HMI OPERATION INSTRUCTION MANUAL

TURBOEXPANDER WITH COMPRESSOR LOAD

DESIGNED AND MANUFACTURED FOR: VALERUS ENGINEERING

LAT PROJECT: LAT517EC

May, 2012
LAT517EC-20-A42 REV.0

AS BUILT

LAT517EC-20-A42 REV.0

HMI Operating Instruction (LAT517)

Display Select (Menu) screen:
The Display Select screen is the navigation page from where all other screens can be accessed. It also includes login & logout functions to enable a set points entry screen. F1 MAIN F2 ALARMS F3 SHUTDOWNS F4 INDICATION SUMMARY F5 ALARMS HISTORY F6 SET POINTS SCREEN F7 START UP F8 HIC & SURGE CONTROL F10 button allows access to HMI internal configuration. The user name and password are the same: 0517

LAT517EC-20-A42 REV.0

MAIN:
The screen below displays current pressure & temperature values for lube oil & seal gas systems. The screen also shows status indications for: lube oil cooler, heater & pumps. No control is possible from this screen.

LAT517EC-20-A42 REV.0

Alarms:
The status of each individual alarm point is shown on this screen. All cleared alarms will be shown as a white text on a green background. The first out alarm points will be shown as a flashing yellow text on a black background. Acknowledged alarms will be indicated as a solid black text on a yellow background. All alarm points can be acknowledged with the local Ack/Reset pushbutton installed on the door of the control panel.

LAT517EC-20-A42 REV.0

Shutdowns (Trips) :
The status of each individual shutdown point is shown on this screen. All cleared shutdowns will be shown as a white text on a green background. The first out trip points will be shown as a flashing red text on a black background. Acknowledged shutdowns will be indicated as a solid white text on a red background. All trip points can be acknowledged with the local Ack/Reset pushbutton installed on the door of the control panel.

LAT517EC-20-A42 REV.0

Indication Summary:
All analog input signals for the unit are displayed in engineering units as a black text on a white background. The background may change if the corresponding alarm or shutdown has been activated.

LAT517EC-20-A42 REV.0

LAT517EC-20-A42 REV.0

Alarms & Shutdowns History:

Alarms & Shutdowns History Screen lists all the Alarm / Shutdown events. The list is 100 entries long & displays time & date for each AL/SD.

LAT517EC-20-A42 REV.0

Set Point Screen:

All alarms and shutdowns set points can be set from this screen. The operator has access to these settings after login at the Menu screen. The user name and password are the same: 0517

LAT517EC-20-A42 REV.0

10

LAT517EC-20-A42 REV.0

11

LAT517EC-20-A42 REV.0

System Startup:
The Startup Screen displays general information about the expander status.

12

LAT517EC-20-A42 REV.0

SURGE CONTROL & HIC

The Surge Control & HIC Screens displays information about anti surge & speed controllers. Surge control: The process value is the differential pressure across compressor. The set point is the calculated value derived from algorithm supplied by LA Turbine. The control output is the PID function outcome directed to the recycle valve. The control of the recycle valve could be switched to Hand mode & in turn to enable an operator to change the valve position by pressing F9 or F10 keys.

13

LAT517EC-20-A42 REV.0

Speed control: The Set Point is the max speed allowable in RPM. The PID loop will prevent an expander going into over speed. The Limit bar = the set point. The speed bar is the actual expander speed. The SIC Out bar is the PID function output. The Hand bar indicates input value entered by an operator locally. The DCS bar indicates the remote control value. Low Selector Output indicates value sent to an IGV after selection made between the SIC & hand/DCS Auto signals. The operator has access to this page after login at the Menu screen.

