96
6.96
6.51
6.51
6.51
6.51
6.51
6.51
6.41
6.41
6.8
6.8
7.24
7.34

For model number coding, see A15-248.

OptionsA15-349

A15-199

Ball Screw

BNFN

502E

Preload Type of Precision

Ball Screw

Tw
A
(Greasing hole)

22.5

Screw shaft
outer diameter

40

Lead

5 to 10

L1
B1

H
h

d1

d2

Dg6

dc d

D1 dp

PCD

90

B2
DIK (2805 to 6312)

Screw
shaft outer
diameter

Lead

Ph

Model No.

BIF
5

4005-6

10

No. of
loaded
circuits

dc
37.2

Rows turns
21.5

Basic load rating

Rigidity

Ca

C0a

kN
13

kN
42.3

N/m
810

BIF

4005-9

40.75

37.2

31.5

18.5

63.5

1200

4005-10

40.75

37.2

22.5

20.3

70.6

1320
1580

40.75

37.2

41.5

23.7

84.7

BIF

4006-5

41

36.4

12.5

15.3

44.1

710

BIF

4006-10

41

36.4

22.5

27.7

88.1

1360
2010

BNFN 4006-7.5
40

Thread
minor
diameter

BIF

BNFN 4005-6
6

Ball
centerto-center
diameter
dp
40.75

41

36.4

32.5

39.2

132.3

BIF

4008-5

41.25

35.5

12.5

19.6

52.8

730

BIF

4008-6

41.25

35.5

21.5

22.9

63.4

860
1410

BIF

4008-10

41.25

35.5

22.5

35.7

105.8

BIF

4010-5

41.75

34.4

12.5

29

70.4

750

BIF

4010-6

41.75

34.4

21.5

33.8

84.5

900

BIF

4010-7

41.75

34.4

13.5

38.8

99

1050

BIF

4010-10

41.75

34.4

22.5

52.7

141.1

1470

DIK

4010-6

41.75

34.7

31

29.8

69.3

750

DIK

4010-8

41.75

34.7

41

38.1

92.4

1000

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
These models can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.

A15-200

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

PCD

d1

d2

60

L1
B1

dc d Dg6

D1 dp

A
(Greasing hole)

BIF
PCD
h

d1

d2
D1 dp

60

A
(Greasing hole)

L1
B1

dc d Dg6

B2
BNFN

Outer Flange Overall

diameter diameter length

Greasing
hole

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

kg
1.69

kg/m
9.06

d1d2h
9148.5

Tw

A
M6

kgcm2/mm
1.9710-2

83

9148.5

M6

1.9710-2

2.11

9.06

83

9148.5

M6

1.9710-2

1.85

9.06

83

9148.5

M6

1.9710-2

2.82

9.06

86

9148.5

M6

1.9710-2

1.63

8.82

87

86

9148.5

M6

1.9710-2

2.29

8.82

15

147

86

9148.5

M6

1.9710-2

3.29

8.82

82

15

67

90

9148.5

M6

1.9710-2

2.19

8.72

108

111

15

96

90

9148.5

M6

1.9710-2

2.74

8.72

74

108

130

15

115

90

9148.5

M6

1.9710-2

3.17

8.72

82

124

103

18

85

102

1117.511

M6

1.9710-2

3.69

8.22

82

124

140

18

122

133

102

1117.511

M6

1.9710-2

4.56

8.22

82

124

123

18

105

116

102

1117.511

M6

1.9710-2

4.18

8.22

82

124

163

18

145

102

1117.511

M6

1.9710-2

5.33

8.22

62

104

113

18

95

25

82

1117.511

79

PT 1/8

1.9710-2

2.09

8.22

62

104

137

18

119

35

82

1117.511

79

PT 1/8

1.9710-2

2.42

8.22

D
67

D1
101

L1
81

H
15

B1
66

B2

67

101

101

15

86

67

101

89

15

74

67

101

156

15

141

70

104

66

15

51

70

104

102

15

70

104

162

74

108

74

PCD
83

For model number coding, see A15-248.

OptionsA15-349

A15-201

Ball Screw

Unit: mm

Nut dimensions

502E

Preload Type of Precision

Ball Screw

Screw shaft
outer diameter

40

Lead

12 to 40

Tw
A
(Greasing hole)

22.5

L1
B1

H
h

d1

d2

Dg6

dc d

D1 dp

PCD

90

B2
DIK (2805 to 6312)

4- d1

30

Tw

12
40
16
20
40

Model No.

BIF
BIF
BIF
DIK
DIK
DIK
BNFN
DKN
BLW

4012-5
4012-7
4012-10
4012-6
4012-8
4016-4
4016-5
4020-3
4040-3.6

B1

D1 dp

PCD

Screw Lead
shaft
outer
diameter
d
Ph

L1

30

A
(Greasing hole)

B2

B3

Dg6

D2

dc d

N1
BLW

Ball
Thread No. of Basic load rating
center- minor loaded
to-center diameter circuits
Ca
C0a
diameter
Rows turns kN
kN
dp
dc
42
34.1 12.5 33.9
79.2
42
34.1 13.5 45.4
110.7
42
34.1 22.5 61.6
158.8
41.75
34.4
31
30.6
72.3
41.75
34.4
41
39.2
96.4
41.75
34.4
21
21.5
68.4
42
34.1 22.5 61.4
158.8
41.75
34.7
31
29.4
69.3
41.75
35.2 21.8 38.7
99.2

Rigidity
K
N/m
770
1070
1490
790
1030
540
1500
750
1090

Outer
Flange
diameter diameter
D
84
84
84
62
62
62
84
62
84

D1
126
126
126
104
104
104
126
104
121

D2

73

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
These models can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.
Model BLW cannot be attached with seal.

A15-202

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1

Tw
A
(Greasing hole)

B1

H
h

22.5

d1

d2
D1 dp

PCD

dc d
Dg6

B2
90

DKN

PCD

H
h

d1

d2

60

L1
B1

dc d Dg6

D1 dp

A
(Greasing hole)
BIF

d1

d2
D1 dp

60

A
(Greasing hole)

L1
B1

dc d Dg6

B2
BNFN

Unit: mm

Nut dimensions
Overall
length
L1
119
143
191
138
163
120
280
223
191

H
18
18
18
18
18
18
22
18
17

B1
101
125
173
120
145
102
258
205
158

B2

142

35
45
30

25
54.5

B3 PCD

104

104

104

82

82

82

104

82
70.5 100

d1
11
11
11
11
11
11
11
11
11

d2
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5

h
11
11
11
11
11
11
11
11

Tw

79
79
79

79
87

N1

Screw shaft
inertial
Greasing moment/mm
hole

Nut
mass

Shaft
mass

kgcm2/mm
1.9710-2
1.9710-2
1.9710-2
1.9710-2
1.9710-2
1.9710-2
1.9710-2
1.9710-2
1.9710-2

kg
4.36
4.93
6.47
2.44
2.78
2.19
9.27
3.61
6.16

kg/m
8.12
8.12
8.12
8.5
8.5
8.83
8.55
9.03
9.01

A
M6
M6
M6
PT 1/8
PT 1/8
PT 1/8
M6
PT 1/8
M6

For model number coding, see A15-248.

OptionsA15-349

A15-203

Ball Screw

PCD

Model DK Model MDK Models BLK/WGF Model BNT

Preload Type of Precision

Ball Screw

H
h

PCD

502E

Screw shaft
outer diameter

45

Lead

6 to 20

L1
B1
d1

d2

dc d Dg6

D1 dp

60
A
(Greasing hole)

BIF

Screw
shaft outer
diameter

Lead

Ph

Model No.

8
45
10

Ball
centerto-center
diameter
dp
46

Thread
minor
diameter

No. of
loaded
circuits

dc
41.4

Rows turns
12.5

Basic load rating

Rigidity

Ca

C0a

kN
16

kN
49.6

N/m
770

BIF

4506A-5

BIF

4506A-10

46

41.4

22.5

29

99

1500

BNFN 4506A-7.5

46

41.4

32.5

41.2

150

2210

BIF

4508-5

46.25

40.6

12.5

20.7

59.5

790

BIF

4508-10

46.25

40.6

22.5

37.4

118.6

1540

BNFN 4508-7.5

46.25

40.6

32.5

53.1

178.4

2270

BIF

4510-5

46.75

39.5

12.5

30.7

79.3

830

BIF

4510-6

46.75

39.5

21.5

35.9

95.2

990

BIF

4510-10

46.75

39.5

22.5

55.6

158.8

1610

BNFN 4510-7.5

46.75

39.5

32.5

78.8

238.1

2370

12

BIF

4512-10

47

39.2

22.5

65.2

178.4

1640

20

BIF

4520-3

47.7

37.9

11.5

44.2

99

690

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.

A15-204

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

PCD
h

L1
B1

d2

d1

60 D1 dp

A
(Greasing hole)

dc d Dg6

B2
BNFN

Unit: mm

Greasing
hole

Outer Flange Overall

diameter diameter length

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

B2

PCD
96

d1d2h
9148.5

A
PT 1/8

kgcm2/mm
3.1610-2

kg
2.18

kg/m
11.31

92

96

9148.5

PT 1/8

3.1610-2

3.05

11.31

146

96

9148.5

PT 1/8

3.1610-2

4.25

11.31

74

105

1117.511

PT 1/8

3.1610-2

3.42

11.21

18

122

105

1117.511

PT 1/8

3.1610-2

4.86

11.21

212

18

194

105

1117.511

PT 1/8

3.1610-2

6.74

11.21

132

111

18

93

104

110

1117.511

PT 1/8

3.1610-2

4.35

10.65

88

132

144

18

126

127

110

1117.511

PT 1/8

3.1610-2

5.35

10.65

88

132

171

18

153

164

110

1117.511

PT 1/8

3.1610-2

6.19

10.65

88

132

261

18

243

224

110

1117.511

PT 1/8

3.1610-2

8.92

10.65

90

130

191

18

173

110

1117.511

PT 1/8

3.1610-2

6.98

10.54

98

142

135

20

115

120

1117.511

PT 1/8

3.1610-2

6.56

10.37

D
80

D1
114

L1
71

H
15

80

114

107

15

80

114

161

15

85

127

92

18

85

127

140

85

127

88

B1
56

For model number coding, see A15-248.

OptionsA15-349

A15-205

Ball Screw

Nut dimensions

502E

Preload Type of Precision

Ball Screw

Tw
A
(Greasing hole)

22.5

Screw shaft
outer diameter

50

Lead

5 to 10

L1
B1

H
h

d1

d2

Dg6

dc d

D1 dp

PCD

90

B2
DIK (2805 to 6312)

Screw
shaft outer
diameter

Lead

Ph
BIF

5005-6

Ball
centerto-center
diameter
dp
50.75

Model No.

50

10

Thread
minor
diameter

No. of
loaded
circuits

dc
47.2

Basic load rating

Rigidity

Ca

C0a

Rows turns
21.5

kN
14.2

kN
53

N/m
970
1420

BIF

5005-9

50.75

47.2

31.5

20.2

79.5

BIF

5008-5

51.25

45.5

12.5

21.6

66.2

860

BIF

5008-10

51.25

45.5

22.5

39.1

132.3

1680

BNFN 5008-7.5

2470

51.25

45.5

32.5

55.4

198.9

DIK

5010-6

51.75

44.4

31

33.9

90.7

940

DIK

5010-8

51.75

44.4

41

43.4

120.5

1230

DIK

1530

5010-10

51.75

44.4

51

52.5

150.9

BIF

5010-5

51.75

44.4

12.5

32

88.2

900

BIF

5010-6

51.75

44.4

21.5

37.5

105.8

1080

BIF

5010-7

51.75

44.4

13.5

42.8

123.5

1240

BIF

5010-10

51.75

44.4

22.5

58.2

176.4

1750

BNFN 5010-7.5

51.75

44.4

32.5

82.5

264.6

2580

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.

