Scribd
Upload
116 views

Forged Steel Clevis: Caution: Never Exceed The Working Load Limit

This document provides specifications for forged steel clevises manufactured by Kulkoni, Inc. It lists various sizes of clevises along with their maximum working load limits, dimensions, minimum and maximum pin sizes, and weights. A table at the bottom specifies the maximum allowable working load limits in pounds for each tap size of clevis, ranging from 1,250 to 27,500 pounds. Important warnings are provided to never exceed the working load limit and to order clevises within the specified pin size ranges.

Uploaded by

rajedmaglinte
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
116 views

Forged Steel Clevis: Caution: Never Exceed The Working Load Limit

This document provides specifications for forged steel clevises manufactured by Kulkoni, Inc. It lists various sizes of clevises along with their maximum working load limits, dimensions, minimum and maximum pin sizes, and weights. A table at the bottom specifies the maximum allowable working load limits in pounds for each tap size of clevis, ranging from 1,250 to 27,500 pounds. Important warnings are provided to never exceed the working load limit and to order clevises within the specified pin size ranges.

Uploaded by

rajedmaglinte
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

KULKONI, INC.

FORGED STEEL CLEVIS


CAUTION: NEVER EXCEED THE WORKING LOAD LIMIT.
Read important warnings and information in T.O.C. > GENERAL WARNINGS and CLEVISES .

According to Manufacturers Standardization Society SP 58 (Type 14). Forged and heat treated to ASTM-A-668. Size Number 2** 2.1/2** 3** 3.1/2 4 Max Tap Size 5/8 7/8 1.3/8 1.1/2 1.3/4 Min Tap Size 3/8 5/8 7/8 1.1/8 1.3/8
Max W.L.L. in Pounds* see table see table see table see table see table

All Dimensions in Inches B A C D E (Max) 3.3/4 13/16 1.7/16 1 5/8 4 1.9/16 2.1/2 1.1/4 7/8 5 1.13/16 3 1.1/2 1.3/8 6 2.1/16 3.1/2 1.3/4 1.1/2 6 2.5/16 4 2 1.3/4

F 5/16 5/16 1/2 1/2 1/2

Max Pin Min Pin Wgt Diameter Diameter P/100 3/4 1.1/2 1.3/4 2 2.1/4 1/2 3/4 1 1.1/4 1.1/4 77 250 400 600 800

**#2, #2.1/2, #3 Clevises are available in Type 316 Stainless Steel. Maximum Allowable Working Load Limits are based on Tap Sizes Listed in Table. Caution: DO NOT DEVIATE from range of pin sizes listed for each clevis size. All W.L.L. are inclusive of the range of pin diameters listed for each clevis size. Maximum Allowable Working Load Limits shown DO NOT APPLY to stainless steel clevises. Grip tolerance is +1/8", -1/16". Tap Size Maximum Allowable in Inches W.L.L. @ 650 F 3/8 1/2 5/8 3/4 7/8 1 1.1/8 1.1/4 1.3/8 1.1/2 1.3/4 1,250 1,900 3,500 5,300 7,500 9,700 12,200 15,000 18,500 22,500 27,500

When ordering, please specify finish (self colored or galvanized), size no., tap size & pitch, and grip, pin type & size.

306

You might also like