14

LAT517EC-20-A42 REV.0
MEMORY MAP LAT517 Range & Units Program Tags Real F10:0 F10:1 F10:2 F10:3 F10:4 F10:5 F10:6 F10:7 F10:8 F10:9 F10:10 F10:11 F10:12 F10:13 F10:14 F10:15 F10:16 F10:17 F10:18 F10:19 F10:20 F10:21 F10:22 F10:23 F10:24 F10:25 F10:26 F10:27 F10:28 F10:29 F10:30 F10:31 F10:32 F10:33 F10:34 F10:35 F10:36 F10:37 F10:38 F10:39 F10:40 F10:41 F10:42 F10:43 F10:44 F10:45 F10:46 Description PDIT-5000 THRUST BEARINGS DIFF PRESS.EXP/COMP PDI-5040 LUBE OIL diff PRESS TO BRGS PDIT-5085 SEAL GAS DIFF. PRESS. VT-5000 EXP.R SIDE VIBRATION (X) PT-5020 LUBE OIL RESERVOIR PRESS VT-5001 COMP SIDE BEARINGS VIBR. (X) SPARE PT-5005 EXP. BEFORE SCREEN INLET PRESS. PT-5002 EXP. AFTER SCREEN INLET PRESS. PIC-5000 CUSTOMER DCS IGV CONTROL 0-100% PIT-5002 COMP. SUCTION PRESS. PT-5003 COMP. DISCHARGE PRESS. FIT-5000 COMP.SUCTION FLOW FLOW spare ST-5000 SPEED SPARE TE-5030 LUBE OIL TO COOLER TEMP. TE-5060 LUBE OIL TO BRG HOUSING TEMP. TE-5020 LUBE OIL DRAIN TEMP. TE-5000 EXP SIDE BRG TEMP. TE-5002 COMP SIDE BRG TEMP. TE-6 SPACE HEATER THRUST LOW RANGE MAX RANGE SET THRUST HIGH RANGE MAX RANGE SET PDIT-2 LUBE OIL DIFF. PRESS. MAX RANGE SET PDIT-3 SEAL GAS DIFF PRESS. MAX RANGE SET VT-5000 EXPANDER SIDE VIBRATION (X) MAX RANGE PT-5020 L.OIL RESERVOIR PRESS RANGE SET VT-5001 COMP SIDE BEARINGS VIB. (X) MAX RANGE SPARE PT-5005 EXP. BEFORE SCREEN IN PRESS.MAX RANGE PT-5002 EXP. AFTER SCREEN IN PRESS.MAX RANGE PIT-5002 COMP. SUCTION PRESSURE MAX RANGE PT-5003 COMP DISCHARGE PRESS. MAX RANGE FIT-5000 COMP.SUCTION FLOW FLOW MAX RANGE ABS OF THRUST PDAH-5000 SET POINT AL PDI-5040 LUBE OIL DIFF PRESS SET POINT AL PDIT-5085 SEAL GAS DIFF.PRESS. SET POINT VT-5000 EXP. SIDE VIB. (X) SET POINT AL PT-5020 LUBE OIL RESERVOIR PRESS SET POINT AL VT-5001 COMP SIDE BEARINGS VIB. (X) SET POINT AL SPARE PDT-5000 EXP. SCREEN DIFF. PRESS. SET POINT AL PDT-5001 COMP. SCREEN DIFF. PRESS. SET POINT AL THRUST BEARINGS PDAHH-5000 SET POINT SD PDALL-5040 LUBE OIL DIFF PRESS SETPONT SD PDIT-5085 SEAL GAS DIFF.PRESS. SET POINT SD

-200 - 200 PSID 0-500 PSID 0-50 PSID 0-5 MILS 0-5000 PSIG 0-5 MILS 0-1000 PSIG 0-100% 0-400 PSIG 0-400 PSIG 0-100 WC 0-60000 RPM DIRECT F DIRECT F DIRECT F DIRECT F DIRECT F DIRECT F -200 PSIG 200 PSIG 500 PSID 50 PSID 5 MILS 500 PSIG 5 MILS 1000 PSIG 1000 PSIG 400 PSIG 400 PSIG 100 inWC 80 PSID 80 PSID 12 PSID 1 MILS 250 PSIG 1 MILS 15 PSID 15 PSID 140 PSID 65 PSID 10 PSID

