SIMATIC SIMATIC PDM V6.

1
Notes on Installation and Usage
The following information has higher priority than other documents. Please read this information, because it contains important data on the installation and use of SIMATIC PDM !.". When printing the file, a!e s"re that the left and right $% illi eters &1 in'h( for A) portrait si*e. argins are set to a #idth of

Ta+le of Contents Part I Notes on Installation

1 $ ) % 6 2 6 8 ,eneral Contents of the Consign ent .ard#are /e0"ire ents Soft#are /e0"ire ents Installing the Soft#are SIMATIC PDM Manage De1i'e Catalog 3i'ense 4e5 3i'ense 71er1ie# Uninstalling the Soft#are

Part II Notes on Usage

1 $ ) S"pported De1i'es and Profiles Ne# 9eat"res and A end ents in the Ne# Versions S"pporting .A/T DDs of the .C9 3i+rar5 S"pple ent to the :,eneral 3i'en'e Conditions for Soft#are Prod"'ts for A"to ation and Dri1es: D;M7 Mode Setting the P,<PC Interfa'e Notes on Config"ration Choice of the Communication Path Communication %ia &A'T Modem Communication %ia the Serial Port *ngineering of a 'emote I+, Data Ad.ustment from ST*P # &/ Config to SIMATIC PDM Menu ,ptions 0 Customi1e 0 2og 0 Debug Protocol Alternati%e Communication Paths in Plants with 'edundantly Configured S#3)44

% 6 2 #." #.$ #.( #.) #.#.! #.# Stations #.5 'outing #.6 7M2 Import #."4 &A'T Ser%er

#."" 6 8 1= 11

&A'T 'I, S&C Mode 4no#n Pro+le s 9"rther Infor ation >o"r Conta't &not for the D;M7 1ersion( Notes on the .otfi?

Part I Notes on Installation

The installation notes contain important information that you will re8uire in order to install SIMATIC PDM !.". 'ead these notes before installing the software.

,eneral
This 9SIMATIC PDM !."9 CD contains the following components:

* @ AMan"als ;ser Manual, <etting Started, Profibus <uidelines =a%ailable in different

languages>

* @ ADo'" entation @ De1i'eIntegration Contains a folder =9*?amples9> with e?amples

that you can install and another =9Manuals9> with instructions on de%ice integration.

* @ ADo'" entation @ 7pen So"r'e Soft#are This folder contains sources. * @ ADo'" entation @ BM3 ;?port Contains e?amples, descriptions and the scheme for * * * * * * *
the application of *?tensible Mar@up 2anguage =7M2>. More on this under Inde?.htm =only in *nglish>. Please do not install. A =1AMSI Installation pac@age Microsoft Installer (." A =)AVC Installation pac@age Microsoft CBB $44- SP" 'edistributable Pac@age @ =6AA"to ation3i'enseManager Installation pac@age of SIMATIC authori1ation tool Automation 2icense Manager ersion -.4 SP$ =<erman, *nglish, Crench, Italian, Spanish> A =6ADotNet9ra e#or! Installation pac@age Microsoft .D*T Cramewor@ $.4 @ =8ASIMATICAManager Installation pac@age of SIMATIC Manager ersion -.) SP) =<erman, *nglish, Crench, Italian, Spanish> @ 22ASIMATICAPDM Installation pac@age of SIMATIC PDM ersion !." =<erman, *nglish, Crench, Italian, Spanish>, also contains electronic manuals and sample pro.ects for P',CIE;S DP + PA and for &A'T> @ AdditionalAProd"'ts @ .C9A.A/TCSer1erA-.$ Installation pac@age of &A'T Ser%er ersion $."). Fou can find the re8uired license @eys on the CD co%er =only in *nglish> G>

G> The installation procedure for third3party pro.ects may %ary from the typical SIMATIC installation procedure. The appearance of the installed program may differ from the typical SIMATIC appearance. If these products are already installed in a different %ersion, they are not remo%ed automaticallyH you ha%e to remo%e them separately.

