Scribd
Upload
170 views

BJT VDB Problems With Answers

This document contains 5 questions regarding voltage divider biasing circuits for bipolar junction transistors (BJTs). Question 1 asks to calculate collector current (IC) and collector-emitter voltage (VCE) for 3 circuits. Questions 2-5 ask to design voltage divider biasing circuits for specific operating conditions, providing the component values needed for each circuit.

Uploaded by

Rana Faheem Zahid
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
170 views

BJT VDB Problems With Answers

This document contains 5 questions regarding voltage divider biasing circuits for bipolar junction transistors (BJTs). Question 1 asks to calculate collector current (IC) and collector-emitter voltage (VCE) for 3 circuits. Questions 2-5 ask to design voltage divider biasing circuits for specific operating conditions, providing the component values needed for each circuit.

Uploaded by

Rana Faheem Zahid
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

VDB Problems

Q-1: Find IC & VCE in the following circuits. Assume = 100. (a)
+15V

R2 10k

RE 1k

R1 30k

RC 1k

(IC = -3 mA, VCE = -9 V) (b)


+10V

R2 10k

RE 1k

R1 30k

RC 1k

-10V

(IC = -4.1 mA, VCE = -11.8V)

(c)
+10V

R1 100k

RC 1k

R2 25k

RE 1k

-10V

(IC = 2.83 mA, VCE = -14.34V)

Q-2: Design a single supply (+15 V) PNP based stable voltage divider biasing so that IC = -3 mA VCE = -5 V and |IERE| = 2 V. Assume = 100. Draw the circuit diagram showing the component values. (RE = 666 , RC = 2.66 K, R1(b/w base & ground) = 35.6 K, R2 = 8.2 K) Q-3: Design a dual supply (10 V) PNP based stable voltage divider biasing so that IC = -3 mA VCE =-5 V and |IERE| = 2 V. Assume = 100. Draw the circuit diagram showing the component values. (RE = 666 , RC = 4.3 K, R1(b/w base & - VEE) = 47.6 K, R2 = 7.7 K) Q-4: Design a single supply (+15 V) NPN based stable voltage divider biasing so that IC = 1 mA VCE = 5 V and |IERE| = 2V. Assume = 100. Draw the circuit diagram showing the component values. (RE = 2 K, RC = 8 K, R1(b/w +VCC & base) = 107.5 K, R2 = 24.6 K) Q-5: Design a dual supply (10 V) NPN based stable voltage divider biasing so that IC = 5 mA VCE = 10 V and IERE = 2 V. Assume = 100. Draw the circuit diagram showing the component values. (RE = 400 , RC = 1.6 K, R1(b/w +VCC & base) = 7.7 K, R2 = 47.6 K)

You might also like