15

LAT517EC-20-A42 REV.0
F10:47 F10:48 F10:49 F10:50 F10:51 F10:52 F10:53 F10:54 F10:55 F10:56 F10:57 F10:58 F10:59 F10:60 F10:61 F10:62 F10:63 F10:64 F10:65 F10:66 F10:67 F10:68 F10:69 F10:70 F10:71 F10:72 F10:73 F10:74 F10:75 F10:76 F10:77 F10:78 F10:79 1.5 MILS 300 PSID 1.5 MILS 150 F 135 F 160 F 175 F 175 F 185 F 185 F 0-54.51 MMscfd 0-400 PSID 0-100 % 0-100 % 0-100 % 0-100 % 0-16383 0-16383 0-16383 0-16383 0-16383 0-16383 0-16383 0-16383 0-16383 0-16383 0-16383 0-16383 0-16383 VT-5000 EXP. SIDE VIBRATION (X) SET POINT SD PT-5020 LUBE OIL RESERVOIR PRESS SETPOINT SD VT-5001 COMP SIDE BEARINGS VIB. (X) SET POINT SD SPARE TAH-5030 LUBE OIL TO COOLER SET POINTS AL TE-5060 LUBE OIL AFTER COOLER SET POINT AL TE-5020 LUBE OIL DRAIN TEMP. SET POINT AL TE-5000 EXP SIDE BRG TEMP. SET POINT AL TTE-5002 COMP SIDE BRG TEMP. SET POINT AL TAHH-5000 EXP SIDE BRG TEMP. SET POINT SD TAHH-5002 COMP SIDE BRG TEMP. SET POINT SD COMPRESSOR SUCTION FLOW PDI-5001 COMP DIFF PRESS ANTISURGE VALVE POSITION DISPLAY HIC HAND CONTROLLER OUTPUT PIC-5000 FROM CUSTOMER DCS IGV CONTROL HIC LOW SELECTOR OUTPUT PDIT-5000 THRUST BEARINGS PRESS.EXP. SIDE -200 TO 200 PSID PIT-5040 LUBE OIL PRESS TO BRGS 0-500 PSIG PT-5020 LUBE OIL RESERVOIR PRESS 0-500 PSIG PDIT-5085 SEAL GAS DIFF. PRESS. 0-50 PSID VT-5000 EXP. SIDE VIBRATION (X) 0-5 MILS VT-5001COMP SIDE BEARINGS VIBRATION (X)0-5MILS ST-5000 SPEED 0-60000 RPM FIT-5000 COMP.SUCTION FLOW FLOW 0-100 inWC PIT-5002 COMP. SUCTION PRESS. 0-400 PSIG PT-5003 COMP. DISCHARGE PRESS. 0-400 PSIG PT-5005 EXP. BEFORE SCREEN IN PRESS.0-1000 PSIG PT-5002 EXP. AFTER SCREEN IN PRESS. 0-1000 PSIG PIC-5000 FROM CUSTOMER DCS IGV CONTROL 0100% SPARE SPARE SPARE

