Scribd
Upload
27 views

"Wearable Zigbee Based Guidance System For Blind": Guided By: Remya K V

This document describes a wearable zigbee-based guidance system for the blind that combines ultrasound and GPS scheduling. It includes block diagrams of the power supply, microcontroller, GPS, RS232, ultrasonic sensor, and logic level converter components. The objective is to design a circuit to provide guidance to visually impaired individuals using ultrasound for nearby object detection and GPS for navigation. Component specifications and schematics are provided.

Uploaded by

Anju Jose
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
27 views

"Wearable Zigbee Based Guidance System For Blind": Guided By: Remya K V

This document describes a wearable zigbee-based guidance system for the blind that combines ultrasound and GPS scheduling. It includes block diagrams of the power supply, microcontroller, GPS, RS232, ultrasonic sensor, and logic level converter components. The objective is to design a circuit to provide guidance to visually impaired individuals using ultrasound for nearby object detection and GPS for navigation. Component specifications and schematics are provided.

Uploaded by

Anju Jose
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 18

WEARABLE ZIGBEE BASED GUIDANCE SYSTEM FOR BLIND

ANAS P A [ AMAKEEE003]

GUIDED BY: REMYA K V

ANJU JOSE VITHAYATHIL [AMAKEEE005] ARJUN C [AMAKEEE007] ATHIRA C R [AMAKEEE010] SIDHEEQUL AKBAR P[AMAKEEE054]

OBJECTIVE
Combined scheduling of ultrasound and GPS in a wearable zigbee based guidance system for the blind.

BLOCK DIAGRAM:

POWER SUPPLY
BLOCK DIAGRAM:

SCHEMATIC DIAGRAM:

TRANSFORMER:
(0-230V) to (0-9V).

RECTIFIER:

FILTER:

IC REGULATOR:

1.Input 2.Ground 3.Output

We uses IC 7805.

LCD

Pin Diagram of KS 0066

Pin Description: Pin No 1 2 3 4 Function Ground (0V) Supply voltage; 5V (4.7V 5.3V) Contrast adjustment; through a variable resistor Selects command register when low; and data register when high 5 6 7 8 9 10 11 12 13 14 15 16 Backlight VCC (5V) Backlight Ground (0V) 8-bit data pins Low to write to the register; High to read from the register Sends data to data pins when a high to low pulse is given Read/write Enable DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 Led+ LedName Ground Vcc VEE Register Select

ATMEGA162V

B L O C K

D I A G R A M

GPS
Third generation POT. Provides standard NMEA0183 strings in raw mode for any micro controller. High sensitivity and tracking capabilities .
SPECIFICATIONS:

Supply: 3.3V, 45mA. Chipset: MTK MT3318. Protocol message support: GGA, GSA, RMC, VTG. No. of Satellite simultaneously tracked: 51. Tracking Sensitivity: On-module antenna : -157 dBm.

RS232
Schematic Description:

RS-232 is a standard for serial binary data interconnection between a DTE (Data terminal equipment) and a DCE (Data Circuit-terminating Equipment).

ULTRASONIC SENSOR

Features Supply Voltage 5 VDC Supply Current 30 mA typ; 35 mA max Range 2 cm to 3 m (0.8 in to 3.3 yrds) Input Trigger positive TTL pulse, 2 uS min, 5 s t yp. Echo Pulse positive TTL pulse, 115 uS to 18.5 ms Echo Hold-off 750 s from fall of Trigger pulse

CIRCUIT DIAGRAM

LOGIC LEVEL CONVERTER:

CONCLUSION
Studied the block diagram. Designed the circuit diagram. Detailed study of components.

You might also like