HVAC+Valves+and+Actuators+Catalogue+07 2011
HVAC+Valves+and+Actuators+Catalogue+07 2011
Issue:July 2011
Schneider Electric The Single Source for all your Valve and Actuator Needs
This catalogue presents the comprehensive HVAC Valve and Actuator portfolio from Schneider Electric Buildings. By dealing with one trusted supplier, our customers save time and cost, fully confident of the quality, performance, compatibility, and value for money of the items they buy. For further details of the products featured please refer to the relevant data sheets on the Schneider Electric website at www.schneider-electric.com/buildings.
www.schneider-electric.com/buildings
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
4
4
6 MZ18A
6 MZ 18B
Globe Valves
Globe Valve Overview V241 Connections V241 V211T VZ V212T VZX V211 V212 VGS211F 15-100CS (VG211) VG221F 65-150C (VG222) V222 V231 V232 V292 V341 Connections V341 MZ V311T MZX V311 VG311F 65-150C (VG321) V321
8 MR90 10 MZ09B 11 MZ09L 12 13 Buttery Valves 14 VF208W 25-200NS & 100-200NZ 15 16 Buttery Valve Actuators 17 MF20 / MF20-R / MF40 18 19 Shoe Valves 20 VTRE 21 MB 22 MBF 23 24 Rotary Shoe Valve Actuators 25 EM9/M9B 26 RM and XRM 27 28 29 Damper Actuators 30 Non-Spring Return 31 MD5A, MD10A, MD20A, MD40A MD5B, MD10B, MD20B, MD40B
46
46 47 47
48
48
49
49
50
50 51 51
52
52 52
54 54
54 55
Forta: M310, M400, M800, M1500 and M3000 32 MV15B 34 Forta MG900 SR 35 Forta M700 - Spring Return 36 AVUX, AVUM, AVUE 37 M22, M50 38
32
LF24, LF230, LF24-SR MD10 SR MD20 SR Mechanical Accessories Electrical Accessories
56 56
56 57 58 59 59
40 Appendix
40
41
41
Water Valve Sizing Chart Steam Valve Sizing Chart New Type Designation Guide
60
60 61 62
Notes
63
2011 Schneider Electric. All rights reserved.
42
42
43
43 44
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
Ball Valves
VB210R, VB200R & VB310R, VB300R
The new ball valves utilise a low friction packing design around the ball which enables a low torque and compact motor to be used in the actuator. A pop top connection between the valve and actuator provides a fast and easy installation. VB210R and VB310R ball valves incorporate a flow characterizing insert to providing an equal percentage flow characteristic with high rangeability. Suitable for control of hot or chilled water applications. Actuators are available in both spring return and non-spring return versions for floating and proportional control.
Valve bodies
Servicea
Hot and chilled water, up to 60% glycol. PN40. -7 to 120C. 895 kPa Two-Way; 480 kPa, Three-Way 205 kPa normal operation, 135 kPa psi quiet operation. ANSI class IV (0.01%) Rp threaded Forged UNC 37700 brass. Stainless steel anti-blow out stem with dual Viton o-rings. 304 Stainless steel PTFE. Glass-lled PEEK.
Pm Seat Leakagec End Connections Body Material Stem Material Ball Material Seat Material Characterized Insert
a. Not rated for steam service. b. Close-off is dened as the maximum allowable pressure drop to which a valve may be subjected while fully closed. c. Seat Leakage in normal direction of ow only
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
Operating Temperature Range (at media temp. limits). Floating 0 to 60 C Proportional 0 to 60 C Two-Position 0 to 76C Humidity 5 to 95% relative humidity, non-condensing. IP31. Enclosure Rating (Horizontal and Vertical Mounting)
Two-Position Actuators
Part Number Type Designation Spring Return Action (Valve Normal Position) Normally Open Normally Closed Stroke Time, sec. 50/60 Hz Spring Return Time, sec. 50/60 Hz 35 VA @ 24V AC/DC Power Consumption AC/DC 2.3/1.6 W
MB6-SO-24T MB6-SC-24T
50 sec.
3.5/1.8
a. No Time-out feature. Controller must provide time-out after 3 minutes on time. b. Size transformer for each spring actuators at 10VA
2011 Schneider Electric. All rights reserved.
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
Globe Valves
Globe Valves
Globe valves are the ideal plant room control valve. They deliver the best controllable flow of any proportional valve. The Venta range of valves have excellent rangeability, low leakage and a robust stem sealing. The crown plug is self cleaning in design and is the consultants choice of control valve.
2-way
PN16
PN25
DN15-50
DN65-150
DN15-50
DN65-150
V241
P10
VG221F
P19
V231
P21
V292
P23
Vz
P13 (high P)
V222
P20
(balanced)
V232
P22
(compact actuators)
VZX
P12
(bubble tight)
V211T
P12
(balanced)
V212T
P14
V211
2011 Schneider Electric. All rights reserved.
P16
VGS211F
(high temp.)
P18
(balanced)
V212
P17
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
Globe Valves
Steam
3-way
2-way
PN16
200C(PN16)
DN15-50
DN65-150
DN15-100
V341
P24
VG311F
P30
VGS211F
P18
Mz
P26
(SS trim)
V321
P31
V311T
P27
Key
Flange connection
(Compact Actuators)
MZX
P28
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
10
Globe Valves
V241
The V241 is a high quality general purpose valve. Polished stainless seats provide high differential pressure capability and low leakage. Suitable for a wide range of applications such as heating, cooling, air handling and domestic hot water systems. The valve can handle hot and cold water with phosphate, hydrazine and antifreeze additives. If the valve is used for media at temperatures below 0 C (32 F), it should be equipped with a heater in order to prevent ice formation on the valve stem.
