Scribd
Upload
124 views

Shaft Propellers CPP

The document discusses propeller and controllable pitch propeller (CPP) systems for ships. It describes pilgrim propellers which have a sleeved design with a resin bronze boss and pearlitic cast iron sleeve. It also discusses flange mounted propellers that bolt directly to the propeller shaft. The document outlines remote and hub-mounted CPP servos that use hydraulic circuits and linkages to control the pitch of the propeller blades from the bridge via pumps, valves and feedback systems.

Uploaded by

mavericksailor
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
124 views

Shaft Propellers CPP

The document discusses propeller and controllable pitch propeller (CPP) systems for ships. It describes pilgrim propellers which have a sleeved design with a resin bronze boss and pearlitic cast iron sleeve. It also discusses flange mounted propellers that bolt directly to the propeller shaft. The document outlines remote and hub-mounted CPP servos that use hydraulic circuits and linkages to control the pitch of the propeller blades from the bridge via pumps, valves and feedback systems.

Uploaded by

mavericksailor
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 19

Shaft Propellers and CPP

Pilgrim (Sleeved) Propeller


Propeller Boss Resin Bronze Pilgrim Nut Aluminium Cone 1 mm Propeller Sleeve Pearlitic Cast Iron Earthing Bond High Strength, High Friction Epoxy Resin

Jacking Point

Pearlitic Cast Iron Sleeve

Propeller Boss

Pilgrim Propeller

Pilgrim (Sleeved) Propeller


Pilgrim Nut Resin Earthing Bond

Cone

Jacking Point

Pearlitic Cast Iron Sleeve

Propeller Boss

Locking Device

Nitrile Tyre Chamber

Pilgrim Nut Loading


Ring

Coarse Thread 15mm Pitch

Plug

Oil Injection

Pilgrim (Sleeved) Propeller

Push Up Travel mm

Pilgrim (Sleeved) Propeller Ambient Push Up Curves


Temperature
1 10 2 205 3 5 30 5 5 0 0.15 0.16 0.17 0.18 0.19 0.20 0.21 0.22 0.23 0.24

Showing Effect on Travel of Different Co-efficients of Friction Minimum Push Up Load Values for Assembly Temperature

Grip -

2.7 x Ahead Torque 2.2 x Astern Torque

Push Up Load MN

Flange Mounted Propeller


Hollow Shaft for Control Rods / Oil Passages

Propeller Boss

Fitted Bolts and Dowels

Flange Mounted Propeller

Remote from Hub Servo

Remote from Hub Servo


Blade Seal Crank Ring Grease Filled Hub Oil Supply / Return Feedback Linkage

Closing Plate and Support

Crank Pin and Sliding Shoe

Connecting Rod Supported at Intervals

Oil Distribution Box with White Metal Bearing

Servo in Hub

Servo in Hub

Blade Seal

Crank Ring

Servo in Hub
Cylinder Block Oil Supply / Return Feedback Linkage

Closing Plate and Support

Crank Pin and Sliding Shoe

Oil Transfer Tubes Supported at Intervals

Oil Distribution Box

Hydraulic Circuit

Hydraulic CircuitControl Directional Valve


Unit From / To Remote Position

Emerg. Connection Valves


Lock Valves

Pitch Indicator

Pumps (2)

Bridge Wing Control

Bridge Control CPP Control

Bridge Wing Control


Pitch Demand Speed Demand Air Signal Feedback Surveillance

Machinery Control Room Panel Central Control Unit

Hydraulic System

ElectroPneumatic Converter

Pitch Transmitter Oil Distribution Box

Governor Engine

You might also like