A15-206

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

PCD

L1
B1
d1

d2

dc d Dg6

60 D1 dp
A
(Greasing hole)

BIF

PCD
h

d1

d2
D1 dp

60

A
(Greasing hole)

L1
B1

dc d Dg6

B2

Unit: mm

Nut dimensions
Outer Flange Overall
diameter diameter length

Greasing
hole

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

D
80

D1
114

L1
83

H
15

B1
68

B2

PCD
96

d1d2h
9148.5

Tw

A
PT 1/8

kgcm2/mm
4.8210-2

kg
2.38

kg/m
14.42

80

114

103

15

88

96

9148.5

PT 1/8

4.8210-2

2.46

14.42

87

129

85

18

67

107

1117.511

PT 1/8

4.8210-2

3.16

14.0

87

129

133

18

115

107

1117.511

PT 1/8

4.8210-2

4.51

14.0

87

129

205

18

187

107

1117.511

PT 1/8

4.8210-2

6.35

14.0

72

123

114

18

96

30

101

1117.511

92

PT 1/8

4.8210-2

2.65

13.38

72

123

137

18

119

35

101

1117.511

92

PT 1/8

4.8210-2

3.03

13.38

72

123

160

18

142

45

101

1117.511

92

PT 1/8

4.8210-2

3.41

13.38

93

135

103

18

85

113

1117.511

PT 1/8

4.8210-2

4.31

13.38

93

135

140

18

122

133

113

1117.511

PT 1/8

4.8210-2

5.55

13.38

93

135

123

18

105

116

113

1117.511

PT 1/8

4.8210-2

5.03

13.38

93

135

163

18

145

113

1117.511

PT 1/8

4.8210-2

6.26

13.38

93

135

253

18

235

216

113

1117.511

PT 1/8

4.8210-2

9.19

13.38

For model number coding, see A15-248.

OptionsA15-349

A15-207

Ball Screw

BNFN

502E

Preload Type of Precision

Ball Screw
Tw
22.5

A
(Greasing hole)

Screw shaft
outer diameter

50

Lead

12 to 50

L1
B1

H
h

d1

d2

Dg6

B2

90

30

4- d1

DIK (2805 to 6312)

L1

30

D1 dp

Tw

Screw Lead
shaft outer
diameter

Model No.

Ph
DIK
12

20

A
(Greasing hole)

B2

B3

Dg6

D2

dc d

N1
BLW

Ball
Thread No. of Basic load rating Rigidity
center- minor loaded
Outer
Flange
to-center diameter circuits
K
Ca
C0a
diameter diameter
diameter
Rows turns kN
kN
N/m
D
D1
dp
dc
52.25
43.3
31
45.8
113
970
75
129

D2

DIK

5012-8

52.25

43.3

41

58.6

150.6

1270

75

129

BIF

5012-5

52.25

43.3

12.5

43.4

109.8

930

100

146

BIF

5012-7

52.25

43.3

13.5

58

153.9

1280

100

146

BIF

5012-10

52.25

43.3

22.5

78.8

220.5

1810

100

146

DIK

5016-4

52.25

43.3

21

32.3

75.5

660

75

129

DIK

5016-6

52.25

43.3

31

45.7

113.3

970

75

129

BIF

5016-5

52.7

42.9

12.5

72.6

183.3

1230

105

152

BIF

5016-10

52.7

42.9

22.5

132.3

366.5

2360

105

152

52.25

43.6

31

44.2

108.8

930

75

129

50
16

5012-6

B1

PCD

dc d

D1 dp

PCD

DKN 5020-3
BIF

50

5020-5

BLW 5050-3.6

52.7

42.9

12.5

72.5

183.3

1230

105

152

52.2

44.1

21.8

57.8

155

1340

106

149

90

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.
Model BLW cannot be attached with seal.

A15-208

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1

Tw
A
(Greasing hole)

B1

H
h

22.5

d1

d2
D1 dp

PCD

dc d
Dg6

B2

90
DKN

L1
B1

H
h

PCD

d1

d2

dc d Dg6

D1 dp

60

Ball Screw

A
(Greasing hole)

BIF
Unit: mm

Nut dimensions
Overall
length

Screw shaft
inertial
Greasing moment/mm
hole

Nut
mass

Shaft
mass

L1
145

H
22

B1
123

B2
35

B3

PCD
105

d1
14

d2
20

h
13

Tw
98

N1

A
PT 1/8

kgcm2/mm
4.8210-2

kg
3.83

kg/m
12.74

170

22

148

45

105

14

20

13

98

PT 1/8

4.8210-2

4.31

12.74

123

22

101

114

122

14

20

13

PT 1/8

4.8210-2

6.02

12.74

147

22

125

138

122

14

20

13

PT 1/8

4.8210-2

7.2

12.74

195

22

173

186

122

14

20

13

PT 1/8

4.8210-2

9.05

12.74

129

22

107

30

105

14

20

13

98

PT 1/8

4.8210-2

3.52

13.41

175

22

153

45

105

14

20

13

98

PT 1/8

4.8210-2

4.41

13.41

164

25

139

128

14

20

13

PT 1/8

4.8210-2

9.18

12.5

260

25

235

128

14

20

13

PT 1/8

4.8210-2

13.30

12.5

243

28

215

30

105

14

20

13

98

PT 1/8

4.8210-2

6.0

13.8

201

28

173

128

14

20

13

PT 1/8

4.8210-2

11.02

13.1

245

20

203.8 70.7

91.7

126

14

108

M6

4.8210-2

9.06

14.08

For model number coding, see A15-248.

OptionsA15-349

A15-209

502E

Preload Type of Precision

Ball Screw

Screw shaft
outer diameter

55

Lead

10 to 20

PCD

60

A
(Greasing hole)

BNFN

Screw
shaft outer
diameter

Lead

Ph

Ball
centerto-center
diameter
dp
56.75

Thread
minor
diameter

No. of
loaded
circuits

dc
49.5

BNFN 5510-5

56.75

BNFN 5510-7.5

56.75

BNFN 5512-2.5

Model No.

55

12

16
20

Rigidity

Ca

C0a

Rows turns
12.5

kN
33.4

kN
97

N/m
970

49.5

22.5

60.7

194

1890

49.5

32.5

85.9

291.1

2770

57

49.2

12.5

39.3

108.8

990

BNFN 5512-3

57

49.2

21.5

46

131.3

1180

BNFN 5512-3.5

57

49.2

13.5

52.4

152.9

1360

BNFN 5512-5

57

49.2

22.5

71.3

218.5

1920

BNFN 5512-7.5

57

49.2

32.5

100.9

327.3

2830

BNFN 5516-2.5

57.7

47.9

12.5

76.1

201.9

1310

BNFN 5516-5

57.7

47.9

22.5

138.2

402.8

2550

BNFN 5520-2.5

57.7

47.9

12.5

76

201.9

1320

BNFN 5520-5

57.7

47.9

22.5

138.2

403.8

2550

BNFN 5510-2.5
10

Basic load rating

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.

A15-210

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1
B1

H
d1

d2
D1 dp

dc d Dg6

B2
BNFN

Unit: mm

Nut dimensions
Greasing
hole

Nut
mass

Shaft
mass

kg
6.54

kg/m
16.43
16.43

D
102

D1
144

L1
141

H
18

B1
123

PCD
122

d1d2h
1117.511

A
PT 1/8

kgcm2/mm
7.0510-2

102

144

201

18

183

122

1117.511

PT 1/8

7.0510-2

8.88

102

144

261

18

243

122

1117.511

PT 1/8

7.0510-2

11.23

16.43

105

147

165

18

147

125

1117.511

PT 1/8

7.0510-2

8.07

16.29

105

147

191

18

173

125

1117.511

PT 1/8

7.0510-2

9.17

16.29

105

147

189

18

171

125

1117.511

PT 1/8

7.0510-2

9.09

16.29

105

147

237

18

219

125

1117.511

PT 1/8

7.0510-2

11.13

16.29

105

147

309

18

291

125

1117.511

PT 1/8

7.0510-2

14.19

16.29

110

158

196

25

171

133

142013

PT 1/8

7.0510-2

11.28

15.46

110

158

292

25

267

133

142013

PT 1/8

7.0510-2

15.94

15.46

112

158

227

28

199

134

142013

PT 1/8

7.0510-2

13.49

16.1

112

158

347

28

319

134

142013

PT 1/8

7.0510-2

19.61

16.1

For model number coding, see A15-248.

OptionsA15-349

A15-211

Ball Screw

Outer
Flange Overall
diameter diameter length

Screw shaft
inertial
moment/mm

502E

Preload Type of Precision

Ball Screw

Tw
A
(Greasing hole)

22.5

Screw shaft
outer diameter

63

Lead

10 to 20

L1
B1

H
h

d1

d2

Dg6

dc d

D1 dp

PCD

90

B2
DIK (2805 to 6312)

Screw
shaft outer
diameter

Lead

Ph

Ball
centerto-center
diameter
dp
64.75

Thread
minor
diameter

No. of
loaded
circuits

dc
57.7

BNFN 6310-2.5

64.75

BNFN 6310-5

64.75

BNFN 6310-7.5
DIK

6312-6

DIK

6312-8

Model No.

63

12

16

20

Rigidity

Ca

C 0a

Rows turns
41

kN
49.5

kN
160.7

N/m
1550

57.7

12.5

35.4

111.7

1090

57.7

22.5

64.2

222.5

2100

64.75

57.7

32.5

90.9

334.2

3090

65.25

56.3

31

51.9

147.4

1200

65.25

56.3

41

66.4

196.6

1570

BNFN 6312A-2.5

65.25

56.3

12.5

48.1

139.2

1120

BNFN 6312A-5

65.25

56.3

22.5

87.4

278.3

2160

DIK
10

Basic load rating

6310-8

BNFN 6316-2.5

65.7

55.9

12.5

81.1

231.3

1470

BNFN 6316-5

65.7

55.9

22.5

147

462.6

2840

BNFN 6320-2.5

65.7

55.9

12.5

81

231.3

1470

BNFN 6320-5

65.7

55.9

22.5

147

463.5

2640

DKN

65.7

55.9

31

83.5

229.3

1470

6320-3

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.

A15-212

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1

Tw
A
(Greasing hole)

B1

H
h

22.5

d1

d2
D1 dp

PCD

dc d
Dg6

B2

90
DKN

PCD
h

d1

d2
D1 dp

60

dc d Dg6

Ball Screw

A
(Greasing hole)

L1
B1

B2
BNFN
Unit: mm

Nut dimensions
Outer Flange Overall
diameter diameter length

Greasing
hole

Screw shaft
inertial
moment/mm

Nut
mass

Shaft
mass

B1
119

B2
35

PCD
122

d1d2h
142013

Tw
110

A
PT 1/8

kgcm2/mm
1.2110-1

kg
4.16

kg/m
21.93

22

115

130

142013

PT 1/8

1.2110-1

6.98

21.93

22

175

130

142013

PT 1/8

1.2110-1

9.4

21.93

257

22

235

130

142013

PT 1/8

1.2110-1

11.81

21.93

146

146

22

124

35

122

142013

110

PT 1/8

1.2110-1

4.93

21.14

D
85

D1
146

L1
141

H
22

108

154

137

108

154

197

108

154

90
90

146

171

22

149

45

122

142013

110

PT 1/8

1.2110-1

5.56

21.14

115

161

159

22

137

137

142013

PT 1/8

1.2110-1

9.32

21.14

115

161

231

22

209

137

142013

PT 1/8

1.2110-1

12.84

21.14

122

184

208

24

184

152

182617.5

PT 1/8

1.2110-1

14.61

20.85

122

184

304

24

280

152

182617.5

PT 1/8

1.2110-1

20.19

20.85

122

180

227

28

199

150

182617.5

PT 1/8

1.2110-1

15.91

20.85

122

180

347

28

319

150

182617.5

PT 1/8

1.2110-1

22.88

20.85

95

159

243

28

215

30

129

182617.5 121

PT 1/8

1.2110-1

9.5

20.85

For model number coding, see A15-248.

