Scribd
Upload
2K views

Piping Commodities: 1 Pipe

The document provides a detailed list of piping commodities used in industrial projects. It includes pipes, fittings, flanges, gaskets, bolts, nuts, valves, and special parts like strainers, steam traps, flame arresters, rupture discs, bellows, and nozzles. Specific items are categorized based on material, dimensions, connections, function, and other attributes. The list covers piping system components from ASME, ASTM, API and other standards.

Uploaded by

Dhakshina K
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2K views

Piping Commodities: 1 Pipe

The document provides a detailed list of piping commodities used in industrial projects. It includes pipes, fittings, flanges, gaskets, bolts, nuts, valves, and special parts like strainers, steam traps, flame arresters, rupture discs, bellows, and nozzles. Specific items are categorized based on material, dimensions, connections, function, and other attributes. The list covers piping system components from ASME, ASTM, API and other standards.

Uploaded by

Dhakshina K
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

PIPING COMMODITIES

1 PIPE (ASME B 36.10, ASME B 36.19)


1.1 SEAMLESS 1.2 EFW 1.3 ERW

2 FITTINGS (FORGED ASME B 16.11, WROUGHT FITTING ASME B 16.9)


2.1 ELLBOW 2.1.1 SHORT RADIUS (ASME B 16.28) NOW COVERED IN ASME B 16.11 2.2 REDUCER 2.2.1 CONCENTRIC 2.2.2 ECCENTRIC 2.3 CAP 2.4 COUPLINGS 2.4.1FULL COUPLINGS 2.4.2 HALF COUPLINGS 2.5 SWAGES (MSS-SP-95) 2.6 NIPPLES (ASTM A733) 2.7 STUB ENDS (ASME B 16.9/MSS-SP-43) 2.7.1 LONG PATTERN 2.7.2 SHORT PATTERN 2.8 UNIONS 2.9 TEES 2.9.1 EQUAL TEE 2.9.2 REDUCING TEE 2.9.3 LATERAL TEE 2.10 OLET FITTINGS (MSS-SP-97) 2.10.1 SOCKOLET 2.10.2 WELDOLET 2.10.3 THREADOLET 2.10.4 LATEROLET 2.10.5 NIPPOLET 2.10.6 FLANGOLET 2.10.7 SWEEPOLET

3 FLANGES
UPTO 24 NPS AMSE B 16.5 26NPS TO 60NPS ASME B 16.47 Sr. A (EARLIER MSS-SP-44) ASME B 26.47 Sr. B (EARLIER API 605) 4NPS 144NPS AWWA C-207 ABOVE THAT TAYLOR FORGE 3.1 BASED ON TYPE 3.1.1 WELD NECK (WN) 3.1.2 SLIP ON (SO) 3.1.3 SOCKET WELDED (SW) 3.1.4 LAP JOINT (L J) 3.1.5 THREADED (TE) 3.1.6 BLIND (BF)

3.2 BASED ON FACING 3.2.1 RAISE FACE (RF) 3.2.2 FLAT FACE (FF) 3.2.3 MALE FEMALE (MF) 3.2.4 TONGUE & GROOVE (T&G) 3.2.5 RING TYPE JOINT (RTJ) 3.3 BASED ON TYPE OF SEERATION 3.3.1 CONCENTIRC 3.3.2 SPIRAL 3.4 BASED ON FACE FINISH (MSS-SP-6/ASME B 16.41) 3.4.1 SMOOTH FINISH 3.4.2 SEERATED FINFISH 3.4.3 STOCK FINISH

4 GASKETS
4.1 METTALIC GASKET (ASME B 16.20) 4.2 NON METTALIC GASKET (ASME 16.21) 5 BOLT & NUTS (ASME B 16.5) 5.1 BOLT (ASME B 18.2.1) 5.2 NUT (ASME 18.2.1) 6 SPACER & BLANKS (ASME B 16.48)

7 VALVES
DESIGN STD ASME B 16.34 TESTING STD API 598 7.1 GATE VALVE 7.1.1 FORGED (API 602) USED IN SMALL BORE 7.1.2 CAST VALVE (API 600) USED IN LARGE BORE 7.2 GLOBE VALVE 7.2.1 FORGED (BS 5352) 7.2.2 CAST VALVE (BS 1873) 7.3 CHECK VALVE 7.3.1 FORGED LIFT TYPE (BS 5352) 7.3.1.1 PLUG TYPE 7.3.1.2 BALL TYPE 7.3.2 SWING TYPE (BS1868) 7.3.3 DUAL PLATE CHECK VALVE (API 594) 7.3.3.1 WAFER TYPE 7.3.3.2 LUG TYPE 7.3.3.3 DOUBLE FLANGE TYPE 7.4 BALL VALVE 7.4.1 BASED ON BODY 7.4.1.1 SINGLE PIECE 7.4.1.2DOUBLE PIECE 7.4.1.3THREE PIECES 7.4.2 BASES ON BORE 7.4.1.1 FULL PORT 7.4.1.2 REGULAR PORT 7.4.1.3 REDUCED PORT

