Scribd
Upload
197 views

Study On The Button Holing Machine

The document describes a study on a button holing machine. It provides specifications of the machine, including its maximum sewing speed of 3600 stitches per minute, the ability to make buttonholes between 6.4-19.0 mm in length, and uses between 1-14 needle sizes. It also lists the major parts of the button holing machine, such as the motor, pulleys, belts, needle, bobbin, and safety guard.

Uploaded by

Anonymous zd5HPB5
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
197 views

Study On The Button Holing Machine

The document describes a study on a button holing machine. It provides specifications of the machine, including its maximum sewing speed of 3600 stitches per minute, the ability to make buttonholes between 6.4-19.0 mm in length, and uses between 1-14 needle sizes. It also lists the major parts of the button holing machine, such as the motor, pulleys, belts, needle, bobbin, and safety guard.

Uploaded by

Anonymous zd5HPB5
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 12

Expt. No: 03 Date of Performance: 01.06.

09

Study on the Button Holing Machine

1. Introduction: 2. Objectives: 3. Machine Used: Brand: Model: Country of Origin:

4. Specification of Button Holling Machine:


i.

Application: Button holing for ordinary cloth, knit etc. ii. Sewing Speed: Maximum 3600 spm. iii. Button Hole Length: 6.4 ~ 19.0 mm (1/4 ~ ). iv. Bartacking width: 2.5 ~ 4.0 mm (3/32 ~ 5/32).

v.

Needle: DP X 5 # 11 J ~ # 14 J. vi. Pressure Lift: 12 mm (15/32). vii. Lubrication: Standard machine lubricating oil.

5. Different Parts of Button Holling Machine:

Motor Motor Pulley Machine Pulley Belt (V-belt & Flat belt) Belt Tensioning Device. Needle Bobbin

Thread Guide Spring Tensioner (Tension Disc & Tension Nut) Winder Knife Knife Bar Thread Cutter Spur Gear

Throat Plate Safety Guard

Pinion
Thread Take-up Lever etc.

6. Precaution:

7. Remarks/Comments:

8. Conclusion:

Expt. No: 04 Date of Performance: 01.06.09

Study on different types of Seam and their Production

1. Superimposed Seam 2. Lapped Seam 3. Bound Seam 4. Decorative Seam 5. Flat Seam 6. Edge neatening Seam 7. Same as Lapped 8. Like as Lapped

You might also like