Scribd
Upload
39 views2 pages

Maquina Tri Bo Logic A

The pin on disc wear test machine can perform various wear tests including ball on disc, pin on disc, and pin on plate tests. It can measure wear coefficient, friction force, wear loss, temperature, and humidity under dry, wet, and lubricated conditions. The machine can control test parameters like rotational speed from 1 to 1,700 RPM, load from 5 to 200 N, temperature from 20 to 150°C or up to 600°C for dry tests, and humidity from 30 to 90% RH. It records data on parameters like rotational speed, wear, friction force, temperature, and more.

Uploaded by

André Ramalho
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views2 pages

Maquina Tri Bo Logic A

The pin on disc wear test machine can perform various wear tests including ball on disc, pin on disc, and pin on plate tests. It can measure wear coefficient, friction force, wear loss, temperature, and humidity under dry, wet, and lubricated conditions. The machine can control test parameters like rotational speed from 1 to 1,700 RPM, load from 5 to 200 N, temperature from 20 to 150°C or up to 600°C for dry tests, and humidity from 30 to 90% RH. It records data on parameters like rotational speed, wear, friction force, temperature, and more.

Uploaded by

André Ramalho
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Pin on disc wear test machine

http://www.labkorea.com/products/wear%20testin...

labkorea Home Korean products Home

PD-102

Pin on Disc Wear Test Machine

Application This system can do following wear test - Ball on disc, pin on disc, pin on plate and thrust washer. Measuring parameters are wear coefficient, friction force, wear loss measurement, temperature and humidity. Test conditions are in dry, wet conditions and lubrication. Technical Spec Rotational speed : 1 to 1,700 RPM Radios of test Track : 0 to 40 mm Load range : 5 to 200 N Humidity control : 30-90% R.H Heating range : 20-150 Heating method : cartridge or hot air heater lever ratio : 10:1, 2:1 Temperature sensor : K-type thermocouple Disc specimen: 30, 60 mm dia. x 8 mm thick Pin specimen: 5 mm dia.x 15 mm long or other size Ball specimen: 5.95 mm, 12.7 mm dia. Interface : MUX Serial Link Interface Module Software: Sequence control and data acquisition software Motor : AC servo 750W,1.4kW Power : 220VAC, single phase

Heating Option: Lubricated Tests : up to 200 Dry Tests : up to 600 C by cartridge or hot air Air Heating Capacity : 220 V, 440 W Temperature Sensor : K-type thermocouple Lubricant Enclosure: Bath Volume : 100 ml Heating Power : 200 W Temperature Rangr : Ambient to 200 PC spec. 500 MHz CPU 64 MB RAM 6.4 GB HDD 3.5" FDD MS compatible mouse 17" color monitor RS 232 serial port

Control Rotation Speed Temperature Load Test Duration Record Rotational Speed Wear Friction Force Temperature Contact Potential Number of Revolution Sliding Speed Friction Coefficient Sliding Distance Test Duration

1 de 2

17-09-2011 10:20

Pin on disc wear test machine

http://www.labkorea.com/products/wear%20testin...

2 de 2

17-09-2011 10:20

You might also like