Scribd
Upload
19 views

BodePlot - Loop Gain Test Result

The document reports the results of a loopgain test conducted at different voltages, frequencies, and load conditions. Gain margin and phase margin were measured for tests run at 85VAC/47Hz and 264VAC/63Hz with no load, a capacitor load of 3600uF, and maximum load. Gain margins ranged from 10.9693dB to 34.9479dB while phase margins ranged from 45.8225 degrees to 104.029 degrees.

Uploaded by

senkum812002
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views

BodePlot - Loop Gain Test Result

The document reports the results of a loopgain test conducted at different voltages, frequencies, and load conditions. Gain margin and phase margin were measured for tests run at 85VAC/47Hz and 264VAC/63Hz with no load, a capacitor load of 3600uF, and maximum load. Gain margins ranged from 10.9693dB to 34.9479dB while phase margins ranged from 45.8225 degrees to 104.029 degrees.

Uploaded by

senkum812002
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

LOOPGAIN TEST RESULT

@ Vin 85Vac/47Hz, No load

Test condition: 85VAC 47Hz, No load Gain Margin = 25.3684 dB

Test condition: 85VAC 47Hz, , No load Phase Margin = 94.9378 Deg

@ Vin 264Vac/63Hz, No load

Test condition: 264VAC 63Hz, No load Gain Margin = 27.7686 dB

Test condition: 264VAC 63Hz, , No load Phase Margin = 95.5680 Deg

@ Vin 85Vac/47Hz, No load with Cap load(3600uF)

Test condition: 85VAC 47Hz, No load with Cap load Gain Margin = 34.1511 dB

Test condition: 85VAC 47Hz, , No load with Cap load Phase Margin = 50.6326 Deg

@ Vin 264Vac/63Hz, No load with Cap load(3600uF) (3600uF)

Test condition: 264VAC 63Hz, No load with Cap load Gain Margin = 34.9479 dB

Test condition: 264VAC 63Hz, No load with Cap load Phase Margin = 52.8072 Deg

@ Vin 85Vac/47Hz, Max load

Test condition: 85VAC 47Hz, Max load Gain Margin = 10.9693 dB

Test condition: 85VAC 47Hz, , Max load Phase Margin = 45.8225 Deg

@ Vin 264Vac/63Hz, Max load

Test condition: 264VAC 63Hz, Max load Gain Margin = 13.6407 dB

Test condition: 264VAC 63Hz, , Max load Phase Margin = 55.8165 Deg

@ Vin 85Vac/47Hz, Max load with Cap load(3600uF)

Test condition: 85VAC 47Hz, Max load with Cap load Gain Margin = 22.6327 dB

Test condition: 85VAC 47Hz, , Max load with Cap load Phase Margin = 103.774 Deg

@ Vin 264Vac/63Hz, Max load with Cap load(3600uF)

Test condition: 264VAC 63Hz, Max load with Cap load Gain Margin = 26.0820 dB

Test condition: 264VAC 63Hz, , Max load with Cap load Phase Margin = 104.029 Deg

You might also like