Design Pressure class Flow characteristic Stroke Rangeability (Kvs/Kv min) Leakage Pm Max. temperature of medium Min. temperature of medium Max. glycol/concentration Connection
2-way plug valve, stem up closed PN 16 Equal percentage modied 20 mm See table up to 0.02% of Kv 600 kPa, water 150C -20C 50% Materials Body Plug and seat Stem Stem packing Bronze Rg5 Stainless steel SS 2346 Stainless steel SS 2346 EPDM
V241
Max Close-off Pressure kPa Non Spring Return Actuators DN 15 15 15 15 15 15 15 20 25 32 40 50 Connection G1B G1B G1B G1B G1B G1B G1B G1B G1B G2B G2B G2B Kvs 0.25 0.40 0.63 1.0 1.6 2.5 4.0 6.3 10 16 25 38 Rangeability >50 >50 >50 >50 >50 >50 >50 >100 >100 >100 >100 >100 M310 300N 1000 1000 1000 1000 800 800 800 650 400 300 150 50 M400 400N 1000 1000 1000 1000 800 800 800 650 500 350 250 150 M800 800N 1600 1600 1600 1600 1600 1600 1600 1500 1150 850 600 400 M1500 1500N 1600 1600 1600 1600 1600 1600 1600 1600 1600 1350 950 650 MV15B 1500N 1600 1600 1600 1600 1600 1600 1600 1600 1600 1350 950 650 Spring Return M700 700N 1600 1600 1600 1600 1400 1400 1400 1100 850 650 450 300 MG900 SR 900N 1600 1600 1600 1600 1600 1600 1600 1510 1160 855 605 415
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
11
DN
Materials
Union nut: malleable iron casting, galv. Union end: malleable iron casting, galv. Packing, standard: Fibre Gasket (Klingersil C4400) or Packing, spec: PTFE Gasket (Kingersil Top Chem 1,5mm)
15 20 25 32 40 50
* The accessory intended for the primary circuit of district heating connections.
d2
AA2
Part no. for connection, one pkg/port Packing, std 911-2101-015 911-2101-020 911-2101-025 911-2101-032 911-2101-040 911-2101-050 Packing, spec.* 911-2104-015 911-2104-020 911-2104-025 911-2104-032 911-2104-040 911-2104-050
DN 15 20 25 32 40 50
mm 15 22 28 35 42 54
Materials
Union nut: malleable iron casting, galv. Union end: Bronze, SS 5204 Packing, standard: Fibre Gasket (Klingersil C4400) or Packing, spec: PTFE Gasket (Kingersil Top Chem 1,5mm)
* The accessory combination intended for the primary circuit of district heating connections.
Part no. for connection, one pkg/port Packing, std 911-2102-015 911-2102-020 911-2102-025 911-2102-032 911-2102-040 911-2102-050 Packing, spec.* 911-2105-015 (1) 911-2105-020 (1)
2011 Schneider Electric. All rights reserved.
DN 15 20 25 32 40 50
Materials
Union nut: Packing, standard: Malleable iron casting, galv. or Packing, Spec: Brass Union end: malleable iron casting, galv. Packing, standard: Fibre Gasket (Klingersil C4400) or Packing, spec: PTFE Gasket (Kingersil Top Chem 1,5mm)
(1) Material Union nut: brass SS 5252 * The accessory Combination intended for the primary circuit of district heating connections. 2 sets of connections required for 2 way valves
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
12
Globe Valves
V211T
The V211T is an internally threaded valve with a soft seat for tight shut off. Suitable for a wide range of applications such as heating, cooling and air handling systems with hot or chilled water. If the valve is used for media at temperatures below 0 C, it should be equipped with a heater in order to prevent ice formation on the valve stem.
Design Pressure class Flow characteristic Stroke Rangeability (Kvs/Kv min) Leakage Pm Max. temperature of medium Min. temperature of medium Max. glycol concentration Connections
2-way plug valve, stem up closed PN 16 Equal percentage modied 20 mm >50 Tight sealing 400 kPa, water 120C -20C 50% Internal pipe thread Rp
Materials Body Stem Plug Seat Sealing Seat Stem packing Nodular iron EN-JS 1030 Stainless steel SS 2346 Brass CW602N EPDM Nodular iron EN-JS 1030 EPDM
Max Close-off Pressure kPa V211T Non Spring Return Actuators M310 300N 721-1716-000 721-1720-000 721-1724-000 721-1728-000 721-1732-000 721-1736-000
2011 Schneider Electric. All rights reserved.
Spring Return MV15B 1500N 1600 1600 1600 1600 1600 1350 950 650 M700 700N 1400 1400 1400 1100 850 650 450 300 MG900 SR 900N 1600 1600 1600 1510 1160 855 605 415
Part number
DN
Connection
Kvs
Rangeability
M400 400N 800 800 800 650 500 350 250 150
M800 800N 1600 1600 1600 1500 1150 850 600 400
M1500 1500N 1600 1600 1600 1600 1600 1350 950 650
15 15 15 20 25 32 40 50
Rp Rp Rp Rp Rp 1 Rp 1 Rp 1 Rp 2
721-1740-000 721-1744-000
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
13
The VZ valve is a general purpose valve with the and sizes having a soft seat for tight shut off. Suitable for a wide range of applications such as heating, cooling, air handling and domestic hot water systems. They may be used with steam with a maximum gauge pressure of 140Kpa.