;le'troni' Man"als

* After installing SIMATIC PDM, the electronic manuals are a%ailable on your computer.
Fou can obtain further information on SIMATIC PDM on the Internet at the following address

http:[email protected]+pdm

Contents of the Consign ent

* * * *
" ? CD contains a complete %ersion of SIMATIC PDM !." " ? D D de%ice catalog De%ice 2ibrary ="+$4"">. ;SE stic@ with licenses corresponding to the ordered product Software Product Certificate

.ard#are /e0"ire ents

In order to wor@ with SIMATIC PDM !.", you need a PC that meets the following minimum re8uirements in processor performance, 'AM and graphics: 7perating S5ste Mini " /e0"ire ents forD Pro'essor /AM ,raphi's 33333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333 MS /indows 7P Professional MS /indows Ser%er $44( '$ !44 Mh1 !44 Mh1 $-! MEG> 7<A "4$)?#!5 "! Eit color depth $-! MEG> 7<A "4$)?#!5 "! Eit color depth

G> A minimum 'AM of -"$ ME is recommended ;se a programming de%ice or PC with the latest performance capabilities if you are editing e?tensi%e SIMATIC PDM or ST*P # pro.ects or wor@ing with hardware configurations containing se%eral hundred de%ices or remote I+,s with many modules. Cor online functions, the PC will need either a SIMATIC D*T interface module or a &A'T modem.

Soft#are /e0"ire ents

7perating S5ste s PDM !." can be run in the following operating systems: 7perating S5ste MS /indows 7P Professional MS /indows Ser%er $44( '$ /indows $44(> Ser1i'e Pa'! &SP( SP( =subse8uently named MS /indows 7P> SP$ =subse8uently named MS

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCC

Fou can find additional information on this at the Microsoft website on the Internet.

SIMATIC PDM !." can be run with the following ST*P # pac@ages: * ST*P# -.) B SP* ST*P# -.SIMATIC PDM !." can be run with the following PCS # pac@ages: * PCS # !." B SP) * PCS # #." * PCS # #." B SP" * PCS # #." B SP$ InternetC;?plorer SIMATIC PDM uses the Microsoft Component ,b.ect Model =C,M technology>. This re8uires current /indows ,2* D22s =,b.ect 2in@ing and *mbedding>. Me or5 /e0"ire ents In a typical installation =- languages, including the components SIMATIC PDM, de%ice catalog, &CC library and &A'T ser%er> SIMATIC PDM !." ta@es up appro?imately (#4 ME of storage space on your hard dis@. Cor some operations you will need additional temporary dis@ space. User /ights To be able to wor@ with PDM !." in MS /indows 7P+$44(, you ha%e to be at least logged on as a primary user. To install software and to set up modules using the 9Setting the P<+PC Interface9 application, you must ha%e administratorIs rights. /hen installing PDM !." on an NT9S dri1e, the administrator must allow all primary users that wor@ with ST*P # on this computer full access to the ST*P # installation folder. To enable this, right3clic@ to obtain a pop3up conte?t menu in /indows *?plorer. Then select the Sharing and Se'"rit5... menu command. In the properties sheet that is then displayed, select the 9Security9 tab. If this tab is not present in /indows 7P, then you will ha%e to go to the /indows *?plorer and select the 7ptions E 9older 7ptions... menu command. In the properties sheet that is then displayed, go to the 9 iew9 tab9 and clear the 9;se simple file sharing ='ecommended>9 chec@ bo?. If pro.ects are to be sa%ed on NT9S dri1es, then primary users must also be allowed full access to them.

9ile s5ste s /hen used with an MS /indows DT file system =DTCS>, PDM !." will ha%e a somewhat lower performance than with an CAT file system. .i+ernation Mode Shifting to hibernation mode is generally allowed by PDM !.". &owe%er, hibernation must not be triggered if online connections are open or pro.ects are being accessed %ia a networ@. In such case, online connections could be unintentionally terminated, and open pro.ects on networ@ dri%es may e?perience data loss. Cor these reasons, the energy options for the operating system in the /indows Control Panel should be set so that hibernation is not automatically triggered =by timer>. &ibernation should not be triggered manually by the user in the cases mentioned abo%e.

7nline Do'" entation SIMATIC PDM !." ,nline help contains two parts. Information on the de%ices and their properties is based on /indows help. Common help for the application is based on &TM2 format. Fou need the Internet *?plorer for %iewing &TM2 help.

Installing the Soft#are

If there is an older %ersion = ).4 or older> of SIMATIC PDM =or SIMATIC SIP',M> installed on your PC, * please uninstall this %ersion =Start 0 Settings 0 System Control 0 Software 0 SIMATIC PDM or SIMATIC SIP',M>,

* delete the directory Siemens A PDM or Siemens A SIP',M =Ee sure that you didnIt sa%e
any user specific data in this directory.> before installing the new %ersion.

