28 ‘Cuaprer 2. Force Vectors . | LL : 2-4. Determine the magnitude of the resultant force *2-4. Determine the magnitude of the resultant force Fo = Fi + F, and is direction, measured counerdockwse Fy = F, + F, and its direction, measured clockwise fon {rom the positive x axis, the positive w axis 2S Resolve the force F, into components acting along , the u and v axes and determine the magnitudes of the components, on 2-4 Resolve the force F; into components acting along thew and v axes and determine the magnitudes of the ow, ‘omponents, j ! ps ; | \ . Rams eae Prob. 2-1 Probs. 2-4/6 Cyr force Facts downward at A on the (90> ermine the magnitudes of the 10 components of F ¢j ies aria SetF = spp SHeCted along the axes of AB and AC. “FR Solve Prob. 2-7 with y ¥ i 6 ; i fA, min Probs. 2273 jDQ, eee force from along of the along of the two | AC. 2-9. Resolve F; into components along the w and v axes and determine the magnitudes of these components. 2.10. Resolve F, into components along the w and v axes and determine the magnitudes of these components. F,=250N Probs. 2-9/10 21. The force acting on the gear tooth is F = 201b, Resolve this force into two components acting along the lines aa and bb. “2-12. The component of force F acting along line aa is Tequired to be 30 Ib. Determine the magnitude of F and its, ‘component along line bb. ay « Probs. 2-11/12 2.3. Vector ADomion oF Forces 29 2413. Force F acts on the frame such that its component acting along member AB is 650 Ih, directed from B towards A, and the component acting along member BC is 500 Ib, directed from B towards C. Determine the magnitude of F and its direction 8, Set 6 = 60" 2414. Force F acts on the frame such that its component acting along member AB is 650 Ib, directed from B towards A. Determine the required angle & (0° = = 90°) and the ‘component acting along member BC. Set F = 850 Ib and o= 30. Probs. 2-194 2-8. The plate is subjected to the two forces at A and B as shown. If # = 60°, determine the magnitude of the resultant of these two forces and its direction measured clockwise from the horizontal ‘2-16. Determine the angle # for connecting member A to the plate so that the resultant force of Fy and Fy is directed horizontally to the right. Also, what is the magnitude of the resultant force? F4=8kN Fg= 6KN Rk aCharter 2 Force Vectors 2-17. Determine the design angle 6 (0° < 6 < 90°) for ‘rut AB so thatthe 400-Ib horizontal force has acomponent ‘of $0 directed from A towards C. What is the component of force acting along member AB? Take & = 40° an Determine the design angle 4 (0° < 6 < 90°) between struts AB and AC so that the 400-b horizontal force has a component of 600 Ib which act upto the left in the same direction as from B towards A.Take § = 3 0b 4 221. Two forces act on the screw eye. If F) = 400N and ;= GOON, determine the angle 0 (0 = 0 = 180°) between them. so thatthe resultant force has a magnitude of F = 800N, 2-22, Two forces Fy and F; act on the screw eye. If theit lines of action are at an angle @ apart and the magnitude of ‘ach force is F, = F; = F, determine the magnitude of the ‘resultant force Fy and the angle between Fy and Fy F, FE Probs. 2-21/22 aa ine yf8s act on the screw eye, It F = GOON. 4 Sind the magnitude of the resultant force and the msl ithe resultant force is directed vertically upward, 2 Two forces are ‘applied at the end of a screw eye in hee Pelaprre, {ME ost. Determine. the, ange nd the magnitude of force Fw tha Teslant force en {YS Magnitude of force F so thatthe AB on the post is directed vertically Aandhas a magnitude of 750 N, |