Logo Design Guide

Arts & Letters Corporation

Arts & Letters Logo Design

Preface
Design is a slippery subject. Much of good design is a matter of taste, and tastes, like fashions, change. But leaving out the question of fashion in design, some tastes are better than others. You would expect someone who has studied design and has created what others consider good design to have better taste in design than the ordinary person. But some ordinary people have better design taste than others. How do they achieve this better design sense? By observation, simple observation. We are surrounded by examples of good design; all we have to do is take the time to look closely at what we take for granted. Many commercial artists maintain files of designs that they like; you can do something similar. Take a few minutes to thumb through magazines. Cut out examples of logos that appeal to you and study them before you begin to create your own logo. For example do Black & Decker and Calvin Klein use such a simple typeface in their logos? Why do Coca-Cola and Del Monte use more ornate designs?

There are no firm answers to either of those questions. In general, sans serif typefaces have a more contemporary feel, while the look that Coca-Cola and Del Monte are striving for is traditional. Once you begin to get a feel for what appeals to you and figure out why you like it, you will find that creating a logo of your own is much easier than you ever thought possible.

Important Notice: The corporate logos included in this Users Guide are trademarks of the respective companies. They are provided only as examples, and you should contact the companies regarding the use of their marks in any cooperative advertising or joint promotional activities. The sample logos provided in electronic format are subject to the same guidelines. They are provided so that you can display them on screen to view the logos in color and to test the principles discussed in the Users Guide relative to the appearance of the logos at various sizes. The inclusion of these logos does not grant you any rights to use them except in accordance with the guidelines available from the respective companies.

Arts & Letters Logo Design

Contents
Chapter 1: Design Considerations ................................................... 4 Signature ..................................................................................... Mark ........................................................................................... Wordmark................................................................................... Checklist for a Good Mark ......................................................... 4 5 6 7

Chapter 2: Creating a Logo ............................................................. 8 Creating a Logo Using Clip Art ................................................. 8 Using the Designs, Patterns, and Icons ................................... 12 Chapter 3: Designing a Letterhead ............................................... 17 Paper ......................................................................................... MessageArea............................................................................ Type in the Letterhead ............................................................. Envelopes .................................................................................. 17 18 18 20

Chapter 4: Designing a Business Card .......................................... 22 Calling Cards ........................................................................... Business Cards ......................................................................... Media & Message ..................................................................... Checklist for a Good Business Card ........................................ 22 22 23 23

Chapter 5: Designing a Product Label .......................................... 26 Allied Beverages Ice Mountain Soft Drinks ............................ 26 Designing a Wordmark ............................................................ 26 Creating a Product Label ......................................................... 27 Chapter 6: Protecting Your Logo ................................................... 30 Definitions ................................................................................ What Is a Trademark? .............................................................. How Can Someone Establish Rights? ...................................... Applications ............................................................................. Searches for Conflicting Marks ................................................ Further Filing Information ....................................................... Patent & Trademark Depository Libraries .............................. 30 30 31 31 32 32 33

Appendix A: Design Examples ...................................................... 35

Arts & Letters Logo Design

Chapter 1: Design Considerations

Arts & Letters EXPRESS is one of several vector graphics programs with all the tools you need to create a logo perfectly suited to you and your business. As we impled in the introduction,logo is a general term. In our discussion of design, we will use the more specific terms signature, mark, and wordmark. Many of the examples we utilize to illustrate definitions or good design principles are those of established companies. These logos are registered and are the property of the companies and products represented. They are included in the logo collection to be used as examples of successful logo design or for use when personalizing proposals and communications with any of the companies. Study these familiar logos as you formulate your own design ideas. While you shouldnt imitate them, you should imitate the principles behind their design.

Signature
A signature is the name of a company or an individual set in a distinctive style of type. Distinctive, however, does not mean trendy or faddish. Imagine how dated a business would look today if it had chosen in the late-sixties to use psychedelic lettering in its signature:

Not only does the sixties-era typeface look dated, it never really had anything to do with the company it was supposed to represent. Tools are angular and hard; the typeface is soft and fluid. A good signature suggests something about the company. Sometimes the designer of a company signature achieves a distinctive look by beginning with an appropriate typeface, then personalizing it. It doesnt matter if another designer chooses to use that typeface; the personal touch makes the companys signature different. Arthur Andersen & Company, starts with a face perfect for a financial company one that is classic and conservative.A distinctive touch is achieved with the swash extension of the ampersand, a feature not to be found in the original typeface.

Quaker makes a similar change by extending the tail of its Q. In addition, the basic typeface is quite distinctive, tieing together nicely with the pleasantly chubby Quaker gentleman that is its mark.

Arts & Letters Logo Design

Nestle uses two personalizing touches: a swash extension to what would be the serif of its capital N and a variation of the accent mark on the final e. The accent mark echoes and continues the swash extension of the N.

Using swash letters is not the only way to personalize a typeface; you can also freeform and edit key letters. Note how RCA alters the R and the A to make them appear to mirror each other.

Mark
A mark is a graphic design used to represent a company. Marks generally suggest something about their makers, but the connection is not always readily apparent. For example, the connection between Shell Oil and its mark is obvious to any consumer, but the meaning of Ralston Purinas checkerboard design is less clear. (It is, however, a measure of the power of association and the strength of a good mark that the checkerboard design says Purina to most consumers.) No matter how closely linked a mark is to its maker, it is always simple and graphically strong. Examples of well-designed, graphically strong marks include those of Ralston Purina, Shell Oil, United Way, Quaker, Motorola, and Brunswick.