Design Pressure class Flow characteristic Stroke and valves Stroke 1 to 2 valves Rangeability (Kvs/Kv min) Leakage and valves Leakage 1 to 2 valves
2-way plug valve, stem up closed PN 16 Equal Percentage 9.5mm 15.9mm >50 tight sealing <0.1% 120C 2C
Max. glycol concentration Connections Materials Body Stem Plug Sealing Seat Stem packing
Bronze: Leaded Gunmetal BS1400 LG2 Stainless steel BS970 Grade 303 S42 Copper Alloy BS2874 CZ132 or BS2871 CZ110 Gland O Ring Integral with body PTFE Chevrons
Max Close-off Pressure kPa VZ Non Spring return M8001 Part number Size (inches) Kvs Rangeability 800N VZ1401 VZ1402 VZ1403 VZ1404 VZ1451 VZ2501 VZ2551 VZ2601 VZ2651 1 1 1 2 0.2 0.5 1 2.1 4.2 8.3 12.5 21 33 50 50 50 50 50 50 50 50 50 1600 1600 1600 1600 1600 1262 755 533 312 700N 1600 1600 1600 1600 1600 1262 755 533 312 900N 1600 1600 1600 1600 1600 1300 775 550 320
2011 Schneider Electric. All rights reserved.
(1) Use Linkage Kit L2SV (2) Use Linkage Kit L7SV
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
14
Globe Valves
V212T
The V212T is an internally threaded balanced valve requiring only minimal actuator force, coupled with a soft seat and good rangeability the V212T provides very energy efficient control of hydronic applications. If the valve is used for media at temperatures below 0 C, it should be equipped with a heater in order to prevent ice formation on the valve stem. Suitable for a wide range of applications such as heating, cooling and air handling systems with hot or chilled water.
Design Pressure class Flow characteristic Stroke Rangeability (Kvs/Kv min) Leakage Pm
2-way pressure balanced plug valve, stem up closed PN 16 Equal percentage modied 20 mm >50 Tight sealing 400 kPa, water 120C -20C -20C Internal pipe thread Rp
Materials Body Stem Plug Seat Sealing Seat Stem packing Nodular iron EN-JS 1030 Stainless steel SS 2346 Brass CW602N EPDM Nodular iron EN-JS 1030 EPDM
Max Close-off Pressure kPa V212T Non Spring Return Actuators M400 400N 800 750 700 600 M800 800N 1600 1600 1600 1600 M1500 1500N 1600 1600 1600 1600 MV15B 1500N 1600 1600 1600 1600 Spring Return M700 700N 1600 1600 1600 1600 MG900 SR 900N 1600 1600 1600 1600
Part number
DN
Connection
Kvs
Rangeability
25 32 40 50
Rp 1 Rp 1 Rp 1 Rp 2
10 16 25 38
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
15
The VZX valve utilises a compact actuator for installations with limited space. Suitable for a wide range of applications such as heating, cooling and air handling systems with hot or chilled water.
Design Pressure class Flow characteristic Stroke Rangeability (Kvs/Kv min) Leakage Max. temperature of medium Min. temperature of medium Max. glycol concentration Connection
2-way plug valve PN 16 Equal Percentage 12.7mm >50 <0.1% of Kvs 120C 2C 25% Screwed BSP to BS21 (Rp)
Materials Body Stem Plug SeatSealing Seat Stem packing Bronze: Leaded Gunmetal BS1400 LG2 Stainless steel BS970 Grade 303 S42 Copper Alloy BS2874 CZ132 or BS2871 CZ110 Gland O Ring Integral with body PTFE Chevrons
Note: only suitable for operation by AVUX, AVUM and AVUE actuators.
Max Close-off Pressure kPa VZX Non Spring Return Actuators Part number VZX4404 VZX4451 VZX4501 VZX4551 VZX4601 VZX4651 Size (inches) 1 1 1 2 Kvs 2.1 4.2 8.3 12.5 21 33 Rangeability 50 50 50 50 50 50 AVUE5304 (1) 220N 1180 720 340 200 120 60 AVUE5354 (2) 220N 1180 720 340 200 120 60 AVUX5202 220N 1180 720 340 200 120 60 AVUM5601 220N 1180 720 340 200 120 60
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
16
Globe Valves
V211
The V211 is a flanged valve with a soft seat for tight shut off Suitable for a wide range of applications such as heating, cooling and air handling systems with hot or chilled water. If the valve is used for media at temperatures below 0 C, it should be equipped with a heater in order to prevent ice formation on the valve stem.
Design Pressure class Flow characteristic Stroke Rangeability (Kvs/Kv min) Leakage Pm Max. temperature of medium Min. temperature of medium Max. glycol/concentration Connections
2-way plug valve, stem up closed PN 16 Equal percentage modied 20 mm >50 Tight sealing 400 kPa, water 120C -20C 50% Flange according to ISO 7005-2
Materials Body Stem Plug Plug Sealing Seat Stem packing Nodular iron EN-JS 1030 Stainless steel SS 2346 Brass CW602N EPDM Nodular iron EN-JS 1030 EPDM
Max Close-off Pressure kPa V211 Non Spring Return Actuators M310 Part number DN Kvs Rangeability 300N 721-1116-000 721-1120-000 721-1124-000 721-1128-000 721-1132-000
2011 Schneider Electric. All rights reserved.
Spring Return M1500 1500N 1600 1600 1600 1600 1600 1350 950 650 MV15B 1500N 1600 1600 1600 1600 1600 1350 950 650 MG900 SR 900N 1600 1600 1600 1600 1160 855 605 415
M400 400N 800 800 800 650 500 350 250 150
M800 800N 1600 1600 1600 1500 1150 850 600 400
15 15 15 20 25 32 40 50
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
17
The V212T is a flanged balanced valve requiring only minimal actuator force, coupled with a soft seat and good rangeability the V212 provides very energy efficient control of hydronic applications Suitable for a wide range of applications such as heating, cooling and air handling systems with hot or chilled water. If the valve is used for media at temperatures below 0 C, it should be equipped with a heater in order to prevent ice formation on the valve stem.