The installation of the components starts in a setup frame with a component choice. The setup frame will be started automatically when the CD is inserted =if the Autorun function is acti%e> or manually by starting the S*T;P.e?e program from the CD. The components "st not be installed from the indi%idual foldersJ Please tic@ the components you need in the component choice: Component Comment Dependance SIMATIC Manager SIMATIC PDM =install only if you do not ha%e none already installed ST*P # or PCS #> =install if re8uired, installation is preselected> SIMATIC Manager, ST*P # or PCS # full %ersion =install if re8uired> none =if older %ersions a%ailable or not yet older %ersion or not yet installed yet installed, install>

&A'T Ser%er Automation 2icense Manager

Fou can also install single components, considering the dependence between them. It could be re8uired to reboot your computer after the installation. The installation of the third3party product &CC &A'T Ser%er differs from the installation of SIMATIC products =see also 3i'ense 4e5>. Please use recommended installation paths, especially when installing the &CC &A'T Ser%er. If an older %ersion of the &CC &A'T Ser%er is installed, you should remo%e it beforehand

%ia the Control Panel. CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCC I portant notesD The components of the SIMATIC PDM Software are registered in the MS /indows DT system files. Fou cannot mo%e or rename files or folders belonging to the software using MS /indows utilities such as *?plorer or modify data belonging to the software in the MS /indows registry. The programs may no longer run properly after such modifications. Eefore installing SIMATIC PDM o%er an earlier %ersion, we recommend that you restart your computer. /hen wor@ing with the Single3Point 2icense you must obser%e that you can only wor@ in the language in which you e?ecuted the setup. CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCC

SIMATIC PDM Manage De1i'e Catalog

After ha%ing installed SIMATIC PDM you are re8uested to import the de%ices you use onto your computer. To do this, the 9SIMATIC PDM Manage De%ice Catalog9 program is started. The de%ices which are supported by SIMATIC PDM can be found on the D D 9De%ice 2ibrary "+$4""9. Cor notes on the de%ices, see the readme file on this D D. CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCC I portant notesD If an error message occurs that de%ices are not installed when opening pro.ects in the SIMATIC Manager, you should import them using the 9SIMATIC PDM Manage De%ice Catalog9 program =menu commandl 7ptions E SIMATIC PDM E Manage De1i'e Catalog>, before you continue wor@ing with these pro.ects. Fou must therefore na%igate to the root directory of the D D on which the de%ice catalog is located =9De%ice 2ibrary "+$4""9>. After you ha%e e?ecuted the 9Manage De%ice Catalog9 function, you must close and reopen the SIMATIC ManagerJ If you are wor@ing with a de%ice catalog prior to "+$4"", then you will ha%e to install the 9De%ice2ibrary "+$4""9 or later as of PDM !.". CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCC

3i'ense 4e5
Component SIMATIC Manager SIMATIC PDM &A'T ,PC Ser%er Automation 2icense Manager none see 2icense ,%er%iew Serial number necessary: ,CF;;357!)53';&7-3 K&"(;3CD)*P! none Authori1ation

SIMATIC PDM: /hen the installation of SIMATIC PDM =and other components, if selected> is completed, please insert the ;SE stic@ with the basic authori1ation for SIMATIC PDM =labeled: SIMATIC PDM 2icense Ley Dis@> and start the program Automation 2icense Manager =Start 0 Simatic 0 2icense Management 0 Automation 2icense Manager> to carry out the licensing. 2icensing for all the options for which you ha%e recei%ed separate ;SE stic@s must then be carried out in the same way. Please do not process any ST*P # pro.ects with SIMATIC PDM process de%ices in the SIMATIC Manager or in &/ Config before SIMATIC PDM has been installed or ade8uately authori1ed. In that case, your pro.ect data could be lostJ To operate SIMATIC PDM !.", you must ma@e sure the Automation 2icense Manager is installed. 33333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 Note The Automation 2icense Manger pre%ents the authori1ations+license @eys from being installed on in%alid dri%es or media such as 'AM dri%es, dis@ettes or compressed dri%es =i.e. DE2SPAC*>. If the dri%e in a de%ice is reported as being a 9remo%able medium9 and not, as usual, as a 9hard dri%e9, it will be treated as a CD, which means that no license @ey may be installed on it. In the case of compressed dri%es, you can install the authori1ation on the associated host dri%e. 'ead the notes on the Automation 2icense Manager in the A2M '*ADM*./'I file on the SIMATIC PDM installation CD under 9Automation 2icense ManagerAdis@"A9. &idden files are stored in the folder 9MDri%e, on which the authori1ation+license @ey is installed0:AA7 DC KK9. These files and the folder must not be deleted, mo%ed, or copied. They contain data re8uired for the licensing of your software. If you do not adhere to these guidelines, the authori1ation+license @ey may be irretrie%ably lost. 33333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 333333

