Scribd
Upload
829 views1 page

Gate Valve, Manual

This document provides specifications for a 3-1/16"-10K flanged gate valve. It includes proprietary information noting the document belongs to Petrotrim Services. The valve must meet tolerances of +/-0.003" for true position, 0.005" for flatness and roundness, and +/-0.003" for concentricity. The surface finish must be 125 RMS minimum. The document also lists the modeled/approved date as 7/17/12 and includes the drawing number and scale.

Uploaded by

Petrotrim Services
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
829 views1 page

Gate Valve, Manual

This document provides specifications for a 3-1/16"-10K flanged gate valve. It includes proprietary information noting the document belongs to Petrotrim Services. The valve must meet tolerances of +/-0.003" for true position, 0.005" for flatness and roundness, and +/-0.003" for concentricity. The surface finish must be 125 RMS minimum. The document also lists the modeled/approved date as 7/17/12 and includes the drawing number and scale.

Uploaded by

Petrotrim Services
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BY:

REV.

ECR

DESCRIPTION REVISION/CHANGES

DATE

UNSPECIFIED TOLERANCES
PROPRIETARY CONFIDENTIAL INFORMATION: THIS DOCUMENT IS THE EXCLUSIVE PROPERTY OF PETROTRIM SERVICES AND IS NOT TO BE COPIED OR TRANSFERRED TO OTHER PARTIES WITHOUT THE APPROVAL OF PETROTRIM SERVICES.
MODELED/APPROVAL

DO NOT SCALE DRAWING

TRUE POSITION :.003 TIR FLATNESS: .005 TIR ROUNDNESS: .005 TIR CONCENTRICITY: .003 TIR SURFACE FINISH 125 RMS MIN

MODELED

SEE BOM AND DWG REQUIREMENTS.

FOR MATERIAL AND SPECIAL

J.A.BECK
APPROVED

7/17/12 7/17/12
SIZE

ASSEMBLE DETAILS 3-1/16"-10K FLG X FLG MANUAL GATE VALVE TYPE FLS
DRAWING NUMBER CUSTOMER: IF REQD REVISION

K.GOSS
3RD PARTY NOTES:

SCALE: 0.160

FG-0255
WEIGHT: 524.312

A
SHEET 1 OF 1

You might also like