Design Pressure class Flow characteristic Stroke Rangeability (Kvs/Kv min) Leakage Pm
2-way pressure balanced plug valve, stem up closed PN 16 Equal percentage modied 20 mm >50 Tight sealing 400 kPa, water 120C -20C 50% Flange according to ISO 7005-2
Materials Body Stem Plug Sealing Seat Stem packing Nodular iron EN-JS 1030 Stainless steel SS 2346 Brass CW602N EPDM Nodular iron EN-JS 1030 EPDM
Max Close-off Pressure kPa V212 Non Spring Return Actuators M400 Part number DN Kvs Rangeability 400N 721-1232-000 721-1236-000 721-1240-000 721-1244-000 25 32 40 50 10 16 25 38 >50 >50 >50 >50 800 750 700 600 800N 1600 1600 1600 1600 1500N 1600 1600 1600 1600 1500N 1600 1600 1600 1600 900N 1600 1600 1600 1600 M800 M1500 MV15B Spring Return M900 SR
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
18
Globe Valves
The VGS211F...CS is a flanged high temperature valve for media temperatures up to 200C Primarily designed for steam but also suitable for a wide range of applications such as heating, cooling and air handling systems with hot or chilled water and steam. If the valve is used for media at temperatures below 0 C, it should be equipped with a stem heater in order to prevent ice formation on the valve stem.
Design Pressure class Flow characteristic Rangeability (Kvs/Kv min) DN15-20 DN25-100 Leakage Pm Max. temperature of medium Min. temperature of medium Max. glycol/concentration
Cast iron , EN-GJL 250 Stainless steel (AISI 303) Stainless steel (AISI 303) Stainless steel (AISI 303) Spring Loaded PTFE V-Ring 16.5 mm 25 mm 45 mm
VGS211F...CS
Part number
VGS211F-15CS03 VGS211F-15CS04 VGS211F-15CS05 VGS211F-15CS07 VGS211F-15CS08 VGS211F-20CS 2011 Schneider Electric. All rights reserved. VGS211F-25CS VGS211F-32CS VGS211F-40CS VGS211F-50CS VGS211F-65CS VGS211F-80CS VGS211F-100CS
Type Designation
VGS211F-15CS 0.63M SD00 VGS211F-15CS 1M SD00 VGS211F-15CS 1.6M SD00 VGS211F-15CS 2.5M SD00 VGS211F-15CS 4M SD00 VGS211F-20CS 6.3 M SD00 VGS211F-25CS 10M SD00 VGS211F-32CS 16M SD00 VGS211F-40CS 25M SD00 VGS211F-50CS 40M SD00 VGS211F-65CS 63M SD00 VGS211F-80CS 110M SD00 VGS211F-100CS 140M SD00
DN
15 15 15 15 15 20 25 32 40 50 65 80 100
Kvs
0.6 1.0 1.6 2.5 4.0 6.3 10 16 25 40 63 110 140
M400 400N
1600 1600 1600 1300 1300 750 450 450 250 150 -
M800 800N
1600 1600 1600 1600 1600 1600 1300 1300 800 500 210 150 90
M1500 1500N
1600 1600 1600 1600 1600 1600 1600 1600 1350 900 350 250 150
M3000 3000N
720 550 350
M700 700N
1600 1600 1600 1600 1600 1500 900 900 550 350 150 100 60
MG900 SR 900N
1600 1600 1600 1600 1600 1600 1300 1300 800 500 210 -
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
19
The VG221F...C is a large flanged balanced valve suitable for large hydronic flows in heating and air conditioning circuits. The balanced plug enables a low actuating force to control the valve. Suitable for a wide range of applications using hot water or de-aerated cooling water With cooling media at temperatures below 0C, a heater must be fitted to protect against stem seizure due to freezing.
Design Pressure class Flow characteristics Rangeability (Kvs/Kv min) Stroke DN 65 DN 80 DN 150 Leakage Pm
2-way pressure balanced plug valve, stem up closed PN 16 Equal Percentage >50
Max. temperature of medium Min. temperature of medium Connection Materials Body Stem
Grey cast iron (EN-GJL 250) stainless steel (AISI 303) Brass (CW614N) Grey cast iron (EN-GJL 250) EPDM
Max Close-off Pressure kPa VG221F...C Non Spring Return Actuators M800 800N 1600 1450 1000 750 550 M1500 1500N 1600 1600 1600 1600 1450 MV15B 1500N 1600 1600 1600 1600 1450 M3000 3000N 1600 1600 1600 1600 1600 Spring Return M700 700N 1300 1000 700 470 300 MG900 SR 900N 1600 2011 Schneider Electric. All rights reserved.
Part number
Type Designation
Stroke
DN
Kvs
Rangeability
25
65 80 100
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
20
Globe Valves
V222
The V222 is a large flanged balanced valve, suitable for control of large flows in heating and air conditioning systems. The balanced plug enables a low actuating force to control the valve. A stainless steel seat allows a large pressure drop across the valve. Suitable for a wide range of applications using hot water or de-aerated cooling water
Design Pressure class Flow characteristics Stroke DN 65 DN 100 DN 125 DN 150 Rangeability (Kvs/Kv min) Leakage
2-way pressure balanced plug valve, stem down, closed PN 16 Equal Percentage
Nodular iron GG25 Stainless steel SS 1.4021 Stainless steel SS 1.4021 Stainless steel SS 1.4021 Spring-loaded PTFE-V-ring
Max Close-off Pressure kPa V222 Non Spring Return Actuators M800 Rangeability 800N >50 >50 >50 >50 >50 1500 1500 1100 ----1500N 1600 1600 1600 ----1500N 1600 1600 1600 ----3000 1600 1600 1600 ----2200N ------1600 1400 5000N ------1600 1600 700N 1200 1200 800 ----M1500 MV15B M3000 M22 M50 Spring Return M700
Part number
DN
Kvs
Pm (kPa)
Replacement packing box: DN65-100: 1-001-0820-0 DN125-150: 1-001-0821-0 Stem Heater DN65-100: 880-0112-000 DN125-150: 880-0113-000 Replacement stem adaptor/hex bush: DN125-150: 880-0134-000
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
21
The V231 is a flanged PN25 valve with a very high rangeability The valve is suitable for primary district heating circuits as well as hot and chilled water applications where high pressure or where a very fine resolution of flow control is required. If the valve is used for media at temperatures below 0C, it should be equipped with a heater in order to prevent ice formation on the valve stem.