Notes on errorCfree "se of the li'ense !e5s The license @ey ;SE stic@ must not be read3only. Eecause the license @ey ;SE stic@ is to be used without write protection, there is a danger that a %irus could be transferred from the hard dis@ to the ;SE stic@. Fou should therefore run a %irus chec@ on your PC or programming de%ice e%ery time you install or remo%e a license @ey. If you use an optimi1ing program which enables you to mo%e fi?ed bloc@s of memory, only use this option once you ha%e mo%ed the license @ey from the hard dis@ bac@ to the license @ey ;SE stic@. /ith the 2icense Ley a specially mar@ed cluster is shown on the target dri%e. Some chec@ programs display this cluster as 9defecti%e9. Do not try to restore it. Do not forget to transfer the license @ey to the license @ey ;SE stic@ before formatting, compressing, or restoring your hard dis@ or before installing a new operating system. If a bac@up copy of your hard dis@ contains copies of license @eys, there is a danger that these copies may o%erwrite the %alid installed license @eys when you restore your bac@up data to the hard dis@, thereby destroying the %alid license @eys. To pre%ent a %alid license @ey from being o%erwritten by a bac@up copy, you must remo%e all license @eys before you ma@e a bac@up copy or e?clude the license @eys from the bac@up.

3i'ense 71er1ie#
Easic licenses

* * * * *

Single Point: pro.ect modification for " TA<, no 2ifelist diagnostics Easic: basic functionality, no 2ifelist diagnostics, ) TA<s Ser%ice: pac@age for stand alone use, "$5 TA<s S#: pac@age for integated use in SIMATIC S# without routing, "$5 TA<s PCS#: pac@age for integated use in SIMATIC PCS #+S# with routing, "$5 TA<s

,ptional licenses &A'T3M;7: ;se of &A'T ser%er * Integration: Integration in SIMATIC ST*P # * 'outing: Data routing in SIMATIC PCS #+S#3)44 * TA< "$5: ma?imum of editable SIMATIC PDM ob.ects * TA< -"$ * TA< "4$) * TA< $4)5 ;pgrade licenses

* * * *

TA< "$5 0 -"$ TA< -"$ 0 "4$) TA< "4$) 0 $4)5 TA< $4)5 0 unlimited

Uninstalling the Soft#are

Software products must be remo%ed %ia Start 0 Settings 0 Control Panel 0 Software 0 Components. The following se8uences+dependencies must be obser%ed when uninstalling this software: A"to ation 3i'ense ManagerD Fou can uninstall these components independently of the other components. .A/T Ser1erD Fou can uninstall these components independently of the other components. &owe%er, uninstalling them may affect the function of SIMATIC PDM. SIMATIC PDMD Fou "st uninstall these components +efore uninstalling the SIMATIC Manager or ST*P # or PCS #. Si ati' ST;P 2 or SIMATIC Manager &7;M 1ersion(D The SIMATIC Manager may not be uninstalled, e?cept in the following cases: * Fou are as@ed to do so when installing a newer %ersion of SIMATIC ST*P # or the Simatic Manager. * Fou want to upgrade from the standalone %ersion =SIMATIC Manager> to the %ersion integrated in ST*P #. * Fou want to completely remo%e SIMATIC from your P<+PC.

/hen uninstalling SIMATIC PDM, the folder 9SIMNPDM9 and 9Templates9 and all files contained in it are deleted. Cor this reason, please do not sa%e any user data in this directory and do not install any other programs in these directories.

Part II Notes on Usage

The following sections deal with topics that do not belong to a product manual or to 'eadme files for specific products. Fou should, howe%er, always read the 'eadme files for the specific products.

S"pported De1i'es and Profiles

Fou can find a list of the currently integrated de%ices at: * on the De%ice 2ibrary "+$4"" D D in the folder Manuals A MLanguage0 A ... * or 9online9 under Start 0Simatic 0 Documentation 0 MLanguage0 0 ...

Ne# 9eat"res and A end ents in the Ne# Version

Cor more information, read the file 9/hatisDew./'I9 on your SIMATIC PDM CD or refer to the corresponding section 9/hatIs DewO9 in the online help. Fou can call this topic from the contents page of the &elp on SIMATIC PDM =menu command .elp E Contents>.

S"pporting .A/TCDDs of the .C9 3i+rar5

/hen installing the de%ice descriptions from the De%ice D D =9De%ice 2ibrary "+$4""9>, the &A'T DDs of the &CC can be installed. Cor de%ice types imported as mentioned abo%e, Siemens pro%ides no warranty and no liability for damages ensuing from their use. Please let us @now your problems with &A'T DDs of the &CC library.