16

LAT517EC-20-A42 REV.0
Program Tags Integer N9:0 N9:0/0 N9:0/1 N9:0/2 N9:0/3 N9:0/4 N9:0/5 N9:0/6 N9:0/7 N9:0/8 N9:0/9 N9:0/10 N9:0/11 N9:0/12 N9:0/13 N9:0/14 N9:0/15 N9:1 N9:1/0 N9:1/1 N9:1/2 N9:1/3 N9:1/4 N9:1/5 N9:1/6 N9:1/7 N9:1/8 N9:1/9 N9:1/10 N9:1/11 N9:1/12 N9:1/13 N9:1/14 N9:1/15 N9:2 N9:2/0 N9:2/1 N9:2/2 N9:2/3 N9:2/4 N9:2/5 N9:2/6 N9:2/7 1 = Bit set (high) 0 = Bit reset (low) Description Alarm Bits SSH-5000 OVERSPEED AL VSH-5060 AIR FAN COOLER VIBRATION HIGH AL LSL-5020 LUBE OIL RESERVOIR LEVEL LOW AL PDAL-5085 SEAL GAS DIFF.PRESS. ALARM PDAH-5000 THRUST LOAD HIGH AL EXP SIDE PDAL-5040 LUBE OIL DIFF PRESS LOW ALARM VXAH-5000 EXPANDER SIDE BEARINGS VIBRATION PAH-5020 LUBE OIL RESERVOIR PRESS ALARM BIT TAH-5030 LUBE OIL TO COOLER TEMP. HIGH ALARM TAH-5060 LUBE OIL TO BRG HOUSING TEMP. ALARM TAH-5020 LUBE OIL DRAIN TEMP. ALARM TAH-5000 EXP SIDE BRG TEMP. ALARM TAH-5002 COMP SIDE BRG TEMP. ALARM SENSOR FAULT AL BITS PDAH-5000 EXP. SCREEN DIFF. PRESS. ALARM BIT PDAH-5001 COMP. SCREEN DIFF. PRESS. ALARM BIT Alarm Bits PDAH-5000 THRUST LOAD HIGH AL COMP. SIDE VXAH-5000 COMP. SIDE BEARINGS VIBRATION

1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM 1 = ALARM

1 = ALARM 1 = ALARM

1 = TRIP 1 = TRIP 1 = TRIP 1 = TRIP 1 = TRIP 1 = TRIP 1 = TRIP 1 = TRIP

SHUTDOWN BITS SAHH-5000 OVERSPEED SD SD BIT PDALL-5085 SEAL GAS DIFF. PRESS. SD BIT THRUST BEARINGS PDAHH-5000 EXP SD BIT PDALL-5040 LUBE OIL DIFF PRESS TO BRGS SD BIT VXAHH-5000 EXP. SIDE VIBRATION SD BIT PAHH-5020 LUBE OIL RESERVOIR PRESS SD BIT XA-12 EXTERNAL SD SD BIT TAHH-5000 EXP SIDE BRG TEMP. SD BIT

17

LAT517EC-20-A42 REV.0
N9:2/8 N9:2/9 N9:2/10 N9:2/11 N9:2/12 N9:2/13 N9:2/14 N9:2/15 1 = TRIP 1 = TRIP 1 = TRIP 1 = TRIP 1 = TRIP 1 = TRIP TAHH-5002 COMP SIDE BRG TEMP. SD BIT XA-11 REMOTE SD SD BIT SPARE SD BIT THRUST BEARINGS PDAHH-5000 C COMP. SIDE SD BIT SPARE SD BIT VXAHH-5001 COMP. SIDE VIBRATION SD BIT

N9:3 N9:3/0 N9:3/1 N9:3/2 N9:3/3 N9:3/4 N9:3/5 N9:3/6 N9:3/7 N9:3/8 N9:3/9 N9:3/10 N9:3/11 N9:3/12 N9:3/13 N9:3/14 N9:3/15 N9:4/0 N9:4/1 N9:4/2 N9:4/3 N9:4/4 N9:4/5 N9:4/6

1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL

SENSORS FAULT BITS Ch1 Open Loop PDIT-5000 Ch2 Open Loop PT-5040 Ch3 Open Loop PT-5020 Ch3 Open Loop PDIT-5085 Ch5 Open Loop VT-5000 Ch6 Open Loop VT-5001 Ch7 Open Loop ST-5000 Ch8 Open Loop FIT-5000 Ch9 Open Loop PIT-5002 Ch10 Open Loop PIT-5003 Ch11 Open Loop PT-5005 Ch12 Open Loop PT-5002 Ch13 Open Loop PY-5000