7.4.3 BASED ON MOUNTED 7.4.3.1 FLOATING BALL 7.4.3.2 TRUNION MOUNTED BALL 7.4.4 BASED ON SEATING 7.4.4.1 SOFT SEATED 7.4.4.2 METAL SEATED 7.5 BUTTERFLY VALVE (API 609) 7.5.1 BASED ON ECCENTRICITY 7.5.1.1 CONCENTRIC (API 609 CATEGORY A) ALWAYS SOFT SEATED 7.5.1.2 DOUBLE ECCENTRIC (API 609 CATEGORY B) SOFT SEATED (TSO) OR METAL SEATED 7.5.1.3 TRIPLE ECCENTRIC (API 609 CATEGORY B) ALWAYS METAL SEATED 7.5.2 BASED ON TYPE OF SEATING 7.5.2.1 SOFT SEATED 7.5.2.2 METAL SEATED 7.5.3 BASED ON TYPE 7.5.3.1 WAFER TYPE 7.5.3.2 LUG TYPE 7.5.3.3 DOUBLE FLANGE TYPE 7.6 PLUG VALVE (API 599) 7.6.1 LUBRICATED 7.6.2 NON LUBRICATED 7.7 DIAPHRAM VALVE (BS 5156) 7.7.1 STRAIGHT PATTERN 7.7.2 WIER TYPE PATTERN 7.8 NEEDLE VALVE (BS 5352) 7.9 PISTON VALVE 7.9.1 FLUSH BOTTOM PISTON VALVE 7.9.2 RAM TYPE PISTON VALVE 7.9.3 KINGER TYPE PISTON VALVE FOR STEAM SERVICE

8 SPECIAL PARTS
8.1 STRAINER 8.1.1 Y TYPE STRIANER 8.1.2 T TYPE STRIANER 8.1.3 BASKET TYPE STRIANER 8.2 STEAM TRAP 8.2.1 THERMODYNAMIC (TD TRAP) (FOR PIPING LOOPS) 8.2.2 INVERTED BUCKET (IB TRAP) (FOR MEDIUM TO HIGH CONDESATE LOAD) 8.2.3 BALL FLOAT TRAP (USED AS PROCESS TRAP FOR HIGH CONDENSATE LOAD) 8.2.4 THERMOSTATIC STEAM TRAP (FOR STEAM TRACING LINES) 8.2.4.1 FILLED CAPSULE TYPE 8.2.4.2 BIMETALLIC

8.3 FLAME ARRESTER (CEN 12874) 8.3.1 END LINE (TOP OF ATMOSPHERIC STORAGE TANK) 8.3.2 IN THE LINE (NEAR TO THE SORCE OF IGNITION L/D 20) 8.3.3 DETONAION TYPE (AWAY FROM THE SOURCE L/D > 20) 8.4 RUPTURE DISC (ASME SEC (8) VIII) 8.4.1 TENSION TYPE 8.4.2 REVERSE BUCKLING TYPE 8.4.3 FLAT NON METALLIC DISC FOR FLUCTUATING LOAD 8.5 BELLOWS (EJMA) 8.5.1 SINGLE BELLOW 8.5.2 DOUBLE BELLOW 8.5.3 UNIVERSAL BELLOW 8.5.4 UNIVERSAL TIED BELLOW 8.5.5 HINGED BELLOW 8.5.6 GIMBLE 8.5.7 PRESSURE BALANCE BELOW 8.6 SIGHT GLASS 8.6.1 FLIP TYPE 8.6.2 FLOAT TYPE 8.7 HOSE 8.7.1 METALLIC 8.7.2 NON METALLIC 8.8 HOSE COUPLING 8.8.1 QUICK COUPLING 8.8.2 QUICK RELEASE COUPLING 8.8.3 THREADED COUPLING 8.8.4 FLANGE COUPLING 8.8.5 CAM LOCK COUPLING 8.9 SAMPLE COOLER 8.10 SPRINGS 8.11 SPRAY NOZZLES 8.11.1 SOLID CONE (SCRUBBING, DE-SUPER HEATING, MIXING) 8.11.2 JET (IN LINE MIXING CLEANING) 8.11.3 CURTAIN (TO PROVIDE WATER CURTAIN ARROUND THE VESSEL AGAINST FIRE HAZARD) 8.11.4 FOG (FOR HUMIDITY CONTROL) 8.12 SAFETY SHOWER & EYE WASHER 8.13 SPECIAL IN SPEC ITMES 8.13.1 SPECIAL PIPE 8.13.2 SPECIAL ELLBOW 8.13.3 SPECIAL TEE

You might also like