OptionsA15-349

A15-213

502E

Preload Type of Precision

Ball Screw

Screw shaft
outer diameter

70 to 100

Lead

10 to 20

PCD

60

A
(Greasing hole)

BNFN

Screw
shaft outer
diameter

Lead

Ph

Ball
centerto-center
diameter
dp
71.75

Thread
minor
diameter

No. of
loaded
circuits

dc
64.5

BNFN 7010-5

71.75

BNFN 7010-7.5

71.75

BNFN 7012-2.5

Model No.

70
12
20
10
80

12
20

100

20

Rigidity

Ca

C0a

Rows turns
12.5

kN
36.8

kN
123.5

N/m
1180

64.5

22.5

66.9

247

2280

64.5

32.5

94.9

371.4

3350

72

64.2

12.5

43.5

139.2

1200

BNFN 7012-5

72

64.2

22.5

78.9

278.3

2320

BNFN 7012-7.5

72

64.2

32.5

111.7

417.5

3420

BNFN 7020-5

72.7

62.9

22.5

153.9

514.5

3090

BNFN 8010-2.5

81.75

75.2

12.5

38.9

141.1

1300

BNFN 8010-5

81.75

75.2

22.5

70.6

283.2

2530

BNFN 8010-7.5

81.75

75.2

32.5

100

424.3

3720

BNFN 8012-5

82.3

74.1

22.5

96.5

353.8

2620

BNFN 8020A-2.5

82.7

72.9

12.5

90.1

294

1770

BNFN 8020A-5

82.7

72.9

22.5

163.7

589

3430

BNFN 10020A-2.5

102.7

92.9

12.5

99

368.5

2110

BNFN 10020A-5

102.7

92.9

22.5

179.3

737

4080

BNFN 10020A-7.5

102.7

92.9

32.5

253.8

1105.4

6010

BNFN 7010-2.5
10

Basic load rating

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.

A15-214

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1
B1

d1

d2
D1 dp

dc d Dg6

B2
BNFN

Unit: mm

Nut dimensions
Greasing
hole

Nut
mass

Shaft
mass

D
125

D1
167

L1
141

H
18

B1
123

PCD
145

d1d2h
1117.511

A
PT 1/8

kgcm2/mm
1.8510-1

kg
9.19

kg/m
27.4

125

167

201

18

183

145

1117.511

PT 1/8

1.8510-1

12.57

27.4

125

167

261

18

243

145

1117.511

PT 1/8

1.8510-1

15.96

27.4

128

170

165

18

147

148

1117.511

PT 1/8

1.8510-1

11.26

27.24

128

170

237

18

219

148

1117.511

PT 1/8

1.8510-1

15.63

27.24

128

170

309

18

291

148

1117.511

PT 1/8

1.8510-1

20.0

27.24

130

186

325

28

297

158

182617.5

PT 1/8

1.8510-1

23.4

27.0

130

176

137

22

115

152

142013

PT 1/8

3.1610-1

9.15

36.26

130

176

197

22

175

152

142013

PT 1/8

3.1610-1

12.41

36.26

130

176

257

22

235

152

142013

PT 1/8

3.1610-1

15.67

36.26

135

181

231

22

209

157

142013

PT 1/8

3.1610-1

16.02

35.26

143

204

227

28

199

172

182617.5

PT 1/8

3.1610-1

20.08

35.81

143

204

347

28

319

172

182617.5

PT 1/8

3.1610-1

28.97

35.81

170

243

231

32

199

205

223221.5

PT 1/8

7.7110-1

28.15

57.13

170

243

351

32

319

205

223221.5

PT 1/8

7.7110-1

39.99

57.13

170

243

471

32

439

205

223221.5

PT 1/8

7.7110-1

51.84

57.13

For model number coding, see A15-248.

OptionsA15-349

A15-215

Ball Screw

Outer
Flange Overall
diameter diameter length

Screw shaft
inertial
moment/mm

502E

No Preload Type of Precision

Ball Screw
30

30

Lead

1 to 40

L1
B1

Dg6

D1 dp

A
(Greasing hole) WHF/WGF

Tw

L1
B1

H
h

D1

PCD

dc d

N1

d1

d2

60

4 to 15

4- d1

PCD

Tw

Screw shaft
outer diameter

dc d

dp
Dg6

A
(Greasing hole)

B2
DK

Screw Lead
shaft
outer
diameter
d
4
6
8
10
12
13
14

Ph
1
1
1
2
12
2
15
2
20
2
4
5
10
20

15

30
40

Model No.

MDK
MDK
MDK
MDK
WGF
MDK
WGF
MDK
WGF
MDK
MDK
DK
DK
MDK
BLK
WGF
WGF
WGF
WGF
WHF
WGF
WHF

0401-3
0601-3
0801-3
0802-3
0812-3
1002-3
1015-3
1202-3
1320-3
1402-3
1404-3
1404-4
1404-6
1405-3
1510-5.6
1520-1.5
1520-3
1530-1
1530-3
1530-3.4
1540-1.5
1540-3.4

Ball
Thread No. of
centerminor
loaded
to-center diameter circuits
diameter
dp
4.15
6.2
8.2
8.3
8.4
10.3
10.5
12.3
13.5
14.3
14.65
14.5
14.5
14.75
15.75
15.75
15.75
15.75
15.75
15.75
15.75
15.75

dc
3.4
5.3
7.3
7
6.6
9
8.3
11
10.8
13
11.9
11.8
11.8
11.2
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5

Rows turns
31
31
31
31
21.65
31
21.65
31
21.65
31
31
41
61
31
22.8
11.5
21.5
20.6
21.6
21.7
20.75
21.7

Basic load rating

Rigidity

Ca

C 0a

kN
0.29
0.54
0.64
1.4
2.2
1.5
3.3
1.7
4.7
1.8
4.2
5.4
7.7
7
14.3
4.4
8.1
3.5
8.1
8
3.9
7.7

kN
0.42
0.94
1.4
2.3
3.9
2.9
6.2
3.6
9.6
4.3
7.6
10.2
15.4
11.6
27.8
7.9
15.8
5.4
14.6
14.4
7.4
16.3

N/m
35
60
80
80
110
100
140
120
180
190
190
180
270
140
340
100
190
90
220
195
110
209

Outer
Flange
diameter diameter
D
9
11
13
15
18
17
23
19
28
21
26
26
26
26
34
32
32
32
32
32
32
34

D1
19
23
26
28
31
34
40
36
45
40
45
45
45
45
57
53
53
53
53
53
53
57

Note) Models MDK0401, 0601 and 0801 is not provided with a labyrinth seal.
Models MDK0401, 0601, 0801, model WHF, model WGF and Large Lead Precision Ball Screw model BLK cannot be attached with seal.

A15-216

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

30

30

4- d1

Dg6

D1 dp

PCD

dc d

N1

Tw
A
(Greasing hole)

BLK

Tw
A
(Greasing hole)

L1
B1

L1
B1

4- d1

dc d Dg6

D1 dp

PCD

MDK

Unit: mm

Nut dimensions
Overall
length
L1
13
14.5
15
22
27
22
33
22
43
23
33
48
60
42
44
45
45
33
63
64.5
42
81.6

H
3
3.5
4
5
4
5
5
5
5
6
6
10
10
10
10
10
10
10
10
10
10
10

B1
10
11
11
17
17
17
22
17
29
17
27
38
50
32
24
28
28
17
47
47.5
26.3
64.6

B2

10
10

PCD
14
17
20
22
25
26
32
28
37
31
36
35
35
36
45
43
43
43
43
43
43
45

d1
2.9
3.4
3.4
3.4
3.4
4.5
4.5
4.5
4.5
5.5
5.5
4.5
4.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5

d2

8
8

4.5
4.5

Tw
13
15
17
19
20
21
25
23
30
26
28
29
29
28
40
33
33
33
33
33
33
40

N1

5
5
5
5
5
5
5
5

Screw shaft
inertial
Greasing moment/mm
hole

Nut
mass

Shaft
mass

kgcm2/mm
1.9710-6
9.9910-6
3.1610-5
3.1610-5
3.1610-5
7.7110-5
7.7110-5
1.610-4
2.210-4
2.9610-4
2.9610-4
2.9610-4
2.9610-4
2.9610-4
3.910-4
3.910-4
3.910-4
3.910-4
3.910-4
3.910-4
3.910-4
3.910-4

kg
0.01
0.017
0.024
0.034
0.054
0.045
0.11
0.05
0.18
0.15
0.13
0.2
0.23
0.18
0.34
0.29
0.29
0.23
0.38
0.38
0.28
0.48

kg/m
0.07
0.14
0.29
0.27
0.35
0.47
0.55
0.71
0.96
1.0
0.8
1
1
0.91
0.31
1.22
1.22
1.26
1.26
1.26
1.28
1.28

M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

For model number coding, see A15-248.

OptionsA15-349

A15-217

Ball Screw

60

502E

No Preload Type of Precision

Ball Screw

H
h

PCD

Screw shaft
outer diameter

16 to 18

Lead

4 to 16

L1
B1

d1

d2

dc d Dg6

D1 dp

60
A
(Greasing hole)

BNF

Screw Lead
shaft
outer
Model No.
diameter
d
Ph
4
BNF
1604-3

5
16
6
10
16
18

10

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C0a
diameter
dp
dc
Rows turns
kN
kN
16.5
13.8
21.5
5.1
10.5

Rigidity
K
N/m
180

Outer
Flange
diameter diameter
D
36

D1
59

BNF

1605-2.5

16.75

13.2

12.5

7.4

13.9

170

40

60

BNF

1605-3

16.75

13.2

21.5

8.7

16.8

200

40

60

BNF

1605-5

16.75

13.2

22.5

13.5

27.8

320

40

60

DK

1605-3

16.75

13.1

31

7.4

13

160

30

49

DK

1605-4

16.75

13.1

41

9.5

17.4

210

30

49

BNF

1606-2.5

16.8

13.2

12.5

7.5

14

170

40

60

BNF

1606-5

16.8

13.2

22.5

13.5

28

320

40

60

BNF

1610-1.5

16.8

13.5

11.5

4.8

8.5

100

40

63

BLK

1616-2.8

16.65

13.7

12.8

5.2

9.9

180

32

53

BLK

1616-3.6

16.65

13.7

21.8

7.1

14.3

220

32

53

BNF

1810-2.5

18.8

15.5

12.5

7.8

15.9

190

42

65

BNF

1810-3

18.8

15.5

21.5

9.2

19.1

220

42

65

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.
Large Lead Precision Ball Screw model BLK cannot be attached with seal.

