Scribd
Upload
892 views

Dispensing and Sampling Booth

The document describes a dispensing and sampling booth that is designed to provide controlled air flow for operator, product, and environmental protection during powder dispensing and sampling processes. The booth uses a 0.3 micron downward air stream to deflect airborne dust away from the operator's breathing zone during handling operations. Dust particles are filtered at three levels prior to the air being recirculated into the booth's air stream. The booth is used for filling, refilling, weighing, and sampling of raw materials and components.

Uploaded by

Ahlada Group of Companies
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
892 views

Dispensing and Sampling Booth

The document describes a dispensing and sampling booth that is designed to provide controlled air flow for operator, product, and environmental protection during powder dispensing and sampling processes. The booth uses a 0.3 micron downward air stream to deflect airborne dust away from the operator's breathing zone during handling operations. Dust particles are filtered at three levels prior to the air being recirculated into the booth's air stream. The booth is used for filling, refilling, weighing, and sampling of raw materials and components.

Uploaded by

Ahlada Group of Companies
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Dispensing and Sampling booth

Booths are designed to give mixed air flow stream for product, operator
and environmental protection and used to control the hazardous
emissions of dust powder during powder dispensing / sampling process.

0.3 micron downward air stream deflects air-borne dust away from the
operator breathing zone which is caused in handling operation. Dust
particle available is being filtered at three levels of filtration prior to being
circulated back to the booths air stream.

Applications :

Filling, refilling, weighing & sampling of Raw material & Components

Type Front Open

Direction of flow Vertical


Material of Construction SS 304/ SS 316 or CRCA / GI Powder Coated
Cleanliness Class 100 as per US FED STD 209E

Particle Retention 0.3 micron & above


Noise Level 65 dB on scale ‘A’ ± 5
Velocity 90 FPM ± 20%
Illumination Flourescent tubes diffusers
Pressure Differential 0-25 mm inclined Manometers / Magnehelic Gauge
Power Supply 230 V Single Phase, 50Hz

Pre-Filters 10-15 micron rating, 3-Layers of HDPE mesh, 6mm Pressure Drop

Intermediaite Filters 3 micron & above, two layers of HDPE woven mesh and one layer
of Non-woven polyester Bondex Media, 9mm Pressure Drop,
Efficiency 97%
Supply HEPA Filters 99.97% efficiency @ 0.3 micron rating
Exhaust HEPA Filters 99.97% efficiency @ 0.3 micron rating
Blower Assembly Statically & Dynamically balanced DIDW type blower system

Special Features
Designed in accordance with WHO / GMP
?
3-Stage Filteration like Prefilter, Fine Filter, HEPA filter
?
Heavy duty Low noise motor blower assembly
?
Suitable to accommodate on floor & table balances
?

25

You might also like