Design Pressure class Flow characteristic Stroke Rangeability (Kvs/Kv min) Leakage Pm Max. temperature, water
2-way plug valve, stem up closed PN 25 Equal percentage modied 20 mm See table Up to 0.02% of Kvs Max. 800 kPa, water 150C 120C
Min. temperature of medium Max. Glycol concentration Flanges drilling Materials Body Plug and seat Stem Stem Packing
-20C 50%
Nodular iron SS 0727 (GGG40.3) Stainless steel SS 2346 Stainless steel SS 2346 EPDM
Max Close-off Pressure kPa V231 Non Spring Return Actuators M310 300N 1000 1000 1000 1000 800 800 800 650 400 300 150 50 M400 400N 1000 1000 1000 1000 800 800 800 650 500 350 250 150 M800 800N 1600 1600 1600 1600 1600 1600 1600 1500 1150 850 600 400 M1500 1500N 1600 1600 1600 1600 1600 1600 1600 1600 1600 1350 950 650 MV15B 1500N 1600 1600 1600 1600 1600 1600 1600 1600 1600 1350 950 650 Spring Return MG900 SR 900N 1600 1600 1600 1600 1600 1600 1600 1500 1150 850 600 400
2011 Schneider Electric. All rights reserved.
Part number
DN
Kvs
Rangeability
721-3106-000 721-3110-000 721-3114-000 721-3118-000 721-3122-000 721-3126-000 721-3130-000 721-3134-000 721-3138-000 721-3142-000 721-3146-000 721-3150-000
15 15 15 15 15 15 15 20 25 32 40 50
>50 >50 >50 >50 >50 >50 >50 >200 >200 >200 >200 >200
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
22
Globe Valves
V232
The V232 is a pressure balanced flanged PN25 valve with high rangeability and a high differential pressure capability. The balanced plug enables a low actuating force to control the valve. The valve is suitable for primary district heating circuits as well as hot and chilled water applications where high pressure or a very fine resolution of controllable flow is required. If the valve is used for media at temperatures below 0C, it should be equipped with a heater in order to prevent ice formation on the valve stem.
2-way, pressure balanced plug valve, stem up closed PN 25 Equal percentage modied 20 mm See table Up to 0.02% of Kvs Max. 800 kPa, water 150C -20C
Materials Body Plug and seat Stem Stem packing Nodular iron SS 0727 (GGG40.3) Stainless steel SS 2346 Stainless steel SS 2346 EPDM
Rangeability (Kvs/Kv min) Leakage Pm Max. temperature of medium Min. temperature of medium Flange drilling
Max Close-off Pressure kPa V232 Non Spring Return Actuators M400 Part number DN Kvs Rangeability 400N 721-3238-000 721-3242-000 721-3246-000 721-3250-000 25 32 40 50 10 16 25 38 >200 >200 >200 >200 800 750 700 600 800N 1600 1600 1600 1600 1500N 1600 1600 1600 1600 1500N 1600 1600 1600 1600 900N 1600 1600 1600 1600 M800 M1500 MV15B Spring Return MG900 SR
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
23
Design Pressure class Flow characteristics Stroke DN 65 DN 100 DN 125 DN 150 Rangeability (Kvs/Kv min) Leakage
2-way pressure balanced plug valve stem down, closed PN 25 Equal Percentage
Max. temperature of medium Min. temperature of medium Max. Glycol concentration Connection Materials
Nodular iron GGG40.3 Stainless steel SS 1.4021 Stainless steel SS 1.4021 Stainless steel SS 1.4021 Spring-loaded PTFE-V-ring
Max Close-off Pressure kPa V292 Non Spring Return Actuators M800 Part number DN Kvs Rangeability 800N 721-9254-000 721-9258-000 721-9262-000 721-9266-000 721-9270-000 65 80 100 125 150 63 85 130 250 350 >50 >50 >50 >50 >50 1500 1500 1100 ----1500N 2500 2500 1600 ----1500N 2500 2500 1600 ----3000N 2500 2500 2500 ----2200N ------1800 1400 5000N ------2500 2500 700N 1200 1200 800 ---- 2011 Schneider Electric. All rights reserved.
M1500
MV15B
Replacement packing box DN65-100: 1-001-0820-0 DN125-150: 1-001-0821-0 Stem Heater DN65-100: 880-0112-000 DN125-150: 880-0113-000 Replacement stem adaptor/hex bush: DN125-150: 880-0134-000
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
24
Globe Valves
V341
The V341 is a high quality general purpose valve. Polished stainless seats provide high differential pressure capability and low leakage. The valve is suitable for a wide range of applications such as heating, cooling, air handling and domestic hot water systems. The valve can handle hot and cold water with phosphate, hydrazine and antifreeze additives. If the valve is used for media at temperatures below 0C, it should be equipped with a heater in order to prevent ice formation on the valve stem.
Design Pressure class Flow characteristics A-AB Flow characteristics B-AB Stroke Rangeability (Kvs/Kv min) Leakage A-AB Leakage B-AB Pm
3-way plug valve Stem up closed, A port (B-AB open) PN 16 Equal percentage modied Complementary 20 mm See table up to 0.02% of Kvs up to 0.05% of Kvs 600 kPa, water
Max. temperature of medium Min. temperature of medium Connection Glycol Concentration Materials Body Plug and seat Stem Stem packing
Max Close-off Pressure (kPa) V341 Non Spring Return Actuators M310 Part number DN Connection Kvs Rangeability 300N 731-4121-000 731-4125-000 731-4129-000 731-4133-000 731-4137-000 731-4141-000 731-4145-000
2011 Schneider Electric. All rights reserved.
Spring Return M1500 1500N 1600 1600 1600 1600 1600 1350 950 650 MV15B 1500N 1600 1600 1600 1600 1600 1350 950 650 M700 700N 1400 1400 1400 1100 850 650 450 300 MG900 SR 900N 1600 1600 1600 1510 1160 855 605 415
M400 400N 800 800 800 650 500 350 250 150
M800 800N 1600 1600 1600 1500 1150 850 600 400
15 15 15 20 25 32 40 50
731-4149-000
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
25
DN
Materials
Union nut: malleable iron casting, galv. Union end: malleable iron casting, galv. Packing, standard: Fibre Gasket (Klingersil C4400) or Packing, spec: PTFE Gasket (Kingersil Top Chem 1,5mm)
15 20 25 32 40 50
* The accessory intended for the primary circuit of district heating connections.