Arts & Letters Logo Design

One way in which a company can gain for its mark the kind of identification that Ralston Purina has with its checkerboard is to link its mark with its signature. If the public sees the two together often enough, eventually the signature can be dropped and the mark will stand on its own. A companys signature and mark are often used together, with detailed corporate rules for their display, but each can stand alone to symbolize the company. Examples of the signature-mark combination include those of Brunswick, Motorola, Nestle, and Quaker.

Wordmark
A wordmark is a graphic design that incorporates the name of the company into the design. When a mark-and-signature combination is broken apart into a mark and a signature, both still clearly represent the company, but when a wordmark is broken apart, one of the pieces loses its identification with the company. Examples of the wordmark are Oscar Mayer, Phillips 66, NCR, and Sun. In each case, if the company name or its initials (NCR) are separated from their graphic, the effect is completely different and less effective. The Phillips 66 wordmark, for example, becomes Phillips 66 and a shield shape losing the clever play on the route 66 highway sign.

Arts & Letters Logo Design

Checklist for a Good Mark

There are several characteristics of a good mark that you should consider in judging your own mark. A good mark design should be: 1. Original and distinctive. Many companies use the shape of the state of Texas as the basis of their marks. Some of the ways in which they have made their design distinctive are by employing heavy lines on the outline, using a solid interior, and placing their initials within the state (making it a wordmark).

2. Legible. A good test of the legibility of a design is to print it at the size it will be used, tape the design to a wall, and take a few steps back. Can you still tell what it is? What happens to your mark as you enlarge or reduce it? The thin lines in a mark designed for stationery may look weak if the mark is enlarged to fit on the side of a truck, and vice versa. Keep in mind the possible uses for your mark. 3. Simple. Unless you are trying for a somewhat old-fashioned feel, make your mark as simple and abstract as possible. Ralston Purinas checkerboard and Quakers Friend are two examples of simple, memorable marks. But Nestles bird nest, while old-fashioned in the complexity of its illustration, projects perfectly the organizations tradition and stability. 4. Memorable. A memorable mark is one that is striking and easy to remember. Simplicity is the key; think of Shell Oil Companys yellow scallop shell. 5. Easily associated with the company. It is harder for a consumer to associate a heart shape than a tool shape with a hardware store. This is not to say that you cant use a mark that seemingly has no connection with the business; after all, the stag that represents John Deere has nothing to do with tractors and everything to do with the companys name. In addition, a good mark should: 6. Make wise use of color. Printing in a color other than black increases the cost of printing, and the more colors involved, the greater the expense. One way to economize is to use screens or percentages of a single color instead of multiple colors. Products such as EXPRESS allow you to convert a logo design with multiple colors into shades of gray automatically. You can lighten or darken individual elements to balance the contrast and preview the design as it will appear when printed in a single color. The preview is an important step, because certain colors change dramatically when screened as a percentage of the base color. For example, red becomes pink, which may be unacceptable. 7. Project the image of the company . The mark of an accounting firm should be more conservative than that of a graphic design company. An avant-garde mark will not project the stability that an accounting firm wants; a staid mark may not project the innovative feel that a graphic design company needs. After you have considered the design principles utilized by established companies and read the checklist for a good mark, you can proceed with the design of your own.

Arts & Letters Logo Design

Chapter 2: Creating a Logo

Arts & Letters EXPRESS gives you the tools you need to create a successful logo design: hundredsof basic designs, patterns, icons and design examples (shown in Appendix A), over 250 corporate logos in full color (see Logos in the Clip-Art Manager), and this guide. Well look first at designing a logo using a clip-art symbol; then well show you how to use the graphic elements and designs included with EXPRESS to create a logo. (You can, of course, combine any clip art with the graphic elements and designs.)

Creating a Logo Using ClipArt

Lets design a logo for Mercury Couriers. Mercury Couriers is a business delivery service, and the name was chosen by the owner to suggest speed and dependability. (Mercury was the Roman messenger-god, often depicted as wearing winged sandals and winged helmet.) The first image that occurs is that of Mercury running. One reason that this image might come to mind is that it is a well-known mark, that of FTD Florists. Although a business delivery service and florists are two different businesses, the owner of the image of Mercury running might not be pleased to see its image being used by another business. But the suggestion of swiftness that Mercury carries, so desirable to a delivery service, is too good to let go. What about a side view of Mercurys head, with his winged helmet for identification? Again, that image has been used by a large firm, Ford Motor Company, as the mark for its Mercury automobiles. Although Ford hasnt actively used this mark for many years, it is probably easier to continue thinking than to chance trademark infringement. What about a top view of the helmet? Add symbol number 21233 to see how it looks:

Its an interesting graphic as it is, but it doesnt look much like a helmet until we size it nonproportionally, by clicking and dragging on the bottom middle point handle. Suddenly, we have what could be a top view of Mercurys helmet.

Arts & Letters Logo Design

In addition to being a top view, it looks different from both of the other well-known trademarks: more ornate, larger wings. The empty area in the center of the helmet looks like a good place to put the companys name, Mercury Couriers, and thus create a wordmark.

Just putting the words into the open space might work, but the words seem rather small. In addition, they are arranged in a strictly linear fashion (horizontal), whereas the rest of the mark is nonlinear all curves. With a little work, we could make the arrangement of the company name echo the curves of the mark. Using EXPRESS advanced tools, we can curve the text to fit within the confines of the helmets circle. Heres how: 1. Add a circle symbol from the Shapes flyout and size it to fit within the helmets circle.