A15-218

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

30

30

4- d1

Dg6

D1 dp

PCD

L1
B1

N1

Tw
A
(Greasing hole)

BLK

Tw

L1
B1

H
h

d1

d2
D1

PCD

dc d

dp
Dg6

A
(Greasing hole)

B2
DK
Unit: mm

Nut dimensions
Overall
length

Screw shaft
inertial
Greasing moment/mm
hole

Nut
mass

Shaft
mass

L1
45

H
11

B1
34

B2

PCD
47

d1
5.5

d2
9.5

h
5.5

Tw

N1

A
M6

kgcm2/mm
5.0510-4

kg
0.32

kg/m
1.35

41

10

31

50

4.5

4.5

M6

5.0510-4

0.37

1.24

51

10

41

50

4.5

4.5

M6

5.0510-4

0.47

1.24

56

10

46

50

4.5

4.5

M6

5.0510-4

0.49

1.24

45

10

35

10

39

4.5

4.5

31

M6

5.0510-4

0.24

1.25

50

10

40

10

39

4.5

4.5

31

M6

5.0510-4

0.26

1.25

44

10

34

50

4.5

4.5

M6

5.0510-4

0.41

1.3

62

10

52

50

4.5

4.5

M6

5.0510-4

0.49

1.3

42

11

31

51

5.5

9.5

5.5

M6

5.0510-4

0.32

1.41

54

10

37.5

42

4.5

38

M6

5.0510-4

0.32

1.41

38

10

21.5

42

4.5

38

M6

5.0510-4

0.21

1.41

69

12

57

53

5.5

9.5

5.5

M6

8.0910-4

0.67

1.81

75

12

63

53

5.5

9.5

5.5

M6

8.0910-4

0.63

1.81

For model number coding, see A15-248.

OptionsA15-349

A15-219

Ball Screw

60

dc d

502E

No Preload Type of Precision

Ball Screw
H
h

PCD

60

20

Lead

4 to 60

L1
B1
d1

d2

A
(Greasing hole)

Screw shaft
outer diameter

dc d Dg6

D1 dp

BNF
Tw

L1
B1

H
h

d1

d2
D1 dp

PCD

60
Screw Lead
shaft
outer
diameter
d
Ph
4

6
20
8
10
12
20
25
30
40
60

Model No.
BNF
BNF
DK
DK
BNF
BNF
BNF
BNF
DK
DK
BNF
BNF
BNF
BNF
DK
DK
BNF
DK
BNF
BNF
BLK
WHF
BLK
WHF
WHF
WGF
WGF
WHF
WGF

2004-2.5
2004-5
2004-3
2004-4
2005-2.5
2005-3
2005-3.5
2005-5
2005-3
2005-4
2006-2.5
2006-3
2006-3.5
2006-5
2006-3
2006-4
2008-2.5
2008-4
2010A-1.5
2012-1.5
2020-2.8
2020-3.4
2020-3.6
2025-3.4
2030-3.4
2040-1
2040-3
2040-3.4
2060-1.5

A
(Greasing hole)

dc d

Dg6

B2
DK

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C0a
diameter
dp
dc
Rows turns
kN
kN
20.5
17.8
12.5
4.8
10.9
20.5
17.8
22.5
8.6
21.8
20.5
17.8
31
5.2
11.6
20.5
17.8
41
6.6
15.5
20.75
17.2
12.5
8.3
17.4
20.75
17.2
21.5
9.7
21
20.75
17.2
13.5
11.1
24.5
20.75
17.2
22.5
15.1
35
20.75
17.1
31
8.5
17.3
20.75
17.1
41
11
23.1
20.75
17.2
12.5
8.3
17.5
20.75
17.2
21.5
9.7
21
20.75
17.2
13.5
11.1
24.5
20.75
17.2
22.5
15.1
35
21
16.4
31
11.4
21.5
21
16.4
41
14.6
28.6
21
16.4
12.5
11.1
21.9
21
16.4
41
14.6
28.8
21
16.4
11.5
7.2
13.2
21
16.4
11.5
7.1
12.5
20.75
17.5
12.8
8.1
17.2
20.75
17.5
21.7
9.6
21
20.75
17.5
21.8
11.1
24.7
20.75
17.6
21.7
9.8
22.3
20.75
17.6
21.7
9.9
23.5
20.75
17.5
20.65
4.3
8
20.75
17.5
21.65
9.5
20.2
20.75
17.5
21.7
9.6
20.3
20.75
17.5
20.75
4.5
11

Rigidity
K
N/m
180
350
190
250
200
240
270
380
200
260
200
240
270
380
410
540
210
270
130
130
230
225
290
236
243
110
280
256
140

Outer
Flange
diameter diameter
D
40
40
32
32
44
44
44
44
34
34
48
48
48
48
35
35
46
35
46
48
39
42
39
39
39
37
37
37
37

D1
63
63
56
56
67
67
67
67
58
58
71
71
71
71
58
58
74
58
74
71
62
64
62
62
62
57
57
57
57

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Model WHF, model WGF and Large Lead Precision Ball Screw model BLK cannot be attached with seal.

A15-220

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

30

30

L1
B1

4- d1

Dg6

D1 dp

PCD

N1

Tw
A
(Greasing hole)

30

30

WHF2020/BLK
L1

4- d1

B1

Dg6

D1 dp

PCD

A
(Greasing hole) WHF/WGF

Tw

Unit: mm

B1
26
38
31
35
30
41
34
45
35
40
33
45
39
51
41
48
45
58
43
46
47.5
24.1
27.5
33.2
43.3
25
65
65.7
40.1

B2

10
10

10
10

10
10

15

PCD
51
51
44
44
55
55
55
55
46
46
59
59
59
59
46
46
59
46
59
59
50
53
50
50
50
47
47
47
47

d1
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5

d2
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5

h
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5

Tw

35
35

36
36

36
36

36

46
46
46
46
46
38
38
38
38

N1

5
5
5
5
5
5.5
5.5
5
5

Screw shaft
inertial
Greasing
moment/mm
hole

Nut
mass

Shaft
mass

kgcm2/mm
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3
1.2310-3

kg
0.3
0.49
0.26
0.27
0.46
0.53
0.53
0.6
0.31
0.34
0.51
0.68
0.62
0.8
0.36
0.39
0.69
0.45
0.77
0.9
0.49
0.49
0.35
0.51
0.55
0.24
0.48
0.58
0.4

kg/m
2.18
2.18
2.18
2.18
2.05
2.05
2.05
2.05
2.06
2.06
2.12
2.12
2.12
2.12
1.93
1.93
2.06
2.06
2.14
2.19
2.25
2.25
2.25
2.26
2.28
2.34
2.34
2.34
2.37

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

For model number coding, see A15-248.

OptionsA15-349

A15-221

Ball Screw

Overall
length
H
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
15
11
15
18
10
10
10
10
10
10
10
10
10

dc d

N1

Nut dimensions

L1
37
49
42
46
41
52
45
56
46
51
44
56
50
62
52
59
60
69
58
64
65
47.1
45
56.2
65.3
41
81
82.7
60

dc d

502E

No Preload Type of Precision

Ball Screw

H
h

PCD
d2

60

Screw shaft
outer diameter

25

Lead

4 to 16

L1
B1

d1

dc d Dg6

D1 dp

A
(Greasing hole)

BNF
Screw Lead
shaft
outer
diameter
d
Ph
4

25

10
12
16

Model No.

BNF
BNF
DK
DK
BNF
BNF
BNF
BNF
DK
DK
BNF
BNF
BNF
BNF
DK
DK
BNF
BNF
BNF
BNF
DK
DK
BNF
DK
DK
BNF
BNF

2504-2.5
2504-5
2504-3
2504-4
2505-2.5
2505-3
2505-3.5
2505-5
2505-3
2505-4
2506-2.5
2506-3
2506-3.5
2506-5
2506-3
2506-4
2508-2.5
2508-3
2508-3.5
2508-5
2508-3
2508-4
2510A-2.5
2510-3
2510-4
2512-2.5
2516-1.5

Thread No. of Basic load rating

Ball
minor
loaded
centerto-center diameter circuits
Ca
C0a
diameter
dp
dc
Rows turns
kN
kN
25.5
22.8
12.5
5.2
13.7
25.5
22.8
22.5
9.5
27.3
25.5
22.8
31
5.7
15
25.5
22.8
41
7.4
19.9
25.75
22.2
12.5
9.2
22
25.75
22.2
21.5
10.8
26.4
25.75
22.2
13.5
12.3
30.7
25.75
22.2
22.5
16.7
44
25.75
22.1
31
9.7
22.6
25.75
22.1
41
12.4
30.3
26
21.4
12.5
12.5
27.3
26
21.4
21.5
14.6
32.8
26
21.4
13.5
15.1
35.9
26
21.4
22.5
22.5
54.8
26
21.4
31
12.8
27
26
21.4
41
16.8
37.4
26.25
20.5
12.5
15.8
32.8
26.25
20.5
21.5
18.5
39.4
26.25
20.5
13.5
21.2
46
26.25
20.5
22.5
28.7
65.8
26
21.4
31
13.1
28.1
26
21.4
41
16.8
37.5
26.3
21.4
12.5
15.8
33
26
21.6
31
12.7
27
26
21.6
41
16.7
37.6
26
21.9
12.5
12.3
27.6
26
21.4
11.5
7.9
16.7

Rigidity
K
N/m
210
410
230
310
240
280
320
460
250
320
250
290
330
470
250
330
250
290
340
480
500
330
250
250
330
250
150

Outer
Flange
diameter diameter
D
46
46
38
38
50
50
50
50
40
40
53
53
53
53
40
40
58
58
58
58
40
40
58
40
40
53
53

D1
69
69
63
63
73
73
73
73
63
63
76
76
76
76
63
63
85
85
85
85
63
63
85
63
63
76
76

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
These models can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.

A15-222

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

Tw

L1
B1

H
h

d1

d2

60

dc d

dp

D1

PCD

Dg6

A
(Greasing hole)

B2
DK
Unit: mm

Nut dimensions
Overall
length
H
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
15
15
15
15
12
12
18
15
15
11
11

B1
25
37
32
36
29
41
34
44
35
40
33
45
39
51
41
49
43
56
51
67
50
59
52
65
70
49
49

B2

10
10

10
10

10
10

10
15

15
20

PCD
57
57
51
51
61
61
61
61
51
51
64
64
64
64
51
51
71
71
71
71
51
51
71
51
51
64
64

d1
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
6.6
6.6
6.6
6.6
5.5
5.5
6.6
5.5
5.5
5.5
5.5

d2
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
11
11
11
11
9.5
9.5
11
9.5
9.5
9.5
9.5

h
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
5.5
6.5
6.5
6.5
6.5
5.5
5.5
6.5
5.5
5.5
5.5
5.5

TW

39
39

41
41

41
41

41
41

41
41

Nut
mass

Shaft
mass

kgcm2/mm
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3

kg
0.21
0.55
0.33
0.35
0.52
0.66
0.6
0.68
0.38
0.41
0.61
0.85
0.79
0.91
0.41
0.46
1.07
1.27
1.29
1.44
0.48
0.54
1.43
0.62
0.65
0.86
0.96

kg/m
3.5
3.5
3.5
3.5
3.34
3.34
3.34
3.34
3.35
3.35
3.19
3.19
3.19
3.19
3.19
3.19
3.12
3.12
3.12
3.12
3.35
3.35
3.27
3.45
3.45
3.51
3.6

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

For model number coding, see A15-248.

