Scribd
Upload
100 views

Running IGSS As An Operator Part One - Scada

This document provides an overview of Lesson 3 which teaches how to run the Industrial Graphic System Supervisor (IGSS) software as an operator. It discusses starting IGSS using either the IGSSMaster.exe or IGSS.exe programs, describes some basics of the IGSSMaster interface, and covers locating objects, controlling objects and plant monitoring, and handling alarms. The document also provides instructions for setting up and opening the Demo project in IGSS to complete the lesson exercises.

Uploaded by

Ram Krishan Sharma
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
100 views

Running IGSS As An Operator Part One - Scada

This document provides an overview of Lesson 3 which teaches how to run the Industrial Graphic System Supervisor (IGSS) software as an operator. It discusses starting IGSS using either the IGSSMaster.exe or IGSS.exe programs, describes some basics of the IGSSMaster interface, and covers locating objects, controlling objects and plant monitoring, and handling alarms. The document also provides instructions for setting up and opening the Demo project in IGSS to complete the lesson exercises.

Uploaded by

Ram Krishan Sharma
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Lesson 3 Running IGSS as an Operator, Part One

INSIGHT AND OVERVIEW

Contents of this lesson

Topics:
Starting IGSS IGSSMaster basics Locating objects (Object Browser) Controlling objects and plant monitoring Alarm Handling

Lesson 3: Running as an operator, part one

Starting IGSS Use IGSSMaster.exe From IGSS install folder (default: C:\Program Files\7T\IGSS32\V9.0\GSS) As a Windows shortcut From Windows Start menu Autostart when Windows boots
...or use IGSS.exe (IGSS Starter) for a more operatorrestricted environment.

IGSS Starter

Lesson 3: Running as an operator, part one

IGSS Master

The IGSSMaster

Lesson 3: Running as an operator, part one

Some quick IGSS concepts


IGSS Project

Diagram 3 Diagram 1 Area B Graph 01 Area A Graph 04 Graph 03

Diagram 4

Diagram 5 Area C

Diagram 2
Graph 02

Lesson 3: Running as an operator, part one

Demo Project
Global Training Cases

Home

Dairy Refuse Disposal Coffee Recipe Vester Hassing District Heating Waste Water Treatment Overview Water Supply Overview of Training Diagrams Beverage Overview of Training Diagrams 2 Pump Station

Overview of Project Examples District Heating Water Supply Boiler Waste Water Treatment

PST01 Levels

Boiler Parameters Water Supply Total Extractions Water Supply Total Outlets

Lesson 3: Running as an operator, part one

Exercise Setup Exercise: Running IGSS as an Operator, part one


Exercise requirements: Install IGSS Free50 Load Demo license Open Demo project To load the Demo License:
1. Change the mode to Design mode (Click Application Menu) 2. Click Information and Support > License > Drop down arrow 3. Select Install IGSS Demo License 4. Click OK in the Install License form
Lesson 3: Running as an operator, part one 7

Exercise Setup (cont)


To open the Demo Project:
1. Change the mode to Design mode (Click Application Menu) 2. Stop any running project (IGSS Master > Home tab > Stop button) 3. Click Design and Setup tab > Open Project button> Drop down arrow 4. Select Open IGSS Demo Project 5. Click OK in the dialog box. 6. Start the Demo project in IGSS Master > Home tab > Start button.

Lesson 3: Running as an operator, part one

More Information...

Find presentations and exercises on http://www.7t.dk/products/igss/training /scada-training-videos.aspx

Lesson 3: Running as an operator, part one

You might also like