1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=NOT OK 1=OPEN

SENSOR FAULT TE-5030 RTD FAULT TE-5060 RTD FAULT TE-5020 RTD FAULT TE-5000 RTD FAULT TE-5002 RTD FAULT TE-6 RTD FAULT SPACE HEATER RTD FCV VALVE STATUS AL DISPLAY STATUS SAHH-5000 OVERSPEED AL VSH-5060 LUBE OIL FAN COOLER VIBRATION SMITH AL LSL-5020 LUBE OIL LEVEL SWITCH AL PDAL-5085 SEAL GAS DIFF.PRESS. AL PDAH-5000 THRUST BEARINGS EXP AL PDAL-5040 LUBE OIL DIFF PRESS TO BRGS AL VXAH-5000 EXPANDER SIDE BEARINGS VIBRATION AL

N9:5 N9:6 N9:7 N9:8 N9:9 N9:10 N9:11

0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL

18

LAT517EC-20-A42 REV.0
N9:12 N9:13 N9:14 N9:15 N9:16 N9:17 N9:18 N9:19 N9:20 N9:21 N9:22 N9:23 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL 0=NO AL 1=FIRST AL 2=SUBSEQUENT AL PAH-5020 LUBE OIL RESERVOIR PRESS AL TAH-5030 LUBE OIL TO COOLER TEMP.AL TAH-5060 LUBE OIL AFTER COOLER AL TAH-5020 LUBE OIL DRAIN TEMP. AL TAH-5000 EXP SIDE BRG TEMP. AL TAH-5002 COMP SIDE BRG TEMP. AL AL DISPLAY ANALOG SIGNAL FAULT AL PDAH-5000 EXPANDER SCREEN DIFF. PRESS. AL SPARE PDAH-5000 THRUST BEARINGS COMP AL VXAH-5001 COMPRESSOR SIDE BEARINGS VIBRATION AL SPARE SD DISPLAY STATUS SAHH-5000 OVERSPEED SD PDALL-5085 SEAL GAS DIFF. PRESS.SD PDAHH-5000 THRUST BEARINGS EXP SD PDALL-5040 LUBE OIL DIFF PRESS TO BRGS SD VXAHH-5000 EXP. SIDE VIBRATION SD PAHH-5020 LUBE OIL RESERVOIR SD XA-12 EXTERNAL SD TAHH-5000 EXP SIDE BRG TEMP. SD TAHH-5002 COMP SIDE BRG TEMP. SD XA-11 REMOTE SD SPARE SD PDAHH-5000 C THRUST BEARINGS COMPRESSOR SIDE SD SPARE SD VXAHH-5001 COMP. SIDE VIBRATION SD

N9:24 N9:25 N9:26 N9:27 N9:28 N9:29 N9:30 N9:31 N9:32 N9:33 N9:34 N9:35 N9:36 N9:37 N9:38

0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD 0=NO SD 1=FIRST SD 2=SUBSEQUENT SD

19

LAT517EC-20-A42 REV.0
N9:39 N9:40 N9:41 N9:42 N9:43 N9:44 N9:45 N9:46 N9:47 N9:48 N9:49 N9:50 N9:51 N9:52 N9:53 N9:54 N9:55 N9:56 N9:56/0 N9:56/1 N9:56/2 N9:56/3 N9:56/4 N9:56/5 N9:56/6 N9:56/7 N9:56/8 N9:56/9 N9:56/10 N9:56/11 N9:56/12 N9:56/13 N9:56/14 N9:56/15 1 = READY 0=NOT READY or RUNNING 1 = RUNNING 0 = STOPPED 1 = ALARM PRESENT or NOT RESET 1 = SD PRESENT or NOT RESET 1 = AUX PUMP STARTED 1 = RELAY ENERGIZED NO ALARM 1 = RELAY ENERGIZED NOAL 1 = RELAY ENERGIZED 1 = SOV ENERGIZED (SD VALVE OPEN) 1 = STARTER ENABLE (PUMP ON) 1 = STARTER ENABLE (PUMP ON) 1 = STARTER ENABLE (FAN ON) 1 = STARTER ENABLE (HEATER ON) 1 = RELAY ENERGIZED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED 0=WHITE 1=YEL 2=RED AL_SD_DISPALY HMI AL SD DISPLAY SAH_HH-SAHH-5000 AL DISPLAY VSH-5060 AL SD DISPLAY LSL-5020 AL SD DISPLAY PDAL/LL-5085 AL SD DISPLAY PDAH/HH-5000 AL SD DISPLAY PDAL/LL-5040 AL SD DISPLAY VXAH/HH-5000 AL SD DISPLAY PAH-5020 AL SD DISPLAY TAH-5030 AL SD DISPLAY TAH-5060 AL SD DISPLAY TAH-5020 AL SD DISPLAY TAH/HH-5000 AL SD DISPLAY TAH-5002 AL DISPLAY PDAH-5000 SPARE AL SD DISPLAY VXAH-5001