S"pple ent to the :,eneral 3i'en'e Conditions for Soft#are Prod"'ts for A"to ation and Dri1es:
Warrant5 Class The &CC ,PC Ser%er as a part of &A'T communication with standard &A'T multiple?er has class C =see enclosed 9<eneral 2icense Conditions for Software Products for Automation and Dri%es9, Chapter (>. -. Warrant5 (."4. Siemens pro%ides no warranty for the following De%ice Descriptions =DDs> and the proper interaction of these DDs with the appropriate e8uipment: * Siemens only pro%ides a warranty up to the interface for de%ice specific DDs for non3

* * *

Siemens e8uipment. Cor non e8uipment3specific DDs such as DDs corresponding to the Profibus PA profiles or the ;ni%ersal or Common Practice Commands of &A'T. Cor DDs included in the &CC 2ibrary on the De%ice D D =9De%ice 2ibrary "+$4""9>. Cor DDs which are integrated by the Catalogue Import function.

6. 3ia+ilit5 !."4. Siemens is not e?plicitly liable for damage ensuing from the use of the following DDs and from the interaction with the appropriate e8uipment: * Siemens only pro%ides a guarantee up to the interface for de%ice specific DDs for non3 Siemens e8uipment. * Cor non e8uipment3specific DDs such as DDs corresponding to the Profibus PA profiles or the ;ni%ersal or Common Practice Commands of &A'T. * Cor DDs included in the &CC 2ibrary on the De%ice D D =9De%ice 2ibrary "+$4""9>. * Cor DDs which are integrated by the Catalogue Import function. I portant note on the de1i'e des'riptions deli1ered #ith SIMATIC PDM The de%ice descriptions for field de%ices which are not Siemens products are included free of charge in the scope of deli%ery. The licensee is authori1ed to use the de%ice descriptions for these de%ices in the sa e #a5 as a trial li'ense in accordance with the general conditions for the use of software for automation and dri%es. The licensee has the right to use these under the same conditions as for the PDM software.

D;M7 Mode
If no license @ey is a%ailable, PDM will run in D*M, mode. * Communication with the de%ices and print .obs are not possible. * A ma?imum of " PDM ob.ect can be planned. * Four pro.ect data could be destroyed when editing pro.ects with more than " PDM ob.ect. In D*M, mode, that is if you do not obtain a license @ey, you ha%e no right to support or warranty or liability for possible damages arising from the use of the program.

Setting The P,<PC Interfa'e

Fou can call the P<+PC interface from: * SIMATIC Manager =only SIMATIC PDM Integrated> * /indows Control Panel

A''ess Point of Appli'ationD S#,D2ID* Mod"le Para eter Set UsedD MModule name0=P',CIE;S> * PCI cards: CP-!"", CP-!"( A$, CP-!") A$ * PCIe cards: CP-!$"

PCMCIA cards:

CP--"", CP--"$

MModule name0=IS,, TCP+IP, 'CC "44!> * PCI cards: CP"!"(, CP"!"( A$, (Com *therlin@ (C64-C3T7, other networ@ cards =see SIMATIC D*T> * PCIe cards: CP"!$( * PCMCIA cards: CP"-"$ PC internal =local> * PCI cards: CP"!"(, CP"!"( A$, (Com *therlin@ (C64-C3T7, other networ@ cards =see SIMATIC D*T> * PCIe cards: CP"!$( * PCMCIA cards: CP"-"$ Station Para etersD ST*P # ersion -.?:

P< + PC is the only master on the bus:

Chec@bo? set

Net#or! Para eters * P',CIE;S DP+PA coupler =Siemens>: Transmission rate: )-.)- @bits+s Profile: DP

* P',CIE;S DP+PA coupler SL" =PepperlBCuchs>

=Please as@ PeperlBCuchs for the actually recommended settings> Transmission rate: 6(.#- @bits+s Profile: ;ser3defined Eus parameters: Tslot: Min Tsdr: Ma? Tsdr: Tset: T8ui: <ap Cactor: 'etry 2imit Ttr: )46$$ "444 "-4 4 "4 ( "66!5 tEit tEit tEit tEit tEit tEit

The new PepperlBCuchs coupler SL$ =L2D$3<T3DP...> does no longer need these parametersJ It can be used with a DP profile, but you must set a response monitoring time of - sec =typical %alue> at the DP master, for e?ample CP))(3- *?t..

* P',CIE;S DP + PA lin@
Transmission rate: e.g. ".- Mbits+s Profile: DP

* P',CIE;S DP + *T$44M + 'emote I+, + &A'T

Transmission rate: e.g. ".- Mbits+s Profile: DP

Notes on Config"ration

7.1

Choice of Communication Path

Some de%ices can be accessed %ia se%eral communication paths =for e?ample, &A'T de%ices %ia *T$44M with &A'T modules and %ia &A'T modems> depending on the rele%ant pro.ect planning. /hen you open SIMATIC PDM for the de%ice for the first time, you can enter the standard communication path. To change this, you can open the corresponding dialog %ia the menu command De1i'e E Co "ni'ation path. Any changes made here will be acti%ated only after performing a sa%e =menu command 9ile E Sa1e>.