OptionsA15-349

A15-223

Ball Screw

L1
36
48
43
47
40
52
45
55
46
51
44
56
50
62
52
60
58
71
66
82
62
71
70
80
85
60
60

Screw shaft
inertial
Greasing moment/mm
hole

502E

No Preload Type of Precision

Ball Screw
30

30

Tw

A
(Greasing hole)

Screw Lead
shaft
outer
diameter
d
Ph
25
25
50

28
6

8
10
30

60
90

BLK
WHF
BLK
WGF
WGF
WHF
BNF
BNF
BNF
BNF
BNF
DK
DK
BNF
BNF
BNF
BNF
DK
DK
BNF
BNF
BNF
BNF
DK
WGF
WGF
WGF

A
(Greasing hole) WHF2550/WGF

2525-2.8
2525-3.4
2525-3.6
2550-1
2550-3
2550-3.4
2805-2.5
2805-3
2805-3.5
2805-5
2805-7.5
2805-3
2805-4
2806-2.5
2806-3.5
2806-5
2806-7.5
2806-3
2806-4
2808-2.5
2808-3
2808-5
2810-2.5
2810-4
3060-1
3060-3
3090-1.5

DK

dc d

N1
L1
B1

H
h

D1 dp

Model No.

5 to 90

Dg6

d1

d2

90

Lead
B1

Tw
22.5

PCD

25 to 30

L1
4- d1

D1 dp

PCD

Screw shaft
outer diameter

Dg6

dc d

B2

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C0a
diameter
dp
dc
Rows turns
kN
kN
26
21.9
12.8
12.2
26.9
26
21.9
21.7
14.5
33.1
26
21.9
21.8
16.6
38.7
26
21.9
20.65
6.4
12.5
26
21.9
21.65
14.3
31.7
26
21.9
21.7
14.4
31.9
28.75
25.2
12.5
9.7
24.6
28.75
25.2
21.5
11.3
29.5
28.75
25.2
13.5
12.9
34.4
28.75
25.2
22.5
17.5
49.4
28.75
25.2
32.5
24.8
73.8
28.75
25.2
31
10.5
26.4
28.75
25.2
41
13.4
35.2
28.75
25.2
12.5
9.6
24.6
28.75
25.2
13.5
12.9
34.5
28.75
25.2
22.5
17.5
49.4
28.75
25.2
32.5
24.8
73.8
29
24.4
31
14
32
29
24.4
41
18
42.5
29.25
23.6
12.5
16.8
36.8
29.25
23.6
21.5
19.6
44.2
29.25
23.6
22.5
30.4
73.7
29.75
22.4
12.5
24
48.2
29.25
23.6
41
22.4
50
31.25
26.4
20.65
8.9
18
31.25
26.4
21.65
19.9
45.7
31.25
26.4
20.75
9.7
25.8

Rigidity
K
N/m
270
285
350
140
340
323
250
300
350
500
740
270
360
250
350
500
740
280
370
270
320
530
280
370
170
410
200

Flange
Outer
diameter diameter
D
47
50
47
45
45
45
55
55
55
55
55
43
43
55
55
55
55
43
43
60
60
60
65
45
55
55
55

D1
74
77
74
69
69
69
85
85
85
85
85
71
71
85
85
85
85
71
71
104
104
104
106
71
89
89
89

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Model WHF, model WGF and Large Lead Precision Ball Screw model BLK cannot be attached with seal.

A15-224

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1
B1

H
h

PCD

d1

d2

dc d Dg6

D1 dp

60

A
(Greasing hole)

BNF

30

30

Dg6

D1 dp

PCD

A
(Greasing hole)

WHF2525/BLK

Overall
length
B1
60
31.3
35
31.5
81.5
79.3
32
42
37
47
62
37
42
38
44
56
74
41
49
50
62
74
68
69
37
97
61.3

B2

10
10

10
10

20

PCD
60
63
60
57
57
57
69
69
69
69
69
57
57
69
69
69
69
57
57
82
82
82
85
57
71
71
71

d1
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
11
11
11
11
6.6
9
9
9

d2

11
11
11
11
11
11
11
11
11
11
11
11
11
17.5
17.5
17.5
17.5
11

6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
11
11
11
11
6.5

Tw
56
56
56
46
46
46

55
55

55
55

55
56
56
56

N1
6
6
6
7
7
6

9
9
9

Unit: mm

Screw shaft
inertial
Greasing moment/mm
hole

Nut
mass

Shaft
mass

kgcm2/mm
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
3.0110-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
4.7410-3
6.2410-3
6.2410-3
6.2410-3

kg
0.89
0.65
0.64
0.43
0.85
0.72
1.02
0.92
0.86
1.06
1.16
0.48
0.51
0.87
0.94
1.09
1.3
0.5
0.56
1.75
1.93
2.11
2.3
0.82
1.11
1.9
1.51

kg/m
3.52
3.52
3.52
3.66
3.66
3.66
4.27
4.27
4.27
4.27
4.27
4.27
4.27
4.36
4.36
4.36
4.36
4.36
4.36
4.02
4.02
4.02
3.66
4.18
5.28
5.28
5.34

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

For model number coding, see A15-248.

OptionsA15-349

A15-225

Ball Screw

Nut dimensions

H
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
18
18
18
18
15
15
15
15

dc d

N1

Tw

L1
80
58.8
55
52
102
103.3
44
54
49
59
74
49
54
50
56
68
86
53
61
68
80
92
86
84
62
122
92

L1
B1

4- d1

Model DK Model MDK Models BLK/WGF Model BNT

No Preload Type of Precision

Ball Screw

Screw shaft
outer diameter

32

Lead

4 to 12

Tw
22.5

L1
B1

H
h

A
(Greasing hole)

d2

502E

d1
Dg6
dc d

D1 dp

PCD

90

B2
DK

Screw Lead
shaft
outer
diameter
d
Ph
4

32

10

12

Model No.

BNF
DK
DK
BNF
BNF
BNF
BNF
BNF
DK
DK
DK
BNF
BNF
BNF
DK
DK
BNF
BNF
BNF
BNF
BNF
BNF
BNF
BNF
DK
DK
BNF
DK

3204-7.5
3204-3
3204-4
3205-2.5
3205-3
3205-4.5
3205-5
3205-7.5
3205-3
3205-4
3205-6
3206-2.5
3206-3
3206-5
3206-3
3206-4
3208A-2.5
3208A-3
3208A-4.5
3208A-5
3210A-2.5
3210A-3
3210A-3.5
3210A-5
3210-3
3210-4
3212-3.5
3212-4

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C0a
diameter
dp
dc
Rows turns
kN
kN
32.5
30
32.5
14.8
52.7
32.5
30.1
31
6.4
19.6
32.5
30.1
41
8.2
26.1
32.75
29.2
12.5
10.2
28.1
32.75
29.2
21.5
12
33.8
32.75
29.2
31.5
17
50.7
32.75
29.2
22.5
18.5
56.4
32.75
29.2
32.5
26.3
84.5
30.2
32.75
29.2
31
11.1
32.75
29.2
41
14.2
40.3
32.75
29.2
61
20.1
60.4
33
28.4
12.5
13.9
35.2
33
28.4
21.5
16.3
42.2
33
28.4
22.5
25.2
70.4
33
28.4
31
14.9
37.1
33
28.4
41
19.1
49.5
33.25
27.5
12.5
17.8
42.2
33.25
27.5
21.5
20.9
50.7
33.25
27.5
31.5
29.5
76
33.25
27.5
22.5
32.3
84.4
33.75
26.4
12.5
26.1
56.2
33.75
26.4
21.5
30.5
67.4
33.75
26.4
13.5
34.8
78.6
33.75
26.4
22.5
47.2
112.7
33.75
26.4
31
25.7
52.2
33.75
26.4
41
33
69.7
34
26.1
13.5
40.4
88.5
33.75
26.4
41
34.2
73.9

Rigidity
K
N/m
740
290
380
280
340
500
560
810
300
400
600
290
350
580
310
410
300
360
530
590
310
380
440
620
300
390
440
420

Flange
Outer
diameter diameter
D
54
45
45
58
58
58
58
58
46
46
46
62
62
62
48
48
66
66
66
66
74
74
74
74
54
54
76
54

D1
81
76
76
85
85
85
85
85
76
76
76
89
89
89
76
76
100
100
100
100
108
108
108
108
87
87
121
87

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.

A15-226

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

PCD

L1
B1

d1

d2

60

dc d Dg6

D1 dp

A
(Greasing hole)

BNF
Unit: mm

Nut dimensions
Overall
length
H
11
11
11
12
12
12
12
12
12
12
12
12
12
12
12
12
15
15
15
15
15
15
15
15
15
15
18
15

B1
49
33
37
29
41
51
44
59
35
40
50
33
45
51
41
49
43
56
72
67
55
72
65
85
65
75
80
83

B2

10
10

10
10
10

10
10

15
20

25

PCD
67
63
63
71
71
71
71
71
63
63
63
75
75
75
63
63
82
82
82
82
90
90
90
90
69
69
98
69

d1
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
9
9
9
9
9
9
9
9
9
9
11
9

d2
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
14
14
14
14
14
14
14
14
14
14
17.5
14

h
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
8.5
11
8.5

Tw

59
59

59
59
59

59
59

66
66

66

Nut
mass

Shaft
mass

kgcm2/mm
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3
8.0810-3

kg
0.81
0.44
0.47
0.76
0.91
1.03
0.94
1.13
0.5
0.53
0.6
0.94
1.12
1.21
0.58
0.65
1.5
1.73
2.02
1.93
2.2
2.6
2.44
2.92
1.22
1.34
3.4
1.43

kg/m
5.86
5.86
5.86
5.67
5.67
5.67
5.67
5.67
5.67
5.67
5.67
5.47
5.47
5.47
6.31
6.31
5.39
5.39
5.39
5.39
4.98
4.98
4.98
4.98
4.98
4.98
4.9
5.2

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

For model number coding, see A15-248.

OptionsA15-349

A15-227

Ball Screw

L1
60
44
48
41
53
63
56
71
47
52
62
45
57
63
53
61
58
71
87
82
70
87
80
100
80
90
98
98

Screw shaft
inertial
Greasing moment/mm
hole

502E

No Preload Type of Precision

Ball Screw

H
h

PCD
d2

A
(Greasing hole)

60

Screw shaft
outer diameter

32 to 36

Lead

6 to 36

L1
B1
d1

D1 dp

dc d Dg6

BNF

Screw Lead
shaft
outer
diameter
d
Ph
32

32

36

10

12
16
20
24
36

Model No.

BLK
BLK
BNF
BNF
BNF
BNF
BNF
BNF
BNF
BNF
BNF
BNF
DK
DK
BNF
BNF
BNF
BNF
BLK
BLK
BLK
BLK

3232-2.8
3232-3.6
3606-2.5
3606-3
3606-5
3606-7.5
3608-2.5
3608-5
3608-7.5
3610-2.5
3610-5
3610-7.5
3610-3
3610-4
3612-2.5
3612-5
3616-2.5
3620-1.5
3620-5.6
3624-5.6
3636-2.8
3636-3.6

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C0a
diameter
dp
dc
Rows turns
kN
kN
33.25
28.3
12.8
17.3
41.4
33.25
28.3
21.8
23.7
59.5
36.75
33.2
12.5
10.7
31.8
36.75
33.2
21.5
12.5
38
36.75
33.2
22.5
19.4
63.4
36.75
33.2
32.5
27.5
95.2
37.25
31.6
12.5
18.8
47.5
37.25
31.6
22.5
34.1
95.1
37.25
31.6
32.5
48.3
142.1
37.75
30.5
12.5
27.6
63.3
37.75
30.5
22.5
50.1
126.4
37.75
30.5
32.5
71.1
190.1
37.75
30.5
31
28.8
63.8
37.75
30.5
41
36.8
85
38
30.1
12.5
32.1
71.4
38
30.1
22.5
58.4
142.1
38
30.1
12.5
32.1
71.4
37.75
30.5
11.5
17.6
38.3
37.75
31.2
22.8
54.9
134.3
38
30.7
22.8
63.8
151.9
37.4
31.7
12.8
22.4
54.1
37.4
31.7
21.8
30.8
78

Rigidity
K
N/m
340
440
310
370
610
890
330
650
950
350
680
990
350
470
350
690
350
220
760
770
390
490

Flange
Outer
diameter diameter
D
58
58
65
65
65
65
70
70
70
75
75
75
58
58
78
78
78
70
70
75
66
66

D1
92
92
100
100
100
100
114
114
114
120
120
120
98
98
123
123
123
103
110
115
106
106

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.
Large Lead Precision Ball Screw model BLK cannot be attached with seal.