OUTPUT MODULE O:3 EXPANDER READY XL-101 EXPANDER RUNNING XL-102 COMMON TROUBLE AL XL-103 COMMON TROUBLE SD XL-104 AUX PUMP ON LIGHT XL-5031 COMMON AL RELAY COMMON SD RELAY SPACE HEATER CONTROL RELAY CRE-1 EXP. CONTROL XY-5000 PUMP #1 CONTROL RELAY PM-5030 PUMP #2 CONTROL RELAY PM-5040 OIL FAN COOLER MOTOR CONTROL RELAY FM-5060 L.OIL LEVEL LOW CTRL RELAY HEATER CUT OFF SPACE HEATER CONTROL RELAY (REPEAT) SPARE SPARE

20

LAT517EC-20-A42 REV.0
N9:57 1 = CLOSED 0=OPEN N9:57/0 1 = CLOSED 0=OPEN N9:57/1 1 = CLOSED 0=OPEN N9: 57/2 1 = CLOSED 0=OPEN N9: 57/3 1 = CLOSED 0=OPEN N9: 57/4 1 = CLOSED 0=OPEN N9: 57/5 1 = CLOSED 0=OPEN N9: 57/6 1 = CLOSED 0=OPEN N9: 57/7 1 = CLOSED 0=OPEN N9: 57/8 1 = CLOSED 0=OPEN N9: 57/9 1 = CLOSED 0=OPEN N9: 57/10 1 = CLOSED 0=OPEN N9: 57/11 1 = CLOSED 0=OPEN N9: 5732/12 1 = CLOSED 0=OPEN N9: 57/13 1 = CLOSED 0=OPEN N9: 57/14 N9: 57/15 N9:58 N9:58/0 N9:58/1 N9:58/2 N9:58/3 N9:58/4 N9:58/5 N9:58/6 N9:58/7 N9:58/8 N9:58/9 N9:58/10 N9:58/11 N9:58/12 N9:58/13 N9:58/14 N9:58/15 INPUT MODULE I:0 HS-101 EXPANDER START HS-102 EXPANDER STOP HS-103 ACKNOWLEDGE/RESET HS-104 LAMP TEST HS-5031 AUX PUMP STOP HS-5030 LUBE OIL PUMP PM-5030 IN AUTO HS-5030 LUBE OIL PUMP PM-5030 IN HAND HS-5032 LUBE OIL PUMP PM-5040 IN AUTO HS-5032 LUBE OIL PUMP PM-5040 IN HAND HS-5060 AIR FAN COOLER ON/OFF VSH-5060 AIR FAN COOLER VIBRATION SWITCH TSHL-5025 LUBE OIL HEATER THERMOSTAT LSL-5020 LUBE OIL RESERVOIR LEVEL SWITCH SSH-5000 OVERSPEED ALARM SWITCH SSHH-5000 OVERSPEED SHUTDOWN SWITCH SPARE INPUT MODULE I:2 LUBE OIL PUMP PM-5030 STATUS LUBE OIL PUMP PM-5040 STATUS LUBE OIL FAN COOLER STATUS LUBE OIL HEATER STATUS UZSO-5000 TRIP VALVE LIMIT SWITCH (OPEN) UZSC-5000 TRIP VALVE LIMIT SWITCH (CLOSED) XA-11 REMOTE SD ESD XA-12 REMOTE ESD

21