7.2

Communication via HART Modem

If there is besides SIMATIC PDM a second &A'T master =for e?ample &A'T &andheld Communicator> connected to the &A'T networ@, SIMATIC PDM will brea@ the communication between whiles. Fou can immediately restart the communication. If a D,S dri%er for the Serial Interface is installed on your PC =see file C:AC,DCI<.SFS>, SIMATIC PDM needs probably se%eral retries to open the connection %ia &A'T modem. ,ne of these D,S dri%ers is, for e?ample, &A'TD* .SFS, which is installed with SIP',M P of SI*M*DS. Please uninstall the dri%er in order to a%oid this problem. ;se the uninstall tool of the dri%erIs application or ma@e the statement line in C,DCI<.SFS inacti%e and restart the PC. Ey inserting &A'T de%ices, for e?ample, in an *T$44M module, the &A'T de%ices will be inserted also in all &A'T3Modem networ@s automatically for direct communication.

7.3

Communication via the Serial Port

Cor communication %ia the serial port, set the transmission buffer length to " byte =9low9> and the recei%e buffer to "! =9high9>. /hen using a 'S$($ &A'T modem under /indows 7P we recommend for se%eral de%ices to reduce the recei%e buffer to " byte. To ma@e these settings, proceed as follows: * 'ight3clic@ on 9My Computer9 and select 9Properties9. Then select the following path: .ard#are E De1i'e Manager E Ports E C7M 1 ...6 . * Double3clic@ on the appropriate port. Then select the following path: Properties E Port Settings E Ad1an'ed .... * *nter the %alues for the recei%e buffer and transmission buffer here. * To accept the settings you ha%e to restart the computer.

7.4

n!ineerin! of a Remote "#$

In some cases, it is necessary to assign a concrete de%ice from the catalog to an ob.ect, before you are allowed to insert subordinate ob.ects. Fou ha%e to start SIMATIC PDM for the ob.ect assignment =I,pen ,b.ectI function from the conte?t menu>. ;?a pleD Insert a 'emote I+, and assign an appropriate de%ice, for e?ample, an *T$44iS head end module. Insert a 'emote I+, module. Fou ha%e to assign a &A'T3capable module first, before you insert a channel and a &A'T de%ice. The predefined module

Iunused slotI may not ha%e channels and &A'T de%ices. /ith &A'T3capable modules the channels are created automatically. At 'emote I+,s, SIMATIC PDM currently only supports &A'T field de%ices in single drop mode.

7.%

&ata Ad'u(tment from ST P 7 H) Confi! to S"MAT"C P&M

Data ad.ustment of the &/ Config configuration now contains DP+PA de%ices and se%eral remote I+, pro.ects, as long as they ha%e a SIMATIC PDM e8ui%alent =*DD mapping>. All e?isting configured modules and &A'T field de%ices are con%erted into corresponding SIMATIC PDM configuration structures using the data ad.ustment.

7.*

Menu $+tion( , Cu(tomi-e , .o! , &e/u! Protocol

In this dialog you can acti%ate the log tool. It generates a list of protocol messages with information about the internal process of SIMATIC PDM. Eut you should only acti%ate it, if the SIMATIC PDM contact person =see below> as@s you to do it. If the logging function is enabled =,ptions 0 Settings 0 Protocol>, in rare cases the following error message will appear: 9MSAccess Dri%er=G.mdb> for ,DEC not found. Please install the ,DEC en%ironment for MS3AccessJ9 In such case, on your CD go to the folder MDAC-.$3SP(, which contains the file. Double3 clic@ this file to start installation of the re8uired ,DEC en%ironment. Cor further information on this installation, go to the following Microsoft Internet site: http:++www.microsoft.com+data+ Cor further information on MDAC and a download of Microsoft, go to the following Microsoft Internet site: http:++support.microsoft.com+@b+(4"$4$+en3us

7.7

Alternative Communication Path( "n Plant( )ith Redundantl0 Confi!ured S71422 Station(

If SIMATIC PDM notifies a connection abort due to a disrupted communication path, it will try to use an alternati%e communication path at the ne?t attempt of getting a connection, if a redundantly configured S#3)44 Station is a%ailable.

7.3

Routin!

ia routing, de%ices which are connected to the following modules can be accessed:

* CP ))(3- *?t Cirmware (.4 or higher * CP; )"? Cirmware -." or higher * I*+PE lin@ 7.4 5M. "m+ort

During the 7M2 import de%ice specific messages could appear, which should be ac@nowledged by the user.