A15-228

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

30

30

4- d1

Dg6

D1 dp

PCD

A
(Greasing hole)

BLK

Tw
22.5

L1
B1

H
h

d1

d2

Dg6

D1 dp

PCD

90

Unit: mm

B1
77
45
38
47
56
74
50
74
98
63
93
123
64
75
69
105
74
60
45
59
86
50

B2

15
20

PCD
74
74
82
82
82
82
92
92
92
98
98
98
77
77
100
100
100
85
90
94
85
85

d1
9
9
9
9
9
9
11
11
11
11
11
11
11
11
11
11
11
9
11
11
11
11

d2

14
14
14
14
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
17.5
14

8.5
8.5
8.5
8.5
11
11
11
11
11
11
11
11
11
11
11
8.5

Tw
68
68

75
75

80
86
76
76

N1
7.5
7.5

8.5
9
8.5
8.5

Screw shaft
inertial
Greasing moment/mm
hole

Nut
mass

Shaft
mass

kgcm2/mm
8.0810-3
8.0810-3
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2
1.2910-2

kg
1.78
1.32
1.29
1.43
1.57
1.85
2.11
2.57
3.03
2.75
3.45
4.15
1.52
1.66
3.14
4.07
3.27
1.91
2.23
3.05
2.61
1.93

kg/m
5.83
5.83
7.39
7.39
7.39
7.39
6.96
6.96
6.96
6.51
6.51
6.51
6.51
6.51
6.41
6.41
6.8
7.24
6.49
6.39
7.34
7.34

A
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6
M6

For model number coding, see A15-248.

OptionsA15-349

A15-229

Ball Screw

Overall
length
H
15
15
15
15
15
15
18
18
18
18
18
18
18
18
18
18
18
15
17
18
17
17

dc d

B2

DK
Nut dimensions

L1
102
70
53
62
71
89
68
92
116
81
111
141
82
93
87
123
92
75
78
94
113
77

dc d

N1

Tw

A
(Greasing hole)

L1
B1

502E

No Preload Type of Precision

Ball Screw

H
h

PCD

Screw shaft
outer diameter

40

Lead

5 to 10

L1
B1

d1

d2

dc d Dg6

D1 dp

60
A
(Greasing hole)

BNF

Screw Lead
shaft
outer
diameter
d
Ph

Model No.

BNF 4005-3
5

40

10

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C 0a
diameter
dp
dc
Rows turns
kN
kN
40.75
37.2
21.5
13
42.3

Rigidity
K
N/m
400

Flange
Outer
diameter diameter
D
67

D1
101

BNF 4005-4.5

40.75

37.2

31.5

18.5

63.5

600

67

101

BNF 4005-6

40.75

37.2

41.5

23.7

84.7

780

67

101

BNF 4006-2.5

41

36.4

12.5

15.3

44.1

350

70

104

BNF 4006-5

41

36.4

22.5

27.7

88.1

690

70

104

BNF 4006-7.5

41

36.4

32.5

39.2

132.3

1010

70

104

BNF 4008-2.5

41.25

35.5

12.5

19.6

52.8

360

74

108

BNF 4008-3

41.25

35.5

21.5

22.9

63.4

430

74

108

BNF 4008-5

41.25

35.5

22.5

35.7

105.8

710

74

108

BNF 4010-2.5

41.75

34.4

12.5

29

70.4

380

82

124

BNF 4010-3

41.75

34.4

21.5

33.8

84.5

450

82

124

BNF 4010-3.5

41.75

34.4

13.5

38.8

99

520

82

124

BNF 4010-5

41.75

34.4

22.5

52.7

141.1

740

82

124

DK

4010-3

41.75

34.4

31

29.8

69.3

380

62

104

DK

4010-4

41.75

34.4

41

38.1

92.4

500

62

104

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
These models can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.

A15-230

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

Tw
22.5

L1
B1

H
h

A
(Greasing hole)

d2

d1
Dg6
dc d

D1 dp

PCD

90

B2
DK

Unit: mm

Nut dimensions

Nut
mass

Shaft
mass

L1
56

H
15

B1
41

B2

PCD
83

d1
9

d2
14

h
8.5

Tw

A
M6

kgcm2/mm
1.9710-2

kg
1.31

kg/m
9.06

66

15

51

83

14

8.5

M6

1.9710-2

1.46

9.06

81

15

66

83

14

8.5

M6

1.9710-2

1.69

9.06

48

15

33

86

14

8.5

M6

1.9710-2

1.32

8.82

66

15

51

86

14

8.5

M6

1.9710-2

1.63

8.82

84

15

69

86

14

8.5

M6

1.9710-2

1.94

8.82

58

15

43

90

14

8.5

M6

1.9710-2

1.7

8.72

71

15

56

90

14

8.5

M6

1.9710-2

1.97

8.72

82

15

67

90

14

8.5

M6

1.9710-2

2.19

8.72

73

18

55

102

11

17.5

11

M6

1.9710-2

2.86

8.22

90

18

72

102

11

17.5

11

M6

1.9710-2

3.33

8.22

83

18

65

102

11

17.5

11

M6

1.9710-2

3.14

8.22

103

18

85

102

11

17.5

11

M6

1.9710-2

3.69

8.22

83

18

65

15

82

11

17.5

11

79

PT 1/8

1.97102

3.14

8.22

93

18

75

20

82

11

17.5

11

79

PT 1/8

1.97102

3.41

8.22

For model number coding, see A15-248.

OptionsA15-349

A15-231

Ball Screw

Overall
length

Screw shaft
inertial
Greasing moment/mm
hole

502E

No Preload Type of Precision

Ball Screw

H
h

PCD

Screw shaft
outer diameter

40

Lead

12 to 40

L1
B1

d1

d2

dc d Dg6

D1 dp

60
A
(Greasing hole)

BNF

Screw Lead
shaft
outer
diameter
d
Ph

Model No.

BNF 4012-2.5
12

40
16
20

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C0a
diameter
dp
dc
Rows turns
kN
kN
42
34.1
12.5
33.9
79.2

Rigidity
K
N/m
390

Outer
Flange
diameter diameter
D
84

D1
126

BNF 4012-3.5

42

34.1

13.5

45.4

110.7

530

84

126

BNF 4012-5

42

34.1

22.5

61.6

158.3

750

84

126

DK

4012-3

41.75

34.4

31

30.6

72.3

390

62

104

DK

4012-4

41.75

34.4

41

39.2

96.4

520

62

104

42

34.1

22.5

61.4

158.8

740

84

126

41.75

34.4

41

39.1

96.8

520

62

104

BNF 4016-5
DK

4016-4

DK

4020-3

40

41.75

34.7

31

29.4

69.3

750

62

104

BLK 4040-2.8

41.75

35.2

12.8

28.2

68.9

430

73

114

BLK 4040-3.6

41.75

35.2

21.8

38.7

99.2

550

73

114

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.
Large Lead Precision Ball Screw model BLK cannot be attached with seal.

A15-232

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

Tw
22.5

L1
B1

H
h

A
(Greasing hole)

d2

d1
Dg6
dc d

D1 dp

PCD

90

B2
DK

30

30

L1
B1

4- d1

Dg6

D1 dp

PCD

dc d

N1

Tw
BLK

Unit: mm

Nut dimensions
Overall
length

Screw shaft
inertial
Greasing moment/mm
hole

Nut
mass

Shaft
mass

L1
83

H
18

B1
65

B2

PCD
104

d1
11

d2
17.5

h
11

Tw

N1

A
M6

kgcm2/mm
1.9710-2

kg
3.31

kg/m
8.12

95

18

77

104

11

17.5

11

M6

1.9710-2

3.66

8.12

119

18

101

104

11

17.5

11

M6

1.9710-2

4.36

8.12

90

18

72

20

82

11

17.5

11

79

PT 1/8

1.97102

1.77

8.5

103

18

85

25

82

11

17.5

11

79

PT 1/8

1.97102

1.95

8.5

152

22

130

104

11

17.5

11

M6

1.9710-2

5.52

8.55

120

18

102

30

82

11

17.5

11

79

PT 1/8

1.97102

2.19

8.83

123

18

105

30

82

11

17.5

11

79

PT 1/8

1.97102

2.23

9.03

125

17

96.5

93

11

84

8.5

M6

1.9710-2

3.4

9.01

85

17

56.5

93

11

84

8.5

M6

1.9710-2

2.48

9.01

For model number coding, see A15-248.

OptionsA15-349

A15-233

Ball Screw

A
(Greasing hole)

502E

No Preload Type of Precision

Ball Screw

30

30

40

80

8
45
10

Model No.

WGF 4080-1
WGF 4080-3

Lead

6 to 80

L1
B1

Dg6

D1 dp

Screw Lead
shaft
outer
diameter
d
Ph

40 to 45

4- d1

PCD

Tw

Screw shaft
outer diameter

A
(Greasing hole) WGF

dc d

N1

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C 0a
diameter
dp
dc
Rows turns
kN
kN
41.75
35.2
20.65
15
32.1

Rigidity
K
N/m
220

Flange
Outer
diameter diameter
D
73

D1
114

41.75

35.2

21.65

33.4

81.4

530

73

114

BNF 4506A-2.5

46

41.4

12.5

16

49.6

390

80

114

BNF 4506A-5

46

41.4

22.5

29

99

750

80

114

BNF 4506A-7.5

46

41.4

32.5

41.2

150

1100

80

114

BNF 4508-2.5

46.25

40.6

12.5

20.7

59.5

400

85

127

BNF 4508-5

46.25

40.6

22.5

37.4

118.6

770

85

127

BNF 4508-7.5

46.25

40.6

32.5

53.1

178.4

1140

85

127

BNF 4510-2.5

46.75

39.5

12.5

30.7

79.3

420

88

132

BNF 4510-3

46.75

39.5

21.5

35.9

95.2

500

88

132

BNF 4510-5

46.75

39.5

22.5

55.6

158.8

800

88

132

BNF 4510-7.5

46.75

39.5

32.5

78.8

238.1

1190

88

132

47

39.2

22.5

65.2

178.4

820

90

130

47.7

37.9

11.5

44.2

99

350

98

142

12

BNF 4512-5

20

BNF 4520-1.5

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.
Model WGF cannot be attached with seal.