d2
AA2
Part no. for connection, one pkg/port Packing, std 911-2101-015 911-2101-020 911-2101-025 911-2101-032 911-2101-040 911-2101-050 Packing, spec.* 911-2104-015 911-2104-020 911-2104-025 911-2104-032 911-2104-040 911-2104-050
DN 15 20 25 32 40 50
mm 15 22 28 35 42 54
Materials
Union nut: malleable iron casting, galv. Union end: Bronze, SS 5204 Packing, standard: Fibre Gasket (Klingersil C4400) or Packing, spec: PTFE Gasket (Kingersil Top Chem 1,5mm)
* The accessory combination intended for the primary circuit of district heating connections.
Part no. for connection, one pkg/port Packing, std 911-2102-015 911-2102-020 911-2102-025 911-2102-032 911-2102-040 911-2102-050 Packing, spec.* 911-2105-015 (1) 911-2105-020 (1) 911-2105-025 (1) 911-2105-032 (1) 911-2105-040 911-2105-050
2011 Schneider Electric. All rights reserved.
DN 15 20 25 32 40 50
Materials
Union nut: Packing, standard: Malleable iron casting, galv. or Packing, Spec: Brass Union end: malleable iron casting, galv. Packing, standard: Fibre Gasket (Klingersil C4400) or Packing, spec: PTFE Gasket (Kingersil Top Chem 1,5mm)
(1) Material Union nut: brass SS 5252 * The accessory Combination intended for the primary circuit of district heating connections. 2 sets of connections required for 2 way valves
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
26
Globe Valves
MZ
Satchwell MZ valves are suitable for a wide range of applications, such as heating, cooling, air handling and domestic hot water systems. These valves have a linear moving spindle and a modied parabolic characterised plug operating against the upper seat, which controls ow quantity to suit the load. The lower part of the plug has a linear characteristic operating against the lower seat, and controlling the bypass quantity. MZ valves can also be used with a medium of max. 25% glycol solution.
Design
3-way plug valve, stem up closed, A-AB (B-AB open) PN 16 Modied Parabolic Linear 9.5mm 15.9mm 50 Max. 0.1% of Kvs Max. 0.5% of Kvs 120C 2C
Materials Body Stem Plug Sealing Seat Top Seat Bottom ( & valves) Seat Bottom (1 to 2 valves) Stem Packing Bronze: Leaded Gunmetal BS1400 LG2 Stainless steel BS970 Grade 303 S42 Copper Alloy BS2874 CZ132 or BS2871 CZ 110 Gland O Ring Integral with body Copper Alloy BS2874 CZ 132 Leaded Gunmetal BS1400 LG2 PTFE Chevrons
Pressure class Flow characteristic Port 2 Flow characteristic Port 3 Stroke and Valves Stroke 1 to 2 Valves Rangeability (Kvs/Kv min) Leakage (Ports 2-1) Leakage (Ports 3-1) Max. temperature of medium Min. temperature of medium Connections
MZ
Max Close-off Pressure kPa Non Spring return actuator Connection Rp Rp Rp 1 Rp 1 Rp 1 Rp 2 Kvs 2.6 4.2 8.3 12.5 21 33 Rangeability 50 50 50 50 50 50 M8001 800N 1600 1600 1262 755 533 312 Spring return actuator M7002 700N 1600 1600 1262 755 533 312
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
27
The V211T is an internally threaded valve with a soft seat for tight shut off. If the valve is used for media at temperatures below 0 C, it should be equipped with a heater in order to prevent ice formation on the valve stem.
Design Pressure class Flow characteristic A-AB Flow characteristic B-AB Stroke Rangeability (Kvs/Kv min) Leakage A-AB and B-AB Pm
3-way plug valve stem up closed, A port (B-AB open) PN 16 Equal percentage modied Complementary 20 mm >50 Tight sealing 400 kPa, water 120C -20C 50% Internal pipe thread Rp
Materials Body Stem Plug Sealing Seat Stem packing Nodular iron EN-JS 1030 Stainless steel SS 2346 Brass CW602N EPDM Nodular iron EN-JS 1030 EPDM
Max. temperature of medium Min. temperature of medium Max. Glycol concentration Connection
Max Close-off Pressure kPa V311T Non Spring Return Actuators M310 Part number DN Connection Kvs Rangeability 300N 731-1717-000 731-1721-000 731-1725-000 731-1729-000 731-1733-000 731-1737-000 731-1741-000 731-1745-000 15 15 15 20 25 32 40 50 Rp Rp Rp Rp Rp 1 Rp 1 Rp 1 Rp 2 1.6 2.5 4.0 6.3 10 16 25 38 >50 >50 >50 >50 >50 >50 >50 >50 800 800 800 650 400 300 150 50 400N 800 800 800 650 500 350 250 150 800N 1600 1600 1600 1500 1150 850 600 400 1500N 1600 1600 1600 1600 1600 1350 950 650 1500N 1600 1600 1600 1600 1600 1350 950 650 700N 1400 1400 1400 1100 850 650 450 300 900N 1600 1600 1600 1510
2011 Schneider Electric. All rights reserved.
M400
M800
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
28
Globe Valves
MZX
The MZX is a 3 way valve utilising a compact actuator for installations with limited space. The valves are suitable for a wide range of mixing applications such as heating, cooling, air handling and domestic hot water systems.