The SIMATIC Plant iew will always be created automatically for SIMATIC PDM Detwor@ iew ob.ects and the import of these ob.ects in the SIMATIC Plant iew is not necessary. &/ Config ob.ects, which are created only in the SIMATIC Plant iew, can be imported or e?ported, but they lose their connection to &/ Config with this action, i.e. you must 9Select9 these 9&/ Config ob.ects9 again from &/ Config. Cor import files with remote I+, systems that were created with an older %ersion than SIMATIC PDM -.$ we recommend the following: Cirst, import these files in an empty pro.ect with SIMATIC PDM !." and then e?port the file=s>. Then you can use this e?port file in e?isting pro.ects.

7.1= HART Server

After writing of a changed TA<, the 92earn9 function of &A'T Ser%er must be e?ecuted again. Fou should not change the name of the ser%er =Default: &A'TSer%er> in the &A'T ser%er pro.ect, although it is possible by clic@ing right mouse button and selecting 9Properties9. The change of the name in an e?isting pro.ect can cause communication problems. Fou should not use special characters in De%ice TA<s. Fou must not use points =.> in De%ice TA<s. In that case, the correct data transfer can not be guaranteed =Point is used as a hierarchical separator, for e?ample, Multiple?er. Panel. De%ice>. Fou can find an e?ample =,PC.&,C> in the installation path in the directory ...AStep#A*?amplesA,PC. Fou can open the &A'T ser%er by double3clic@ing on this file. During the initiali1ation of the &A'T Ser%er you should not operate your computer, because this may cause the abortion of the function in the &A'T ser%er.

7.11 HART R"$ SHC Mode

Ey acti%ating this functions you will chec@ in 'emote I+,s for analog channels with &A'T communication to see if the S&C functionality =uninterrupted &A'T command se8uence> is supported corresponding to the 9&A'T on P',CIE;S9 specification issued by the 9P',CIE;S P P',CID*T International =PI> fieldbus organi1ation. If support is detected, this functionality will automatically be applied by Simatic PDM and result in shorter loading and reading times of parameter data from &A'T field de%ices. If there is no such support, this functionality will not be applied and the standard method will be used. NoteD If application of the 9&A'T 'I, S&C Mode9 increasingly results in communication brea@downs during communication with indi%idual &A'T field de%ices, deacti%ate the 9&A'T 'I, S&C Mode9 when processing these &A'T field de%ices.

4no#n Pro+le s

* Access %iolation could occur, if you wor@ online with se%eral de%ices in &/ Config at the
same time. /or@around: Please close ST*P # &/ Config and start it again.

* If the error message 9An internal ,2* error occurred9 is displayed, please start the file * * *
p#sNpdmNapplicationN?.e?e from the folder C:ASiemensAStep#AS#bin. To copy or paste de%ices in the Detwor@ iew, please use only the conte?t menu or the menu commands ;dit E Cop5 < ;dit E Paste of the SIMATIC Manager, and not the @eyboard shortcuts Ctrl3C + Ctrl3 . If communication problems arise at a module when downloading an *T$44iS from SIMATIC PDM, the following modules or de%ices cannot no longer be reached. In this case, e?ecute the IdownloadI function in the process de%ice networ@. The message 9Connection could not be established9 incorrectly appears se%eral times for parent ob.ects during communication with &A'T de%ices connected after *T$44M %ia *thernet 'outing. Fou can communicate with these de%ices after ac@nowledging these messages. /hen using SIMATIC PDM 2ife2ist %ia routing, 2ife2ist does not support detailed diagnostics. Fou can obtain detailed diagnostics %ia the SIMATIC Manager, the SIMATIC PDM application, and the Maintenaces Station. If problems arise with S/ITC& *S after ha%ing performed an o%erinstallation of SIMATIC PDM, please reinstall the SI'I;S D*T ob.ect manager. If you install PDM o%er an e?isting PCS# installation, you ha%e to set the pro.ect path for the Maintenance pro.ect anew. Therefore, you ha%e to select the pro.ect in the SIMATIC Manager.