A15-234

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

PCD

L1
B1

d1

d2

60

dc d Dg6

D1 dp

A
(Greasing hole)

BNF

Unit: mm

Overall
length

Screw shaft
inertial
Greasing moment/mm
hole

Nut
mass

Shaft
mass
kg/m
9.38

L1
79

H
17

B1
50.5

PCD
93

d1
11

d2

Tw
74

N1
8.5

A
M6

kgcm2/mm
1.9710-2

kg
2.34

159

17

130.5

93

11

74

8.5

M6

1.9710-2

4.18

9.38

53

15

38

96

14

8.5

PT 1/8

3.1610-2

1.76

11.31

71

15

56

96

14

8.5

PT 1/8

3.1610-2

2.18

11.31

89

15

74

96

14

8.5

PT 1/8

3.1610-2

2.59

11.31

68

18

50

105

11

17.5

11

PT 1/8

3.1610-2

2.76

11.21

92

18

74

105

11

17.5

11

PT 1/8

3.1610-2

3.42

11.21

116

18

98

105

11

17.5

11

PT 1/8

3.1610-2

4.09

11.21

81

18

63

110

11

17.5

11

PT 1/8

3.1610-2

3.43

10.65

94

18

76

110

11

17.5

11

PT 1/8

3.1610-2

3.83

10.65

111

18

93

110

11

17.5

11

PT 1/8

3.1610-2

4.35

10.65

141

18

123

110

11

17.5

11

PT 1/8

3.1610-2

5.26

10.65

119

18

101

110

11

17.5

11

PT 1/8

3.1610-2

4.74

10.54

95

20

75

120

11

17.5

11

PT 1/8

3.1610-2

5.04

10.37

For model number coding, see A15-248.

OptionsA15-349

A15-235

Ball Screw

Nut dimensions

502E

No Preload Type of Precision

Ball Screw

Screw shaft
outer diameter

50

Lead

5 to 10

Tw
22.5

L1
B1

H
h

A
(Greasing hole)

d2

d1
Dg6
dc d

D1 dp

PCD

90

B2
DK

Screw Lead
shaft
outer
Model No.
diameter
d
Ph
5 BNF 5005-4.5
8

50
10

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C0a
diameter
dp
dc
Rows turns
kN
kN
50.75
47.2
31.5
20.2
79.5

Rigidity
K

Outer
Flange
diameter diameter

N/m
710

D
80

D1
114

BNF 5008-2.5

51.25

45.5

12.5

21.6

66.2

430

87

129

BNF 5008-5

51.25

45.5

22.5

39.1

132.3

840

87

129
129

BNF 5008-7.5

51.25

45.5

32.5

55.4

198.9

1230

87

BNF 5010-2.5

51.75

44.4

12.5

32

88.2

450

93

135

BNF 5010-3

51.75

44.4

21.5

37.5

105.8

540

93

135

BNF 5010-3.5

51.75

44.4

13.5

42.8

123.5

620

93

135

BNF 5010-5

51.75

44.4

22.5

58.2

176.4

880

93

135

51.75

44.4

32.5

82.5

264.6

1290

93

135

51.75

44.4

31

33.9

90.7

470

72

123

BNF 5010-7.5
DK

5010-3

DK

5010-4

51.75

44.4

41

43.4

120.5

610

72

123

DK

5010-6

51.75

44.4

61

62.7

186.8

930

72

123

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.

A15-236

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

PCD

d1

d2

60

L1
B1

dc d Dg6

D1 dp

A
(Greasing hole)

BNF

Unit: mm

Overall
length

Screw shaft
inertial
Greasing moment/mm
hole

Nut
mass

Shaft
mass

L1
68

H
15

B1
53

B2

PCD
96

d1
9

d2
14

h
8.5

Tw

A
PT 1/8

kgcm2/mm
4.8210-2

kg
1.91

kg/m
14.4

61

18

43

107

11

17.5

11

PT 1/8

4.8210-2

2.52

14.0

85

18

67

107

11

17.5

11

PT 1/8

4.8210-2

3.16

14.0

109

18

91

107

11

17.5

11

PT 1/8

4.8210-2

3.8

14.0

73

18

55

113

11

17.5

11

PT 1/8

4.8210-2

3.33

13.38

90

18

72

113

11

17.5

11

PT 1/8

4.8210-2

3.88

13.38

83

18

65

113

11

17.5

11

PT 1/8

4.8210-2

3.66

13.38

103

18

85

113

11

17.5

11

PT 1/8

4.8210-2

4.31

13.38

133

18

115

113

11

17.5

11

PT 1/8

4.8210-2

5.28

13.38

83

18

65

15

101

11

17.5

11

92

PT 1/8

4.82102

2.14

13.38

93

18

75

20

101

11

17.5

11

92

PT 1/8

4.82102

2.3

13.38

114

18

96

30

101

11

17.5

11

92

PT 1/8

4.82102

2.65

13.38

For model number coding, see A15-248.

OptionsA15-349

A15-237

Ball Screw

Nut dimensions

502E

No Preload Type of Precision

Ball Screw

H
h

PCD

Screw shaft
outer diameter

50

Lead

12 to 50

L1
B1

d1

d2

dc d Dg6

D1 dp

60
A
(Greasing hole)

BNF

Screw Lead
shaft
outer
diameter
d
Ph

12

50

16

20

Model No.

DK

5012-3

DK

5012-4

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C0a
diameter
dp
dc
Rows turns
kN
kN
52.25
43.3
31
45.8
113

Rigidity
K
N/m
490

Outer
Flange
diameter diameter
D
75

D1
129

52.25

43.3

41

58.6

150.6

640

75

129

BNF 5012-2.5

52.25

43.3

12.5

43.4

109.8

470

100

146

BNF 5012-3.5

52.25

43.3

13.5

58

153.9

640

100

146

BNF 5012-5

52.25

43.3

22.5

78.8

220.5

910

100

146

DK

5016-3

52.25

43.3

31

45.7

113.3

490

75

129

DK

5016-4

52.25

43.3

41

58.5

151

640

75

129

BNF 5016-2.5

52.7

42.9

12.5

72.6

183.3

620

105

152

BNF 5016-5

52.7

42.9

22.5

132.3

366.5

1180

105

152

52.25

43.6

31

44.2

108.8

470

75

129

BNF 5020-2.5

52.7

42.9

12.5

72.5

183.3

620

105

152

BLK 5050-2.8

52.2

44.1

12.8

42.2

107.8

530

90

135

BLK 5050-3.6

52.2

44.1

21.8

57.8

155

670

90

135

DK

50

5020-3

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Those models marked with can be attached with QZ Lubricator or the wiper ring.
For dimensions of the ball screw nut with either accessory being attached, see A15-358.
Large Lead Precision Ball Screw model BLK cannot be attached with seal.

A15-238

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

Tw
22.5

L1
B1

H
h

A
(Greasing hole)

d2

d1
Dg6
dc d

D1 dp

PCD

90

B2
DK

30

30

L1
B1

4- d1

Dg6

D1 dp

PCD

dc d

N1

Tw
BLK

Unit: mm

Nut dimensions
Overall
length

Screw shaft
inertial
Greasing moment/mm
hole

Nut
mass

Shaft
mass

kg
2.91

kg/m
12.74

L1
97

H
22

B1
75

B2
20

PCD
105

d1
14

d2
20

h
13

Tw
98

N1

A
PT 1/8

kgcm2/mm
4.82102

110

22

88

25

105

14

20

13

98

PT 1/8

4.82102

3.16

12.74

87

22

65

122

14

20

13

PT 1/8

4.8210-2

4.57

12.74

99

22

77

122

14

20

13

PT 1/8

4.8210-2

5.05

12.74

123

22

101

122

14

20

13

PT 1/8

4.8210-2

6.02

12.74

111

22

89

25

105

14

20

13

98

PT 1/8

4.82102

3.18

13.41

129

22

107

30

105

14

20

13

98

PT 1/8

4.82102

3.52

13.41

116

25

91

128

14

20

13

PT 1/8

4.8210-2

6.98

12.5

164

25

139

128

14

20

13

PT 1/8

4.8210-2

9.18

12.5

136

28

108

30

105

14

20

13

98

PT 1/8

4.82102

3.94

13.8

141

28

113

128

14

20

13

PT 1/8

4.8210-2

8.32

13.08

156

20

122

112

14

104

10

M6

4.8210-2

6.18

14.08

106

20

72

112

14

104

10

M6

4.8210-2

4.45

14.08

For model number coding, see A15-248.

OptionsA15-349

A15-239

Ball Screw

A
(Greasing hole)

502E

No Preload Type of Precision

Ball Screw

30

30

50 to 55

Lead

10 to 100

L1
B1

4- d1

Dg6

D1 dp

PCD

Tw

Screw shaft
outer diameter

A
(Greasing hole)

dc d

N1
WGF

Screw Lead
shaft
outer
diameter
d
Ph
50

100

10

55

12

16
20

Model No.

WGF 50100-1

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C 0a
diameter
dp
dc
Rows turns
kN
kN
52.2
44.1
20.65
22.4
50.1

Rigidity
K
N/m
270

Flange
Outer
diameter diameter
D
90

D1
135

WGF 50100-3

52.2

44.1

21.65

49.9

127.2

650

90

135

BNF 5510-2.5

56.75

49.5

12.5

33.4

97

490

102

144

BNF 5510-5

56.75

49.5

22.5

60.7

194

950

102

144

BNF 5510-7.5

56.75

49.5

32.5

85.9

291.1

1390

102

144

BNF 5512-2.5

57

49.2

12.5

39.3

108.8

500

105

147

BNF 5512-3

57

49.2

21.5

46

131.3

590

105

147

BNF 5512-3.5

57

49.2

13.5

52.4

152.9

680

105

147

BNF 5512-5

57

49.2

22.5

71.3

218.5

960

105

147

BNF 5512-7.5

57

49.2

32.5

100.9

327.3

1420

105

147

BNF 5516-2.5

57.7

47.9

12.5

76.1

201.9

650

110

158

BNF 5516-5

57.7

47.9

22.5

138.2

402.8

1280

110

158

BNF 5520-2.5

57.7

47.9

12.5

76

201.9

660

112

158

BNF 5520-5

57.7

47.9

22.5

138.2

403.8

1280

112

158

Note) The model numbers in dimmed type indicate semi-standard types. If desiring them, contact THK.
Model WGF cannot be attached with seal.

A15-240

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

PCD

L1
B1

d1

d2

60

dc d Dg6

D1 dp

A
(Greasing hole)

BNF

Unit: mm

Nut dimensions

L1
98

H
20

B1
64

PCD
112

d1
14

198

20

81

18

164

112

14

63

122

11

111

18

93

122

11

141

18

123

122

93

18

75

107

18

105

d2

Nut
mass

Shaft
mass

kgcm2/mm
4.8210-2

kg
4.18

kg/m
14.66

Tw
92

N1
10

A
M6

92

10

M6

4.8210-2

7.63

14.66

17.5

11

PT 1/8

7.0510-2

4.19

16.43

17.5

11

PT 1/8

7.0510-2

5.36

16.43

11

17.5

11

PT 1/8

7.0510-2

6.54

16.43

125

11

17.5

11

PT 1/8

7.0510-2

5.01

16.29

89

125

11

17.5

11

PT 1/8

7.0510-2

5.6

16.29

18

87

125

11

17.5

11

PT 1/8

7.0510-2

5.52

16.29

129

18

111

125

11

17.5

11

PT 1/8

7.0510-2

6.54

16.29

165

18

147

125

11

17.5

11

PT 1/8

7.0510-2

8.07

16.29

116

25

91

133

14

20

13

PT 1/8

7.0510-2

7.4

15.46

164

25

139

133

14

20

13

PT 1/8

7.0510-2

9.73

15.46

127

28

99

134

14

20

13

PT 1/8

7.0510-2

8.4

16.1

187

28

159

134

14

20

13

PT 1/8

7.0510-2

11.45

16.1

For model number coding, see A15-248.

OptionsA15-349

A15-241

Ball Screw

Overall
length

Screw shaft
inertial
Greasing moment/mm
hole

502E

No Preload Type of Precision

Ball Screw

H
h

PCD

Screw shaft
outer diameter

63

Lead

10 to 20

L1
B1

d1

d2

dc d Dg6

D1 dp

60
A
(Greasing hole)

BNF

Screw Lead
shaft
outer
diameter
d
Ph

Model No.