2. With the circle still selected, choose Convert to Freeform from the Draw menu. The circle is no longer a symbol but a freeform object, which means that it can be broken apart. 3. With the circle still selected, choose Freeform/Text Edit from the Draw menu. Notice that the interior color disappears, leaving just the outline of the circle with four points showing.

Arts & Letters Logo Design

10

4. Select the Split tool from the Toolbox. The cursor changes to the Split tool. Split the circle at its left and right points. Now you have two arcs that fit perfectly within the empty circle in Mercurys helmet.

5. Now type the word Mercury. Choose Modern Medium from the Custom Type dialog box and Centered alignment. Open the Spacing dialog box and choose greater values for letterspacing, to space the letters out. Repeat the process for Couriers.

6. Block select Mercury and the upper arc.

7. Pull down the Effects menu and choose Bind to Shape . In the Bind-to-Shape dialog box, choose Top for placement and deselect

Arts & Letters Logo Design

11

Show Shape. Click on OK, and EXPRESS binds Mercury to the upper arc.

8. Repeat the process for Couriers and the bottom arc, this time choosing Baseline for orientation. Click on OK.

Couriers is upside-down. The reason it is upside-down has to do with the direction in which the bottom arc is being drawn. When both arcs were one circle, that circle was being drawn from the point farthest to the left (that we used to guide the Split tool) clockwise. When the circle was split into two arcs, each arc continued to draw clockwise, which is why Couriers is upside-down. If you look at the orientation of both words, it makes sense. But it doesnt make a very good wordmark. Fortunately, it can be fixed. 9. Ungroup Couriers and its arc; select the arc. Pull down the Draw menu and select Reverse Points Order. Choosing this option with the arc selected will cause the arc to draw counterclockwise. 10.Bind Couriers to the arc again. Now the word is oriented correctly, and we have an improved wordmark for Mercury Couriers.

Arts & Letters Logo Design

12

Using the Designs, Patterns and Icons

See Logo Designs, Patterns and Icons in the Clip-Art Manager or print a copy of these libraries using the Clip-Art Viewer. Many of the patterns consist of repeating elements, which can be broken apart if you wish to use just one of the repeated shapes. Hundreds of other design elements are included with Arts & Letters EXPRESS; you will find them in the Clip-Art Manager under the Design categories. Some of the patterns may appear too dense when used at a small size. There are two ways to control this density: One is to turn the element white and place it on a solid background; the other is to stretch the shape non-proportionally:

The icons in the Logo Icons library can be used to make simple, forceful logos or graphics quickly. For example, combining the icon of a house (symbol 25225) with a suitable typeface produces a nice notice for an open house:

The icon of a leaf (symbol 26207) could be used to create a logo for a nursery, and symbol 26198 (duplicated, flipped, and enclosed in a rectangle with rounded corners) could become a logo for a cat breeder:

Arts & Letters Logo Design

13

Using EXPRESS design elements is easy. The only difficult part is deciding which effect out of all the choices is correct for your logo. Lets create a logo for an enterprising company named Global. An design obvious solution would be to pair the companys name with a globe of some sort.

The result isnt very exciting. What happens if we create a wordmark by making Global all-caps and replacing the letter o with the globe?

The design looks better, but the globe itself is wrong. Its too detailed; when this wordmark is reduced to the size necessary for reproducing on stationery or business cards, the continents will lose their detail and fill in with ink. In addition the typeface, which is Classic Medium, looks rather weak to carry such a powerful name as Global. This is where having over ninety typefaces and a wide variety of design elements are useful. While EXPRESS does provide icon representations of a globe that could be used instead of the realistic clipart globe, well go further and create a completely abstract globe. First, we add the pattern shown below (symbol 21169), then place a simple circle on top of it. Select both the circle and the design element and choose Merge from the Effects menu. Choose Clipping Path and specify no outline by clicking the appropriate box. Click on OK.

The design element is clipped in the shape of a circle and becomes an abstract representation of a globe.

Arts & Letters Logo Design

14

Because diagonals are more dynamic than horizontals, well rotate the globe slightly, and before substituting it for the o, well choose a more imposing typeface, Modern Heavy.

There are two ways you can make such a substitution for a letter. You can either freeform the text and delete a letter, or you can actually have two text objects, GL and BAL, aligned with each other, and maneuver the globe into place by hand. The resulting wordmark is modern-looking, and if Global were a computer chip manufacturer, the logo would be perfect. (Note how the lines in element 21169 suggest the pins that secure chips to boards.) Using a clipping mask on EXPRESS Logo Patterns is a useful tool. You can make a simple teardrop shape (symbol 2598) into something more, simply by choosing the right pattern (in this case, symbol 21219).

Place the teardrop over the element and clip it. (If you think that the clipped shape is too indefinite, you can specify that the outline show.) Add type and you have an attractive logo.

Another use for the clipping mask is to achieve a two-tone effect with text, as shown below:

Arts & Letters Logo Design

15

Another use for the clipping mask is to achieve a two-tone effect with text, as shown below:

First, add your text.

Next, duplicate the text object and align the copy with the original. You can do this two ways. You can use the Transform dialog box to specify Make Duplicate, and this will create a copy directly on top of the original (no other alignment necessary). You can also simply make a duplicate using the Duplicate tool, then block select the two text objects and align them using the Arrange menu. Place a rectangle over half of the text, and with the rectangle still selected, select one copy of the text by using Shift + Click.

Now you have a text object and a rectangle selected. Pull down the Effects menu and select Merge. Choose Clipping Path and specify no outline by clicking the appropriate box. Click on OK.

