Scribd
Upload
991 views

Types of Micrometers

There are five categories of micrometers based on the dimension being measured: outside, inside, depth, thread, and height. A standard inch micrometer measures to 0.001 inches and is used for outside measurements. Screw thread micrometers measure the pitch diameter of threads and come in four ranges for imperial measurements and four ranges for metric measurements. Depth micrometers are used to measure depth using a flat base attached to a micrometer sleeve with an extension rod. Inside micrometers are used for internal measurements larger than 1.5 inches and consist of a micrometer head, extension rods of varying lengths, and spacing collars.

Uploaded by

maivizhi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
991 views

Types of Micrometers

There are five categories of micrometers based on the dimension being measured: outside, inside, depth, thread, and height. A standard inch micrometer measures to 0.001 inches and is used for outside measurements. Screw thread micrometers measure the pitch diameter of threads and come in four ranges for imperial measurements and four ranges for metric measurements. Depth micrometers are used to measure depth using a flat base attached to a micrometer sleeve with an extension rod. Inside micrometers are used for internal measurements larger than 1.5 inches and consist of a micrometer head, extension rods of varying lengths, and spacing collars.

Uploaded by

maivizhi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

TYPES OF MICROMETERS

Precision Measuring Tools


Five categories of tools based on the dimension being measured
Outside Inside Depth Thread Height

Micrometer Caliper
Standard inch micrometer accurate to .001 in.

Screw Thread Micrometers


Measures pitch diameter of threads Pointed spindle and double-V swivel anvil
Shaped to contact pitch diameter of thread
Equal to outside diameter less depth of one thread

Limited to certain range


Four ranges for one-inch
8-13 TPI 14-20 TPI 22-30 TPI 32-40 TPI

Screw Thread Micrometers


Ranges stamped on micrometer frame Metric available also in ranges
0-25 mm 25-50 mm 50-75 mm 75-100 mm

Helix angle of thread can give slightly distorted reading


First set thread micrometer to thread plug gauge

Depth Micrometers

Micrometer Depth Gauge


Used for measuring depth of blind holes, slots, recesses, and projections Consists of flat base attached to micrometer sleeve
Extension rod of required length fits through sleeve and protrudes through base
Held in position by threaded cap on top of thimble Come in various lengths up to 9.000 in. (225 mm)

Screw has range: .500 or 1.000 in (25mm)

Available with either round or flat rods

Inside Micrometer Caliper

Inside Micrometer

Inside Micrometers
Used for internal measurements larger than 1.500 in. or 40 mm. Set consists of
Micrometer head with range of .500 or 1 in. Several extension rods of different lengths .500 in. spacing collar

Set cover range 1.5000 to over 100 in. Large sets have hollow rods for strength Read same manner as standard micrometer

You might also like