BNF 6310-2.5
10

63

12

Ball
Thread No. of Basic load rating
center- minor
loaded
to-center diameter circuits
Ca
C 0a
diameter
dp
dc
Rows turns
kN
kN
64.75
57.7
12.5
35.4
111.7

Rigidity
K
N/m
550

Flange
Outer
diameter diameter
D
108

D1
154

BNF 6310-5

64.75

57.7

22.5

64.2

222.5

1050

108

154

BNF 6310-7.5

64.75

57.7

32.5

90.9

334.2

1550

108

154
146

DK

6310-4

64.75

57.7

41

49.5

160.7

780

85

DK

6310-6

64.75

57.7

61

70.3

242.1

1140

85

146

BNF 6312A-2.5

65.25

56.3

12.5

48.1

139.2

560

115

161

BNF 6312A-5

65.25

56.3

22.5

87.4

278.3

1090

115

161

DK

6312-3

65.25

56.3

31

51.9

147.4

600

90

146

DK

6312-4

65.25

56.3

41

66.4

196.6

785

90

146

16

BNF 6316-5

65.7

55.9

22.5

147

462.6

1420

122

184

BNF 6320-2.5

65.7

55.9

12.5

81

231.3

740

122

180

20

BNF 6320-5

65.7

55.9

22.5

147

463.5

1420

122

180

DK

65.7

55.9

31

83.5

229.3

1470

95

159

6320-3

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.

A15-242

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

Tw
22.5

L1
B1

H
h

A
(Greasing hole)

d2

d1
Dg6
dc d

D1 dp

PCD

90

B2
DK

Unit: mm

Nut dimensions

Nut
mass

Shaft
mass

B1
55

B2

PCD
130

d1
14

d2
20

h
13

Tw

A
PT 1/8

kgcm2/mm
1.21101

kg
4.57

kg/m
21.93

22

85

130

14

20

13

PT 1/8

1.21101

5.77

21.93

22

115

130

14

20

13

PT 1/8

1.21101

6.98

21.93

97

22

75

20

122

14

20

13

110

PT 1/8

1.21101

3.28

21.93

118

22

96

30

122

14

20

13

110

PT 1/8

1.21101

3.7

21.93

87

22

65

137

14

20

13

PT 1/8

1.21101

5.8

21.14

123

22

101

137

14

20

13

PT 1/8

1.21101

7.56

21.14

98

22

76

20

122

14

20

13

110

PT 1/8

1.21101

3.71

21.14

111

22

89

25

122

14

20

13

110

PT 1/8

1.21101

4.04

21.14

160

24

136

152

18

26

17.5

PT 1/8

1.21101

11.82

20.85

127

28

99

150

18

26

17.5

PT 1/8

1.21101

10.1

21.57

187

28

159

150

18

26

17.5

PT 1/8

1.21101

13.58

21.57

136

28

108

30

129

18

26

17.5

121

PT 1/8

1.21101

6.17

21.57

L1
77

H
22

107
137

For model number coding, see A15-248.

OptionsA15-349

A15-243

Ball Screw

Overall
length

Screw shaft
inertial
Greasing moment/mm
hole

502E

No Preload Type of Precision

Ball Screw

Screw shaft
outer diameter

70 to 100

Lead

10 to 20

PCD

60
A
(Greasing hole)

BNF

Screw Lead
shaft
outer
diameter
d
Ph

Model No.

BNF 7010-2.5
10
70
12
20
10
80
20

100

20

Ball
Thread No. of Basic load rating
centerminor
loaded
to-center diameter circuits
Ca
C 0a
diameter
Rows turns
kN
kN
dp
dc
71.75
64.5
12.5
36.8
123.5

Rigidity
K
N/m
590

Outer
Flange
diameter diameter
D
125

D1
167

BNF 7010-5

71.75

64.5

22.5

66.9

247

1140

125

167

BNF 7010-7.5

71.75

64.5

32.5

94.9

371.4

1680

125

167
170

BNF 7012-2.5

72

64.2

12.5

43.5

139.2

600

128

BNF 7012-5

72

64.2

22.5

78.9

278.3

1160

128

170

BNF 7012-7.5

72

64.2

32.5

111.7

417.5

1710

128

170

BNF 7020-5

72.7

62.9

22.5

153.9

514.5

1550

130

186

BNF 8010-2.5

81.75

75.2

12.5

38.9

141.1

650

130

176

BNF 8010-5

81.75

75.2

22.5

70.6

283.2

1270

130

176

BNF 8010-7.5

81.75

75.2

32.5

100

424.3

1860

130

176

BNF 8020A-2.5

82.7

72.9

12.5

90.1

294

890

143

204

BNF 8020A-5

82.7

72.9

22.5

163.7

589

1720

143

204
204

BNF 8020A-7.5

82.7

72.9

32.5

231.6

883.2

2520

143

BNF 10020A-2.5

102.7

92.9

12.5

99

368.5

2110

170

243

BNF 10020A-5

102.7

92.9

22.5

179.3

737

4080

170

243

BNF 10020A-7.5

102.7

92.9

32.5

253.8

1105.4

6010

170

243

Note) The model numbers in dimmed type indicate semi-standard types.

If desiring them, contact THK.

A15-244

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

H
h

L1
B1

d1

d2

dc d Dg6

D1 dp

BNF

Unit: mm

Nut dimensions
Greasing
hole

L1
81

H
18

Nut
mass

Shaft
mass

B1
63

PCD
145

d1
11

d2
17.5

h
11

A
PT 1/8

kgcm2/mm
1.8510-1

kg
5.8

kg/m
27.4
27.4

111

18

93

145

11

17.5

11

PT 1/8

1.8510-1

7.49

141

18

123

145

11

17.5

11

PT 1/8

1.8510-1

9.19

27.4

93

18

75

148

11

17.5

11

PT 1/8

1.8510-1

6.89

27.24

129

18

111

148

11

17.5

11

PT 1/8

1.8510-1

9.08

27.24

165

18

147

148

11

17.5

11

PT 1/8

1.8510-1

11.26

27.24

185

28

157

158

18

26

17.5

PT 1/8

1.8510-1

14.5

27.0

77

22

55

152

14

20

13

PT 1/8

3.1610-1

5.9

36.26

107

22

85

152

14

20

13

PT 1/8

3.1610-1

7.53

36.26

137

22

115

152

14

20

13

PT 1/8

3.1610-1

9.15

36.26

127

28

99

172

18

26

17.5

PT 1/8

3.1610-1

12.68

35.81

187

28

159

172

18

26

17.5

PT 1/8

3.1610-1

17.12

35.81

247

28

219

172

18

26

17.5

PT 1/8

3.1610-1

21.56

35.81

131

32

99

205

22

32

21.5

PT 1/8

7.7110-1

18.28

57.13

191

32

159

205

22

32

21.5

PT 1/8

7.7110-1

24.2

57.13

251

32

219

205

22

32

21.5

PT 1/8

7.7110-1

30.12

57.13

For model number coding, see A15-248.

OptionsA15-349

A15-245

Ball Screw

Overall
length

Screw shaft
inertial
moment/mm

502E

No Preload Type of Precision

Ball Screw (Square Nut)

Screw shaft
outer diameter

14 to 45

Lead

4 to 12

W
B
W1

4-S

T
F
M
MAX

N2
A
(Greasing hole)

BNT

Screw
shaft
outer
diameter
d
14

Lead
Model No.
Ph
4

16
18
20
25

BNT 1404-3.6

Ball
centerto-center
diameter
dp
14.4

Thread
minor
diameter

No. of
loaded
circuits

dc
11.5

Rows turns
13.65

Basic load rating

Rigidity

Ca

C0a

kN
6.8

kN
12.6

N/m
190

BNT 1405-2.6

14.5

11.2

12.65

7.2

12.6

150

BNT 1605-2.6

16.75

13.5

12.65

7.8

14.7

170

BNT 1808-3.6

19.3

14.4

13.65

18.2

34.4

270

BNT 2005-2.6

20.5

17.2

12.65

8.7

18.3

200

10

BNT 2010-2.6

21.25

16.4

12.65

14.7

27.8

220

BNT 2505-2.6

25.5

22.2

12.65

9.6

23

240
520

10

28

32

10

36

10

45

12

A15-246

BNT 2510-5.3

26.8

20.2

22.65

43.4

92.8

BNT 2806-2.6

28.5

25.2

12.65

10.1

25.8

270

BNT 2806-5.3

28.5

25.2

22.65

18.3

51.6

510

BNT 3210-2.6

33.75

27.2

12.65

27.3

59.5

330

BNT 3210-5.3

33.75

27.2

22.65

49.6

118.9

640

BNT 3610-2.6

37

30.5

12.65

28.7

65.6

360

BNT 3610-5.3

37

30.5

22.65

52.1

131.2

700

BNT 4512-5.3

46.5

39.2

22.65

68.1

186.7

860

To download a desired data, search for

the corresponding model number in the Technical site.

https://tech.thk.com

502E

Precision Ball Screw

L1
C

dc d

dp

N1
BNT

Unit: mm

Nut dimensions
Center Overall
height length

Greasing
hole

Mounting hole

Nut
mass

Shaft
mass
kg/m
0.93

W
34

F
13

L1
35

B
26

C
22

S
M47

W1
17

T
6

M
30

N1
6

N2
2

A
M6

kgcm2/mm
2.9610-4

kg
0.15

34

13

35

26

22

M47

17

31

M6

2.9610-4

0.15

0.92

42

16

36

32

22

M58

21

M6

5.0510-4

0.3

1.24

48

17

56

35

35

M610

24

10

44

M6

8.0910-4

0.47

1.46

48

17

35

35

22

M610

24

39

M6

1.2310-3

0.28

2.06

48

18

58

35

35

M610

24

46

10

M6

1.2310-3

0.5

1.99

60

20

35

40

22

M812

30

9.5

45

M6

3.0110-3

0.41

3.35

60

23

94

40

60

M812

30

10

55

10

M6

3.0110-3

1.18

2.79

60

22

42

40

18

M812

30

10

50

M6

4.7410-3

0.81

4.42

60

22

67

40

40

M812

30

10

50

M6

4.7410-3

0.78

4.42

70

26

64

50

45

M812

35

12

62

10

M6

8.0810-3

1.3

4.98

70

26

94

50

60

M812

35

12

62

10

M6

8.0810-3

2.0

4.98

86

29

64

60

45

M1016

43

17

67

11

M6

1.2910-2

1.8

6.54

86

29

96

60

60

M1016

43

17

67

11

M6

1.2910-2

2.4

6.54

100

36

115

75

75

M1220

50

20.5

80

13

M6

3.1610-2

4.1

10.56

21.5 32.5

For model number coding, see A15-248.

OptionsA15-349

A15-247

Ball Screw

Width

Screw shaft
inertial
moment/mm

502E

Model Number Coding

Model number coding

BIF 25 05 L -5 RR G0 + 620L C5 A
Model
number

Standard Ball Screw assembly

A,B: Unfinished Shaft Ends
Y: Finished Shaft Ends

Accuracy symbol
Overall screw shaft length (in mm)
Symbol for clearance in the axial direction
Seal symbol
(Labyrinth seal attached to both ends)
No. of circuits (Rows turns)
Threading direction
No symbol: right-hand thread L: left-hand thread
RL: Right and left hand thread

Lead (in mm)

Screw shaft outer diameter (in mm)

A15-248

502E

Precision Ball Screw

Ball Screw

A15-249