Scribd
Upload
7 views

Specifications

The FTM-10R is a handheld radio that covers a wide frequency range from 0.5-999 MHz across AM, FM, and ham bands. It can transmit with power outputs of 50/20/5 watts on the 2m band and 40/20/5 watts on the 70cm band. It has a double conversion superheterodyne receiver for FM and AM modes and a triple conversion receiver for wide FM bands. The radio has a sensitivity of less than 1uV across most frequency ranges and a 4-8 watt audio output.

Uploaded by

Awalian Indar Oktaferdiana
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
7 views

Specifications

The FTM-10R is a handheld radio that covers a wide frequency range from 0.5-999 MHz across AM, FM, and ham bands. It can transmit with power outputs of 50/20/5 watts on the 2m band and 40/20/5 watts on the 70cm band. It has a double conversion superheterodyne receiver for FM and AM modes and a triple conversion receiver for wide FM bands. The radio has a sensitivity of less than 1uV across most frequency ranges and a 4-8 watt audio output.

Uploaded by

Awalian Indar Oktaferdiana
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

FTM-10R

May, 2007

General Frequency Range: RX: 0.5 - 1.8 MHz (AM BC) 76 - 108 MHz (FM BC) 108-137 MHz (Air Band) 137-174 MHz (144 MHz HAM) 174-222 MHz (GR1 VHF TV) 300-420 MHz (GR2 ) 420-470 MHz (430 MHz HAM) 470-800 MHz (GR1 UHF TV) 800-999 MHz (GR2 USA Cellular Blocked) TX: 2 m /70 cm Amateur Bands Channel Steps: 5/6.25/8.33/(9)/10/12.5/15/20/25/50/100/200 kHz (9): AM Only Emission Type: F3E, F2D Antenna Impedance: 50 Ohms Frequency Stability: 5 ppm @ 14 F ~ +140 F ( 10 C ~ +60 C) Operating Temperature Range: 4 F ~ +140 F ( 20 C ~ +60 C) Supply Voltage: Nominal: 13.8 V DC, Negative Ground Operating: 11.7 ~ 15.8 V, Negative Ground Current Consumption: RX: 0.5 A (Receive) (Approx.) 8.3 A / 6 A / 2A (TX, 2 m 50W / 20 W / 5 W) 8.5 A / 6 A / 2A (TX, 70 cm 40W / 20 W / 5 W) Case Size (W x H x D): 4.4" x 1.5" x 7" (112 x 37.6 x 178 mm) (w/o knobs & connectors) Weight (Approx.): 2.9 lb. (1.3 kg) Transmitter RF Power Output: 50/20/5 W (2 m) 40/20/5 W (70 cm) Modulation Type: Variable Reactance Spurious Radiation: At least 60 dB below Microphone Impedance: 2 k ohms Receiver Circuit Type:

FM / AM: Double-Conversion Super heterodyne WFM: Triple-Conversion Super heterodyne AM / FM Radio: Single-Conversion Super heterodyne Intermediate Frequencies: FM / AM: 1st: 47.25 MHz, 2nd: 450 kHz WFM: 1st: 45.8 MHz, 2nd: 10.7MHz, 3rd: 1MHz FM Radio: 130 kHz, AM Radio: 50 kHz Sensitivity: 5 V TYP for 10 dB SN (0.5-1.7 MHz, AM) 2 V TYP for 12 dB SINAD (76-108 MHz, WFM) 0.8 V TYP for 10 dB SN (108-137 MHz, AM)

0.2 V for 12 dB SINAD (137-140 MHz, FM) 0.2 V for 12 dB SINAD (140-150 MHz, FM) 0.25 V for 12 dB SINAD (150-174 MHz, FM) 1 V TYP for 12 dB SINAD (174-222 MHz, WFM) 0.8 V TYP for 10 dB SN (300-336 MHz, AM) 0.25 V TYP for 12 dB SINAD (336-420 MHz, FM) 0.2 V for 12 dB SINAD (420-470 MHz, FM) 5 V TYP for 12 dB SINAD (470-540 MHz, WFM) 5 V TYP for 12 dB SINAD (540-800 MHz, WFM) 0.4 V TYP for 12 dB SINAD (800-899.99 MHz, FM) 0.8 V TYP for 12 dB SINAD (900 - 999.99 MHz, FM) *USA Version Cellular Blocked Squelch Sensitivity: Better than 0.16 V (Amateur Band) Selectivity : NFM, AM 12 kHz / 30 kHz ( 6 dB / 60 dB) AF Output: 8 W @ 4 Ohm for 10 % THD (@ 13.8 V) BTL EXP SP 4 W @ 4 Ohm for 10 % THD (@ 13.8 V) Normal EXP SP/CH AF Output Impedance: 4-16 ohms

You might also like