Scribd
Upload
58 views

MF86

The MF 86/88 is a low-cost training kit that can use either an 8086 or 8088 processor without changing the kit. It has 32KB of firmware ROM that is expandable to 128KB, 32KB of CMOS RAM expandable to 64KB, optional 512KB of DRAM, and supports I/O, serial communication, timers, and programming of EPROMs. The kit includes a keypad, LED display, terminal emulation software, assembler/disassembler, and debugging features in an attractive case with documentation and example programs.

Uploaded by

Nitin Tiwari
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
58 views

MF86

The MF 86/88 is a low-cost training kit that can use either an 8086 or 8088 processor without changing the kit. It has 32KB of firmware ROM that is expandable to 128KB, 32KB of CMOS RAM expandable to 64KB, optional 512KB of DRAM, and supports I/O, serial communication, timers, and programming of EPROMs. The kit includes a keypad, LED display, terminal emulation software, assembler/disassembler, and debugging features in an attractive case with documentation and example programs.

Uploaded by

Nitin Tiwari
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Microfriend MF 86/88 : 8086/88 Based Trainer Kit

MF 86/88 is low cost training & development kit with facility to change between the two processors without changing the kit. Following are brief specifications of the kit. Specifications: 8086 CPU @ 6 MHz (12 MHz crystal) with provision to changes to 8088 CPU. Socket Socket provided provided for for 8089 8087 I/O coprocessor processor Powerful 32 KB of firmware in ROM expandable to 128 KB 32 KB of CMOS Static RAM expandable to 64 KB Optionally 512 KB of DRAM using 41256 also possible. 96 parallel I/O lines from 4 nos. of 8255 PPI. RS333C serial I/O 8251 On-board Audio Cassette I/F. 16 bit timer using 8253. Buffered TTL compatible bus

On-board EPROM programmer with ZIF socket for programming 2716 to 27512 EPROM & various EEPROMS.

28 key multifunction keypad & 8 digit, 7 segment LED display using 8279.

Terminal Emulation Software to upload/download through IBM-PC provided with the kit.

Assembler/Dis-assembler facility for 8086/8088. Single step & breakpoint facility. Supplied in a strong and attractive lightweight wooden case. Detailed documentation with circuit diagrams and example programs. Ordering Information MF 86/88 : Microprocessor 8088/86 Based Entry Level Trainer Kit Accessories : SMPS-03 : Specially designed 230 V AC, 3A Switch Mode Power Supply CABCON : Full set of interfacing cables for MF-86/88

Corporate Office : Kailas Vaibhav, G-Wing, Park Site, Vikhroli (W), Mumba i- 400 079. Tel. : 022- 2518 1900 ( 16 lines ) Fax : 91 - 022 - 2518 1930 / 40 / 50 E-mail: [email protected] URL : www.dynalogindia.com

Educational Products Division : 203, Corporate Plaza, 106-A, S.B.Road, Shivaji Nagar, PUNE 411 016. Tel. : 020 - 2567 1081 Fax : 91 - 020-567 8333 E-mail : [email protected]

You might also like