The text is clipped and appears as above.

Arts & Letters Logo Design

16

Note that you will actually have two objects that need to be grouped, so that they arent accidentally misaligned: a text object and a mask group. Before you group them, however, you can select and color either object to make the contrast in color as striking as you want. You could stop at this point and have an interesting text effect, but well finish the effect by adding the contrasting rectangles. Add a rectangle the color of the bottom half of the text.

Send the rectangle to the back.

Repeat the process for the second rectangle and maneuver the two into alignment with each other.

For more design examples, see Appendix A.

Arts & Letters Logo Design

17

Chapter 3: Designing a Letterhead

There are two basic elements of a letterhead: your logo and your identification (which includes name, address, and telephone number).

Some letterheads include such information as company officers at the bottom of the paper. Your logo is included in the letterhead because you want it to be identified with you; your address and phone number are included for obvious reasons. Since you have already designed your logo, creating business stationery will be relatively easy. When you created your logo, you designed it to project an image, and stationery is an important component of projecting that image. Every time you correspond with someone, your stationery must carry the image successfully, present you as favorably as possible. What you write is important, of course, but how it looks is almost as important. How impressed would you be to receive a bid for your business that was typed on blue-lined, hole-punched notebook paper?

Paper
Business stationery is available in various colors and textures, and most have matching envelopes and card stock. Before you make your choice, you should consider the following: The most common, conservative, color for business stationery is white. But white is a good choice for reasons other than the safety of conformity: colored inks (if you wish to use them in your mark and signature) look their best on it, and the contrast between the black letters in your typing is the most extreme and legible possible. Second to white is cream, and the same reasons for choosing it apply. Cream is a good choice for someone who wishes to avoid the stark coolness of white, to add a little warmth to the appearance of their communications. Light gray is third in popularity to white and cream. It avoids the starkness of white, without adding the warmth of cream. You may consider other colors, but keep in mind your image. Hot-pink stationery would not be appropriate for an accounting firm, but for a party-supply store, it might be perfect. Before choosing a colored stationery, however, remember the color of your logo. If your logo uses red ink and you intend to print your stationery using colored ink, your red logo will appear washed out on hot-pink paper. On the other hand, if you can change the color of your logo (for your stationery) to print with blue or black ink, the hot-pink stationery would probably work.

Arts & Letters Logo Design

18

Athough stationery is available in many textures, if your mark and signature use complex, fine lines, you should steer away from textured papers. Textured paper, because of the tiny hills and valleys that make up its surface, does not allow fine detail to be reproduced. Smooth papers with a minimum of texture will work better. If, on the other hand, your mark and signature use rather bold lines, you are not so limited. Choose a texture that is consistent with your image. There are textured papers which simulate bamboo that might be appropriate for a business dealing with oriental imports; others with rigidly geometric shapes might be appropriate for engineering firms.

Message Area
Since business communications are rarely handwritten, you must consider how your printer (whether a typewriter, dot-matrix printer, or laser printer) will image your letter on your stationery. This area can be can be referred to as the message area. The usual margins for a typewritten business letter are one-inch to one-and-a-half inches left, right, top, and bottom. Of course, since your letterhead will include information that is usually typed (name and address of sender), you do not have to allow space for it. In well-designed letterhead, the name, address, and mark appear in relation to the message area in the letter, not to the piece of paper alone. In other words, if you customarily use margins of one-anda-half inches when you type correspondence, your letterhead will look more a part of the entire message if it also begins and ends one-and-a-half inches from the left and right edges of the paper. If it begins and ends one inch from the edges of the paper, the relationship between it and the message will not be as close. On the other hand, if your letterhead spans the entire width of the paper, it will appear to be independent of the message typed below it, and the relationship spoken of above does not apply.

Type in the Letterhead

A common mistake seen in many letterheads is that the type is too large. If your letterhead intrudes too much into the message area, not only will your letterhead appear overpowering, it will limit how much you can type on your stationery. A good rule of thumb is to limit any type in your letterhead to the range of 8 to 12 points. Unless your logo is simply a mark (graphic design), you must be aware of the harmony between the type used in your logo and that used in your letterhead. Harmony is a subjective thing; compare the following variations of a signature-mark combination and letterhead.

1.

2.

Arts & Letters Logo Design

19

3.

None of the combinations are objectionable, but the first and last probably work best. Why? In number 1, the typefaces are recognizably from the same family (Modern Heavy and Modern Medium); they go together. In number 2, however, the letterhead type is close to that of the logo, but not quite the same; it looks like a mistake, as if the creator meant to duplicate the logotype but selected the wrong typeface. In number 3, the typefaces are intentionally different, which establishes the logo as distinct from the letterhead type; a different effect, but just as harmonious. Another related consideration is what typeface you will ordinarily use in writing letters. The rule of number 3, above, is probably your best strategy here. If you normally use a serif face to type your letters, a sans serif face in the letterhead may be better. This allows the necessary separation between the body of the letter and the letterhead, which introduces it.

Another way to achieve the separation between body and letterhead is to italicize or slant the letterhead.

Another, less satisfactory way to make the body copy and letterhead agree would be to use the same typeface in each. This is less satisfactory because there will always be some variation between the two in size or placement.

Arts & Letters Logo Design

20

As you design your letterhead, keep in mind your business cards. The two should resemble each other, both using the same logo and type.

Envelopes
For consistencys sake, the design elements you have created for your stationery should be used on your envelope. Sometimes, as in the Sunnyside Company example above, the logo and address combination will be the wrong shape or size for an envelope. Using the Sunnyside Company letterhead design on an envelope without altering its size or the placement of its elements would result in a top-heavy, overlarge return address.

