Scribd
Upload
62 views1 page

Pipewall Thickness Gauges Accessories: Katflow

The document describes pipewall thickness gauges that can be used as accessories for KATflow portable ultrasonic flowmeters. There are two types of gauges - NT for normal temperatures and HT for high temperatures. Both gauges measure wall thickness from 1.0 to 200 mm with high resolution and accuracy. When connected to a KATflow flowmeter, the gauge is automatically recognized and the flowmeter enters wall thickness measuring mode.

Uploaded by

Chevronelle
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views1 page

Pipewall Thickness Gauges Accessories: Katflow

The document describes pipewall thickness gauges that can be used as accessories for KATflow portable ultrasonic flowmeters. There are two types of gauges - NT for normal temperatures and HT for high temperatures. Both gauges measure wall thickness from 1.0 to 200 mm with high resolution and accuracy. When connected to a KATflow flowmeter, the gauge is automatically recognized and the flowmeter enters wall thickness measuring mode.

Uploaded by

Chevronelle
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Pipewall Thickness Gauges KATflow Accessories

Pipewall thickness transducers for portable ultrasonic flowmeters Automatic sensor recognision Calibrated transducers Type NT for normal temperature applications Type HT for high temperature applications

Specification
Type NT
Temperature range Measuring range Resolution Linearity Cable length : : : : : -20 ... 60 C 1.0 ... 200 mm 0.01 mm 0.1 mm 1.5 m

Type HT
Temperature range Measuring range Resolution Linearity Cable length : 0 ... 200 C (540 C for short periods) : 1.0 ... 200 mm : 0.01 mm : 0.1 mm : 1.5 m

Description
The KA Tflow range of non-invasive flowmeters utilises ultrasonic technology for the accurate flow measurement of liquids in full pipes. The pipewall thickness is not always a known quantity when using clamp-on ultrasonic flowmeters. As the pipewall thickness is a cr itical parameter for flow measurements, pipewall thickness transducers can be supplied as accessories together with the portable ultrasonic flowmeter KATflow 220. The pipewall thickness transducer are connected to the flowmeter at the flow sensor connection port.

As soon as the pipewall thickness transducer is connected to the flowmeter, the KATflow unit switches automatically into wall thickness measuring (WTM) mode with automatic recognition of the sensor type and serial number. Standard materials do not need to be calibrated when using the flowmeter model KATflow 220. In order to take wall thickness readings, the wall thickness transducer requires to be pressed against the pipe wall using some acoustic coupling component. The wall thickness values are indicated on the LCD display of the KATflow ultrasonic flowmeter.

Dimensions
Type NT

Type HT

Katronic Technologies Ltd. Phone 23 Cross Street Fax Leamington Spa CV32 4PX Web GREAT BRITAIN E-mail

+44 (0)870 3000 110 +44 (0)870 3000 111 www.katronic.co.uk [email protected] Issue: DS/WTM/V2.0E/0803 Specification subject to change without notice

You might also like