Design Pressure class Flow characteristic Port 2 Flow characteristic Port 3 Stroke Rangeability (Kvs/Kv min) Leakage (Ports 2-1) Leakage (Ports 3-1) Max. temperature of medium Min. temperature of medium Max. Glycol concentration Connections
3-way plug valve PN 16 Modied Parabolic Linear 12.7mm 50 0.1% max. 0.5% max. 120C 2C 25%
Materials Body Stem Plug Sealing Seat Top Seat Bottom ( & valves) Seat Bottom (1 to 2 valves) Stem Packing Bronze: Leaded Gunmetal BS1400 LG2 Stainless steel BS970 Grade 303 S42 Copper Alloy BS2874 CZ132 or BS2871 CZ 110 Gland O Ring Integral with body Copper Alloy BS2874 CZ 132 Leaded Gunmetal BS1400 LG2 PTFE Chevrons
Note: suitable for operation by AVUX, AVUM and AVUE actuators only.
Max Close-off Pressure kPa MZX Non Spring Return Actuators Part number MZX4402 MZX4452 MZX4501 MZX4551 MZX4601 MZX4651
2011 Schneider Electric. All rights reserved.
Connection Rp Rp Rp 1 Rp 1 Rp 1 Rp 2
Rangeability 50 50 50 50 50 50
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
29
The V311 is a flanged valve with a soft seat for tight shut off The valve is suitable for a wide range of mixing applications with hot or chilled water in heating cooling and air handling systems. If the valve is used for media at temperatures below 0 C, it should be equipped with a stem heater in order to prevent ice formation on the valve stem.
Design
3-way plug valve stem up closed (A port/B-AB open) PN 16 Equal percentage modied Complementary 20 mm >50 Tight sealing 400 kPa, water 120C -20C 25% Flange according to ISO 7005-2 Materials Body Stem Plug Sealing Seat Stem Packing Nodular iron EN-JS 1030 Stainless steel SS 2346 Brass CW602N EPDM Nodular iron EN-JS 1030 EPDM
Pressure class Flow characteristic A-AB Flow characteristic B-AB Stroke Rangeability (Kvs/Kv min) Leakage A-AB and B-AB Pm Max. temperature of medium Min. temperature of medium Max. Glycol concentration Connection
Max Close-off Pressure kPa V311 Non Spring Return Actuators M310 Part number DN Kvs Rangeability 300N 731-1117-000 731-1121-000 731-1125-000 731-1129-000 731-1133-000 731-1137-000 731-1141-000 731-1145-000 15 15 15 20 25 32 40 50 1.6 2.5 4.0 6.3 10 16 25 38 >50 >50 >50 >50 >50 >50 >50 >50 800 800 800 650 400 300 150 50 400N 800 800 800 650 500 350 250 150 800N 1600 1600 1600 1500 1150 850 600 400 1500N 1600 1600 1600 1600 1600 1350 950 650 1500N 1600 1600 1600 1600 1600 1350 950 650 700N 1400 1400 1400 1100 850 650 450 300 900N 1600 1600 1600 1510 1160 855 605 415
2011 Schneider Electric. All rights reserved.
M400
M800
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
30
Globe Valves
The VG311F...C is a large flanged general purpose valve The valve is suitable for a wide range of mixing applications with hot or chilled water in heating cooling and air handling systems. If the valve is used for media at temperatures below 0 C, it should be equipped with a stem heater in order to prevent ice formation on the valve stem.
Design Pressure class Connection Rangeability (Kvs/Kv min) Flow characteristics A AB Flow characteristics B AB Stroke DN65 DN80-150 Leakage A AB Leakage B AB
3-way plug mixing valve stem up closed (A port/B-AB open) PN 16 Flange according ISO 7005-2 > 50 Equal Percentage Linear 25 mm 45mm < 0.03% of Kvs < 2% of Kvs
Pm Max. temperature of medium Min. temperature of medium Max. Glycol concentration Materials Body Stem Plug (DN65-100) Plug (DN125-150) Seat Stem Packing
Grey Cast iron (GJL 250) Stainless steel (AISI 303) Brass (CW614) Bronze (CB491K UNI EN 1982) Grey Cast iron (EN JL 1040) EPDM
Max Close-off Pressure kPa VG311F...C Non Spring Return Actuators M800 Part number Type Designation DN Kvs Rangeability 800N VG311F-65C VG311F-80C VG311F-100C VG311F-125C VG311F-150C
2011 Schneider Electric. All rights reserved.
Spring Return M3000 3000N 850 570 370 230 160 M700 700N 220 140 80 50 35 MG900 SR 900N 290 -----
VG311F-65C 63M SU00 VG311F-80C 100M SU00 VG311F-100C- 130M SU00 VG311F-125C 200M SU00 VG311F-150C 300M SU00
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
31
Grey Cast iron GG25 Stainless steel SS 1.4571 Stainless steel SS 1.4021 Stainless steel SS 1.4021 Stainless Steel SS 1.4021 EPDM
V321
Max Close-off Pressure kPa Non Spring Return Actuators M800 800N 140 80 40 ----M1500 1500N 290 180 110 ----MV15B 1500N 290 180 110 ----M3000 3000N 700 440 280 ----M22 2200N ------90 60 M50 5000N ------340 240 Spring Return M700 700N 80 40 -------
Part number
DN
Kvs
Pm
Rangeability
100 80 60 60 60
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
Replacement packing box: DN65-100: 1-001-0822-0 DN-150: 1-001-0823-0 Conversion kit - V321 with old M16 actuator to Forta connection: 880-0130-000 Stem Heater DN65-100: 880 0110 000 DN125-150: 880 0111 000 Replacement Stem adaptors, DN65-100: 880-0133-000 DN125-150: 1-001-0824-0 Blanking ange set, to convert a V321 into a 2 way valve, e.g. when upgrading installations with VSD pumps. DN65 913-0065-000, DN80 913-0080-000, DN100 913-0100-000, DN125 913-0125-000; DN150 913-0150-000 Tight sealing versions available, contact Product Support for details.