A quick solution would be to eliminate the mark and alter the companys name to appear as the first line of the address. The typeface will maintain a harmony between the letterhead and envelope.

Arts & Letters Logo Design

21

Another simple solution, which would allow the use of the signature-mark combination, would be to place the address under it. The designer who opts for this solution might want to reduce the size of the signature-mark somewhat to avoid the appearance of too much printing on the corner of the envelope.

Arts & Letters Logo Design

22

Chapter 4: Designing a Business Card

Calling Cards
Calling cards were the precursors of business cards. They were the same size as todays business cards, but all that was engraved in the center of the card was the owners name. Not only was ones address not included, the name of ones business was never included.

Ones calling card was presented at the door when one called upon a friend or acquaintance. A servant would carry the card on a small silver tray to the person being visited, and that person would decide whether to receive the guest.

Business Cards
Business cards are sometimes used like calling cards, but their object is usually commerce, rather than conversation.

Businessmen and businesswomen exchange cards in offices, at social gatherings, at professional meetings; they give them to secretaries and clients; they drop them in fishbowls at restaurants and pin them to community bulletin boards. The hope is that perhaps out of this welter of tiny pieces of card stock, some business will be generated. And that hope is realized often enough to make business cards a business necessity. Business cards are always approximately 2" x 3". Anything larger and they will not fit in the numerous devices for filing business cards (including wallets); anything smaller and they tend to get lost. But the materials on which business cards can be printed are numerous and allow for a great deal of originality!

Arts & Letters Logo Design

23

Media & Message

In their quest to be different, to have their business cards stand out from all the rest, people have been extremely inventive. Materials on which business cards have been printed include wood veneer (for a lumber company), thin plastic, and metal (usually aluminum). Using such materials does make a business card stand out. Unusual surface treatments have included photographs (sometimes of the bearer, sometimes of a product or an office), 3-D images and holograms, and mirror-like Mylar finishes. Sometimes the logo is embossed into ordinary card stock; sometimes the card is die cut in an unusual pattern. The message printed on business cards varies widely. Some businesses prefer to present their logo, name, and address with the bearers name and phone number. Others add the companys slogan, a list of products, or a list of services that the business performs. Some add a joke or thought for the day on the reverse side of the card. The orientation of the message varies as well. Traditionally, the printed matter reads so that the card is held horizontally, but many business prefer a vertical orientation.

Some skew their type and logo at an angle across the card. Rather than strive for an unusually-designed card, some people use a very simple means of insuring that their card will stand out in a stack of cards: they turn down one corner of the card before they give it away.

Checklist for a Good Business Card

Arts & Letters EXPRESS gives you all the tools you need to create a business card that is perfectly suited to you and your business. There are, however, several points you should consider before you begin. 1. If you are including your logo, make sure that it is large enough to hold detail but small enough not to overwhelm everything else. With a field to work in of 2" x 3", you must strike a balance between the size necessary for your logo to be recognizeable and leaving sufficient room for the rest of the information you wish to present.

Arts & Letters Logo Design

24

2. Be sure your type size is legible. Be sure that you keep the size of your type large enough to be readily legible: point size 8 for a sans serif face; point size 9 for a serif face. Be wary, however, of rising above point size 10 for any part of your message. 3. Avoid using too little letterspacing. Words with very little space between their letters look all right at larger point sizes (10 and above), but when they are printed in small sizes, the individual letters may touch and bleed into each other, blurring your message.

You can use the controls in the Custom Type dialog box to adjust the spacing between letters and words. 4. Know that thermography is not good for detailed work. Thermography is raised (or relief) printing done using plasticized ink that is heated so that it puffs up. It resembles the more costly process of engraving and is often used on invitations and business cards to add a touch of class. A limitation of thermography is that serif faces in small sizes tend to lose their serifs, and artwork with fine lines tends to block up. In short, the amount of fine detail that thermography can reproduce is much less than that of traditional printing (or true engraving).

If you keep these limitations in mind, you can work around them and use thermography.

Arts & Letters Logo Design

25

5. Match media to message. While a party supply shop could print business cards on bright plastic or mylar, a lawyer should not. The most ordinary, conservative, safe medium for a business card is the card stock that matches your business stationery. (Most types of stationery have envelopes and business card stock that match.) White and ecru are the most common card stock colors, and black and dark blue are the most common ink colors for business cards. This not to say that you cannot have fun with your business cards, just that you consider how well they match your business image. 6. Be wary of time-sensitive information. Because of the expense involved in printing business cards (and letterhead), be careful what information you give. Which will last until you have used most of your 500 minimum cards: your street address or a P.O. box number? Is there a chance that you many drop one of the services you are putting on your card? (Sometimes it is easier to leave details off than to spend time later marking through items that no longer apply.) The sample cards shown below illustrate a few of the many ways a logo can be used as part of a business card.

Phillips Designs

Arts & Letters Logo Design

26

Chapter 5: Designing a Product Label

Once you have designed your logo, letterhead, and business cards, it will not be difficult to design a label for your product. After all, most labels incorporate the logo (or trademark) of their maker, and you already have yours. The type that you use in your label could be the same as that in your signature (or a variation of it). What will concern you mostly will be the positioning and relative size of these elements. The design of a part of your label may be out of your hands. For example, if you are required by the government to incorporate certain information, such as a list of ingredients, you may find that the list must conform to a standard design.