* * *

9"rther Infor ation

* SIMATIC PDM con%erts parameters when the corresponding unit is changed. In some
cases it is possible to choose from units of different physical dimensions. There is no automatic con%ersion for this case. The parameters are mar@ed as Inot con%ertedI until they are loaded in the de%ice. If you later install ST*P # in different languages, you must repeat the SIMATIC PDM installation and tic@ the respecti%e languages. Fou can e?it the file selection dialog without selecting a file and ignore the message which follows. In the system %iew and in the networ@ %iew of the SIMATIC Manager a new de%ice type can be assigned %ia the SIMATIC PDM E De1i'e Sele'tion function. The short address 4 is re8uired for the connection of &A'T de%ices on an *T $44M and all common multiple?ers. Message Do. $-#:- occurs if you open sample pro.ects with SIMATIC PDM Standalone %ersion, because the sample pro.ects contain components for the integrated %ersion. Please ac@nowledge this message. The function 9Set address...9 with 'outing and without DP+PA lin@ is not a%ailable, because this function is only supported locally on the P',CIE;S. Config"ring the P,<PC Interfa'eD /hen the S#,D2ID* access point is set to an Industrial *thernet or a TCP+IP interface, the 2ife2ist 9Scan9 function in the SIMATIC Manager can only be e?ecuted on a P',CIE;S lin@ connected with &/ Config. In order to implement these functions on P',CIE;S networ@s as well, please set the S#,D2ID* access point in the 9Set P<3PC interface9 program to a Profibus module first. The tab 9Diagnostics9 =in the de%ice ob.ect properties> is only a%ailable in the process de%ice plant %iew.

* * * * * *

* The P<+PC interface may not be set to 9PC3internal9 when communicating %ia * *
P',CIE;S. In order to reset this setting, please open the application 9Set P<+PC interface9 and select the interface configuration, e.g. CP-!"" =P',CIE;S>. ,nly one person can access &/ Config from within a pro.ect. It does not matter whether only one, or multiple S# stations are to be configured =please see the readme notes on using PCS#>J ,SD i portD De%ices inserted into the &/ config %ia <SD import can be edited in PDM. To do this, the option 9configure with PDM9 has to be selected in the &/ config Properties. In addition, these de%ices must be inserted in the Plant or Detwor@ beforehand and the ob.ects must be selected from the opened Insert dialog bo? in the &/ config. Due to the reorgani1ation of the de%ice import =the au?iliary program 9De%iceInstall9 no longer e?ists>, you ha%e to reinstall all de%ices in your pro.ects %ia the 9SIMATIC PDM Manage De%ice Catalog9 function after ha%ing e?ecuted an upgrade or a new installation of SIMATIC PDM !.". Fou can find the De%ice Integration manual =only *nglish> on CD in the directory 9De%iceIntegration9 =de%iceintegration.chm>. Fou must not import 9SIMATIC PDM *?port9 files which were created in &/ Config into the Detwor@ iew. If you start 2ifelist from the PDM application anf if you want to sa%e the scan result in the corresponding pro.ect you must close the PDM application, because otherwise errors concerning disabled ob.ects may be displayed. /hen synchroni1ing pro.ects from -.? to !.", not all older ob.ects of the type 9P',CIE;S DP Detwor@9 and 9P',CIE;S 2in@9 without subordinate de%ices, are not deleted in the networ@ %iew. These ob.ects could, but do not ha%e to be, deleted manually. These ob.ects are not counted as tags for the software license re8uirements. The CP; has to be in ST,P when writing the IPM data =module names, for e?ample> to the &A'T modules = !*S# (("3#TC??34AE4 and !*S# (($3!TC??34AE4 >, otherwise the connection will be interrupted. See also the section on IPM identification data in the manual *T $44M distributed I+, de%ice, *T$44M &A'T analog modules. Cor communication with &A'T de%ices older than re%ision ! downstream from &A'T multiple?ers %ia the &CC &A'T ser%er, please ensure that the parameters for the TA< length in both PDM and the &CC &A'T ser%er ha%e been set appropriately before the first QlearnQ operation. If the default setting of the &A'T ser%er =TA< length ($ characters> is retained, the setting Q;se of RmessageS as Rlong TA<S with &A'T re%ision 0 !T must be selected in PDM. If you do not wish to use the RmessageS as Rlong TA<S with &A'T re%ision 0 ! in PDM, a TA< length of 5 characters must be set in the &CC &A'T ser%er.

* * * *

1=

>o"r Conta't &Not 9or The D;M7 Version(

* Uuestions regarding SIMATIC ST*P # + PCS# + &ardware, SIMATIC PDM
problems with S# communication: SI*M*DS A< Customer Support D364)#- DVrnberg http:++www.siemens.com+automation+ser%icePsupport *mail: techsupportWad.siemens.de

* Uuestions regarding de%ices and <SD files:

Please consult the support of the de%ice manufacturer =see also list 9Integrated De%ices9>. Fou can find this information on the D D 9De%ice 2ibrary "+$4""9 in the directory AManuals. Fou can obtain reinstallations and further information on SIMATIC PDM on the Internet at the following address http:[email protected]+pdm