Scribd
Upload
19 views

CE 322 Assignment # 12 (Two-Way Slab) Date 10/04/10: Parameters

(1) Design a simply supported two-way slab with dimensions 4m x 5m carrying a live load of 2.38 kN/m^2 and topped with 20mm granolithic, using M20 concrete and Fe415 steel. (2) Design a discontinuous two-way slab with dimensions 5m x 6m carrying a superimposed load of 3kN/m^2, corners held down, using M20 concrete and Fe415 steel. (3) Design an isolated slab with inner dimensions 3m x 5m supported by 250mm beams and carrying a live load of 5kN/m^2, using M15 concrete and Fe415 steel.

Uploaded by

Amit Jain
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
19 views

CE 322 Assignment # 12 (Two-Way Slab) Date 10/04/10: Parameters

(1) Design a simply supported two-way slab with dimensions 4m x 5m carrying a live load of 2.38 kN/m^2 and topped with 20mm granolithic, using M20 concrete and Fe415 steel. (2) Design a discontinuous two-way slab with dimensions 5m x 6m carrying a superimposed load of 3kN/m^2, corners held down, using M20 concrete and Fe415 steel. (3) Design an isolated slab with inner dimensions 3m x 5m supported by 250mm beams and carrying a live load of 5kN/m^2, using M15 concrete and Fe415 steel.

Uploaded by

Amit Jain
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CE 322 Assignment # 12 (Two-way slab) Date 10/04/10

Note: Please refer to relevant section of IS: 456-2000 to determine values for different parameters.

(1) Design a R.C. slab for a room having effective dimensions 4m5m. The slab carries a live load of 2.38kN/m2 and is finished with 20mm thick granolithic topping. Assume the slab to be simply supported at all the four edges, with corners free to lift. Use M 20 concrete and Fe 415 steel. (2) Design a R.C. slab for a room having effective dimensions 5m6m. The slab carries a superimposed load of 3kN/m2. Assume the slab to be discontinuous at all the four edges, with corners held down. Use M 20 concrete and Fe 415 steel. (3) Design an isolated R.C. slab having inner dimensions along x and y as 3m and 5m, respectively and supported on 250mm beams. The live load (including floor finish) on the slab is 5kN/m2. Use M 15 concrete and Fe 415 steel.

You might also like