Allied Beverage Ice Mountain Soft Drinks

A Dallas-based soft drink company, Allied Beverage, used Arts & Letters to design both the logo for its Ice Mountain soft drink line and the product label for its orange-flavored soda. Ralph Deal, a partner in Allied Beverage, did the design work, but before he could begin, he had to first learn how to use a computer. Ralph points to the ease of learning and using Arts & Letters , saying If I can do it, anyone can.

Designing a Wordmark
For the Ice Mountain logo, Ralph chose to create a wordmark. First, to symbolize the eventual scope of the Ice Mountain line, he used a globe symbol, one showing only latitude and longitude lines (#4037). Rather than use the globe as it was, Ralph sized it nonproportionately and tilted (rotated) it slightly. In general, horizontal and vertical lines are static, while diagonal lines are dynamic. By rotating the globe, Ralph gave it a certain amount of dynamism, a suggestion of movement.

Next, he created snow-capped mountains, using Arts & Letters drawing tools, and placed those mountains on the North Pole of the globe.

Arts & Letters Logo Design

27

He then added the text Ice Mountain, selecting Classic Medium for the typeface and italics for the style. Again, italicizing (or tilting) the letters gives the words a more dynamic feel. Using the Spacing dialog box of the Text Attributes menu, he specified a Condense/Extend value of 50%, which made Ice Mountain appear to be more narrow than normal. Ralph wanted the initial caps (capitals) of the two words to be larger and more substantial than the rest of the letters. To do so, he freeformed the text and altered the I and M to return them to their original dimensions, then enlarged them. To give the letters a three-dimensional effect, he duplicated the letters and used Arts & Letters drawing tools to connect them. (He might have found using Extrude easier.)

After grouping all the letters, he tilted (rotated) them to the same angle as he had the globe, then fit them to the center of the globe. The result comprised his wordmark logo.

Creating a Product Label

Ralph knew the dimensions of the soft drink can upon which the label would be printed, and he knew how much of the cans surface would be live area, the part of the can that the design would cover. The live area, a rectangle measuring approximately 8" x 4", formed his canvas. Part of his canvas was already accounted for: he had to list the ingredients in his soda, and he had to give the liquid measure of the contents. To continue the Ice Mountain theme of his logo, Ralph decided to create ice-capped mountains that would run the length of the live area. Using Arts & Letters Bezier curve and line tools, he first created the mountain peaks. Next, he created the ice caps, following the upper contours of the peaks, then dropping into the bodies of the peaks to suggest crevasses. He added accents along the perimeter of the ice caps.

Arts & Letters Logo Design

28

Knowing that the bottoms of the ice caps would be covered by other design elements, Ralph left them as horizontal lines rather than waste time drawing something that would not show in the final product.

He decided to color the mountains blue, and since the flavor of the soda was to be orange, he colored the background orange. Ralph decided that merely coloring the background of the can orange was not enough. To give consumers a concrete suggestion of the cans contents, he added an image of oranges from the ClipArt Manager.

Since he planned to reproduce the image of the oranges at a fairly large size, and since they would be so integral to his design, Ralph freeformed the image and modified it, giving the face of the orange greater detail. He added the word orange, again using Classic Medium and altering it to make it similar in treatment to Ice Mountain in the wordmark. Knowing that his canvas would be wrapped around a cylinder (the soft-drink can), he duplicated the word and placed both copies so that orange could be seen from either side of the can. After making a copy of the words Ice Mountain from the wordmark, he rotated it 90 degrees and added it to the composition. Several other blocks of text were included in the design: list of contents, the name and address of his company, registration marks, and a public-spirited recycling message. The final label design appeared this way:

Arts & Letters Logo Design

29

The soda cans themselves appeared this way:

Arts & Letters Logo Design

30

Chapter 6: ProtectingYour Logo

Logos should be original and distinctive. You dont want to accidentally design a logo similar to that of another company, because you dont want your businesses to be confused by the consumer. If, however, the Westgate Oil Exploration Company and the Derrick Cafe both use an oil derrick symbol in their logo, there should be no confusion of the two. If you are designing a logo for a local business, it probably wont matter if your design is similar to that for another business in another geographical area. If, however, you are designing a logo for a company with a larger area of operations, or you think you may someday trade nationally, you should consider registering your logo.

Definitions
This chapter consists chiefly of pertinent excerpts from Basic Facts About Trademarks, a publication of the U.S. Government Printing Office (October 1992). The definitions it uses vary somewhat from those we gave in Chapter 1. Again, the definitions used in this book are: Logo: The general term for the more specific terms signature , mark, or wordmark. Signature : The name of a company or individual set in a distinctive style of type. Mark: A graphic design used to represent a company. Signature + Mark: Displaying a companys signature next to its mark. Wordmark: A graphic design that incorporates the name of the company into the design. Where we feel clarification of the words of the U.S. Government is useful, we will preface our remarks with the heading Comments.

What Is a Trademark?
A trademark is either a word, phrase, symbol or design, or combination thereof, which identifies and distinguishes the source of the good or services of one party from those of others. A service mark is the same as a trademark except that it identifies and distinguishes the source of a service rather than a product. The terms trademark and mark are used to refer to both trademarks and service marks whether they are word marks or other types of marks.

Comments
This means that to the government, a logo is the same thing as a trademark or service mark depending on what the company it represents does. The logo is a trademark if the companys product is a good; it is a service mark if the companys product is a service. In other words, because Quaker sells oats, its signature is a trademark; but since Arthur Andersen & Company sells financial services, its signature is a service mark. Quakers mark is a trademark; United Ways mark is a service mark. Whether the government considers the logo you have designed to be a trademark or service mark depends upon what you are selling.

Arts & Letters Logo Design

31

How Can Someone Establish Rights?

Trademark rights arise from either (1) actual use of the mark, or (2) the filing of a proper application to register a mark in the Patent and Trademark Office (PTO) stating that one has a bona fide intention to use the mark in commerce regulated by the U.S. Congress. Federal registration is not required to establish rights in a mark. However, federal registration can secure benefits beyond the rights acquired by merely using a mark. For example, the owner of a federal registration is presumed to be the owner of the mark for the goods and services specified in the registration, and to be entitled to use the mark nationwide. There are two related but distinct types of rights in a mark: the right to register and the right to use. Generally, the first party who either uses a mark in commerce or files an application in the PTO has the ultimate right to register that mark. The PTOs authority is limited to determining the right to register. The right to use a mark can be more complicated to determine. This is particularly true when two parties have begun use of the same or similar marks without knowledge of one another and neither has a federal registration. Only a court can render a decision about the right to use, such as issuing an injunction or awarding damages for infringement. It should be noted that a federal registration can provide significant advantages to a party involved in a court proceeding. The PTO cannot provide advice to parties concerning rights in a mark. Only a private attorney can provide such advice. Unlike copyrights or patents, trademark rights can last indefinitely if the owner continues to use the mark to identify its goods and services. The term of a federal trademark is 10 years, with 10-year renewal terms. However, between the fifth and sixth year after the date of initial registration, the registrant must file an affidavit setting forth certain information to keep the registration alive. If no affidavit is filed, the registration will be canceled.

Comments
It isnt necessary to register your logo with the PTO. Just using it to represent yourself and your goods and services establishes it as your logo. However, if someone else begins using a logo similar to yours, and you want them to stop using it, being able to point to a federal registration of your logo is advantageous.

Applications
An applicant may apply for federal registration in three principal ways. 1. An applicant who has already used a mark in commerce may file based on that use (a use application). 2. An applicant who has not yet used the mark may apply based on a bona fide intention to use the mark in commerce (an intent to use application). For purposes of obtaining federal registration, commerce means all commerce which may lawfully be regulated by the U.S. Congress; for example, interstate commerce or commerce between the U.S. and another country. The use in commerce must be a bona fide use in the ordinary course of trade, and not made merely to reserve a right in a mark. Use of a mark in promotion or advertising before the product or service is actually provided under the mark on a normal commercial scale does not qualify as use in commerce.

Arts & Letters Logo Design

32

3. Under certain international agreements, an applicant may file in the U.S. based on an application or registration in another country.

Searches for Conflicting Marks

An applicant is not required to conduct a search for conflicting marks prior to applying with the PTO. However, some people find it useful. In evaluating an application, an examining attorney conducts a search and notifies the applicant if a conflicting mark is found. However, the application fee, which covers processing and search costs, will not be refunded even if a conflict is found and the mark cannot be registered. To determine whether there is a conflict between two marks, the PTO determines whether there would be likelihood of confusion; that is, whether relevant consumers would be like to associate the goods or services of one party with those of the other party as a result of the use of the marks at issue by both parties. The principal factors to be considered in reaching this decision are the similarity of the marks and the commercial relationship between the goods and services identified by the marks.To find a conflict, the marks need not be identical, and the goods and services do not have to be the same. The PTO does not conduct searches for the public to determine if a conflicting mark is registered, or is the subject of a pending application, except as noted above when acting on an application. However, there are a variety of ways to get this same type of information. 1. Performing a search in the PTO public search library, located on the second floor of the South Tower Building, 2900 Crystal Drive, Arlington, Virginia 22202. 2. Performing a search at a patent and trademark depository library. (See end of chapter.) 3. Retaining a private trademark search company or an attorney who deals in trademark law.

Further Filing Information

Information about filing for federal trademark registration and the forms themselves can be obtained online by visiting: http://www.uspto.gov All trademark-related correspondence filed by mail, except for requests to record documents in the Assignment Services Division, requests for copies of trademark documents, and certain documents filed under the Madrid Protocol should be addressed to: Commissioner for Trademarks P.O. Box 1451 Alexandria, VA 22313-1451 In addition, inquiries can be serviced by calling 1-800-786-9199 or 703-308-HELP (4357) for general trademark and patent information which includes 24-hour technical & genneral support. Services are available 24 hours a day, 7 days a week.

Arts & Letters Logo Design

33

Patent & Trademark Depository Libraries

The following is a list of libraries where you can conduct your own search for trademark conflicts (and possibly save yourself $210).You may wish to call the above number to see if a library has opened in your area since this list was compiled. State Library AL Ralph Brown Draughon Library, Auburn .. ................................ Birmingham Public Library ....................................................... AK Anchorage: Loussac Public Library.......................................... AZ Tempe: Noble Library, Arizona State University ........................ AR Little Rock: Arkansas State Library........................................... CA Los Angeles Public Library ....................................................... Sacramento: California State Library, Courts Bldg. .................. San Diego Public Library .......................................................... San Francisco Public Library ................................................... Sunnyvale Public Library .......................................................... CO Denver Public Library ............................................................... CT Hartford Public Library .............................................................. DE Newark: University of Delaware Library ................................... DC Washington: Founders Library, Howard University .................. FL Fort Lauderdale: Broward County Main Library ........................ Miami-Dade Public Library ....................................................... Orlando: University of Central Florida Libraries ........................ Tampa: Tampa Campus Library, Univ. of South Florida ........... GA Atlanta:Georgia Institute of Technology .................................... HI Honolulu: Hawaii State Public Library ....................................... ID Moscow: University of Idaho Library ......................................... IL Chicago Public Library ............................................................. Springfield: Illinois State Library ................................................ IN Indianapolis-Marion County Public Library ............................... West Lafayette: Siegesmund Engineering Library, Purdue...... IA Des Moines: State Library of Iowa ............................................ KS Wichita: Ablah Library, Wichita State University ....................... KY Louisville Free Public Library .................................................... LA Baton Rouge: Troy H. Middleton Library, LSU .......................... ME Orono: Raymond H. Fogler Library, University of Maine........... MD College Park: Eng. & Phys. Science Library, Univ. of MD ........ MA Amherst: W.E.B Du Bois Library, Univ. of Mass. ...................... Boston Public Library ............................................................... MI Ann Arbor: Media Union Library, University of Michigan ............ Big Rapids: (FLITE), Ferris State University ............................ Great Lakes Patent and Trademark: Detroit Public Library ...... MN Minneapolis Public Library ........................................................ MS Jackson: Mississippi Library Commission ............................... MO Kansas City: Linda Hall Library ................................................ St. Louis Public Library ............................................................. MT Butte: Montana Tech. Library: University of Montana ................ Telephone 334/844-1737 205/226-3620 907/562-7323 602/965-7010 501/682-2053 213/228-7220 916/654-0069 619/236-5813 415/557-4500 408/730-7300 720/865-1711 860/695-6300 302/831-2965 202/806-7252 954/357-7444 305/375-2665 407/823-2562 813/974-2726 404/894-1395 808/586-3477 208/885-6584 312/747-4450 217/782-5659 317/269-1741 765/494-2872 515/242-6541 800/572-8368 502/561-8617 225/578-8875 207/581-1678 301/405-9157 413/545-2765 617/536-5400, ext. 2226 734/647-5735 231/591-3602 313/833-3379 612/630-6000 601/961-4111 816/363-4600, ext. 724 314/241-2288, ext. 390 406/496-4281

Arts & Letters Logo Design

34

State Library NE NV NH NJ NM NY Lincoln: Eng. Library, Univ. of Nebraska-Lincoln ...................... Las Vegas: Clark County Library District ................................. Reno: University of Nevada-Reno Library ................................ Durham: Univ. of New Hampshire Library ................................ Newark Public Library .............................................................. Piscataway: Library of Science & Medicine, Rutgers .............. Albuquerque: Centennial Science and Engineering, U of NM ... Albany: New York State Library, Cultural Education Center ..... Buffalo and Erie County Public Library..................................... Science, Industry and Business Library, NY Public Library ..... Rochester: Central Library of Rochester and Monroe Cty. ...... Melville Library, Room 1101, SUNY at Stony Brook .................. Charlotte: University of North Carolina ..................................... Raleigh: D. H. Hill Library, North Carolina State University ....... Grand Forks: Chester Fritz Library, Univ. of North Dakota ....... Akron: Akron-Summit County Public Library ............................ Cincinnati and Hamilton County Public Library ........................ Cleveland Public Library ........................................................... Columbus: Ohio State University ............................................. Dayton: Wright State University ................................................ Toledo/Lucas County Public Library ......................................... Stillwater: Edmon Low Library, Oklahoma State University ...... Paul L. Boley Law Library, Lewis & Clark College .................... Philadelphia, The Free Library of .............................................. Pittsburgh, Carnegie Library of ................................................. University Park: Paterno Library, Penn State Univ. ................... Providence Public Library......................................................... Clemson: R.M. Cooper Library, Clemson University ................ Devereaux Library, South Dakota School of Mines and Tech. . Stevenson Science & Engineering Library, Vanderbilt Univ. ..... Austin: McKinney Engineering Library, ECJ 1.300, UT ............. College Station: TIP2, Texas A& M University ........................... Dallas Public Library ................................................................ Houston: Fondren Library,- MS 225, Rice University ............... Lubbock: Texas Tech University Library ................................... San Antonio Public Library........................................................ Salt Lake City: Marriott Library, University of Utah .................... Burlington: Baily/Howe Library University of Vermont ............... Richmond: Cabell Library, Virginia Commonwealth Univ. ........ Seattle: Engineering Library, Univ. of Washington .................... Morgantown: Evansdale Library, West Virginia Univ. ............... Madison: Wendt Library, Univ. of Wisconson-Madison ............ Milwaukee Public Library .......................................................... Cheyenne: Wyoming State Library ...........................................

Telephone 402/472-3411 702/507-3421 775/784-6500, ext.257 603/862-1777 973/733-7779 732/445-2895 505/277-4412 518/474-5355 716/858-8900 212/592-7000 585/428-8110 631/632-7148 704/687-2241 919/515-2935 701/777-4888 330/643-9075 513/369-6971 216/623-2870 614/292-3022 937/775-3521 419/259-5209 405/744-7086 503/768-6786 215/686-5331 412/622-3138 814/865-6369 401/455-8027 864/656-3024 605/394-1275 615/322-2717 512/495-4500 979/458-1819 214/670-1468 713/348-5483 806/742-2282 210/207-2500 801/581-8394 802/656-2542 804/828-1104 206/543-0704 304/293-4695, Ext. 5113 608/262-6845 414/286-3051 307/777-7281

NC ND OH

OK OR PA

RI SC SD TN TX

UT VT VA WA WV WI WY

Appendix A: Design Elements

Appendix B: Designs

Appendix C: Icons

Appendix D: Design Examples