32
M3000
Output Y
Voltage Load
2-10 V (0-100%) 2 mA
Analogue input
Voltage Impedance Digital inputs VHVC Voltage across open input Current through closed input 24 V AC 5 mA 0-10V / 2-10V / 0-5V / 5-10 / 2-6 / 6-10 Min. 100 k
Ambient temperature
Operation Storage Ambient humidity Enclosure rating
Standards
Emission Immunity
EN 61326-1 EN 61326-1
2 x SPDT 24V AC
4A (resistive) / 1A (inductive)
Material
Cover
Output G1
Voltage
2011 Schneider Electric. All rights reserved.
Colour (M3000)
Load
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
33
Forta Accessories Part number 880-0104-000 880-0108-000 880-0109-000 Description S2 2 x SPDT Axillary End Point Switches (24Vac 4A AC-1) (1) Stem heater Forta-Venta (1) for media temp 0C to -20C Forta Yoke Heater for amb. temp -10C, media temp -8C
Forta Linkage Kits for other valves Part number 880-0124-000 880-0116-000 880-0118-000 880-0125-000 880-0129-000 880-0127-000 880-0128-000 880-0129-000 880-0252-000 880-0253-000 AV-811 AV-812 880-0130-000 Description Linkage Forta-Satchwell L2SV Linkage Forta-Honeywell M6 and 1/4 stem Linkage Forta-Siemens Linkage Forta-Danfoss Linkage Forta-Spirax Sarco (M30:KE, KF, and KL; DN 15-100) [ AG52 ] AG50 linkage Controlli flanged Valves with M40 threaded bonnet, installed pre July 2009 types: VSG, VMB16, VBG (up to DN65). AG51 Linkage Controlli Flanged Valves with M40 threaded bonnet, installed Pre July 2009 types: VBG, SS, DS, VSS, VBA, 3V, VMS (all sizes) types: VSG, VMB16, (DN80 or larger), SSGA AG52 linkage Controlli Threaded valves, types: VSB, VMB, VSB_F, VMB_F Linkage DN15-V298 Linkage DN15-V2XX/V3XX Forta to VB-7000 valves (Siebe/TAC) Forta to VB-8000 valves (siebe / TAC) V321 DN65-100 to Forta (convert from M16 actuator)
2011 Schneider Electric. All rights reserved.
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
34
MV15B
The MV15B is a powerful 3 point floating actuator for the control of 2 way and 3 way globe valves. The actuator is available in both a 24V AC and 230V AC versions The actuator self adjusts to the stroke of whatever valve it is connected to. The U bolt mounting makes for a very easy and quick installation. A manual override is standard on all models.
Supply voltage Power consumption Transformer sizing Running speed Running time for 20 mm Stroke Thrust Ambient temperature Operation Storage Enclosure rating Standards Emission Immunity LVD Low Voltage directive Material Housing Cover Colour
Description Linkage M700-Satchwell L7SV Switch S2-MV15B Forta Yoke Heater for amb. temp -10C, media temp -8C
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
35
EN 61326-1 EN 61326-1
Forta MG900 SR
Spring Return Function Stem Up Part number MG900-SU MG900-SD MG900-SU-65 MG900-SD-65 Type Designation MG900 SRU-24FM T54 00 MG900 SRD-24FM T54 00 MG900 SRU-24FM T65 00 MG900 SRD-24FM T65 00 IP Rating 54 54 65 65
Running time Modulating 10 to 25 mm (0.39 to 1 in.) Modulating 25 to 32 mm (1 to 1.26 in.) Increase/decrease Analogue input Voltage Impedance Digital inputs VHVC Voltage across open input Current through closed input Pulse time Output G1 Voltage Load Output Y Voltage Load Ambient temperature Operation Storage Ambient humidity -10 to 50 C -10 to 50 C Max. 90% RH 2-10 V (0-100%) 2 mA 16 V DC / 20V DC 0.3 V 25 mA, short-circuit proof 24 V AC 5 mA Min. 20 ms 0-10V / 2-10V / 0-5V / 5-10 / 2-6 / 6-10 Min. 100 k 15s 20s 300s/60s
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
36
The TAC Forta M700 is a spring return actuator for the control of 2 and 3 way globe valves. It utilises the same PCBA as the Forta non spring return actuators and so has the same capability with regard to self adapting to the valve stroke, and the same flexibility with regard to set up configuration. The U bolt mounting makes for a very easy and quick installation. A manual override is standard on all models. Supply voltage Power consumption Transformer sizing Spring return close off time at power failure 20 mm stroke 45 mm stroke Stroke Thrust Duty cycle Running time Modulating 10 to 25 mm Modulating 25 to 32 mm Modulating 10 to 52 mm Increase/decrease Analogue input Voltage Impedance Digital inputs VHVC Voltage across open input Current through closed input Pulse time Output G1 Voltage Load
2011 Schneider Electric. All rights reserved.
24 V AC +25% / -30%, 50-60 Hz Average 30 VA 50 VA Standards Emission Immunity Material Housing Cover Colour Aluminium ABS/PC plastic Black/red EN 61326-1 EN 61326-1
Less than 50 seconds Less than 95 seconds 9 to 52 mm 700 N Max. 20%/60 minutes
24 V AC 5 mA Min. 20 ms
880-0126-000 880-0109-000
Key: S2 SRSU SRSD L7SV auxiliary switch spring return stem up spring return stem down Satchwell linkage to VZ and MZ valves
Output Y Voltage Load Ambient temperature Operation Storage Ambient humidity Enclosure rating
Schneider Electric
VACAT_July2011
2-10 V (0-100%) 2 mA
Valve and Actuator Catalogue Globe Valve Actuators AVUX, AVUM, AVUE
37
The AVUX, AVUM and AVUE are compact actuators used to operate the VZX and MZX valves. The AVUE 5304 and 5354 are modulating actuators. They have a linear output drive, and they can be used with any controller providing a 0-10Vdc output signal. The AVUX is a 24Vac modulating linear actuator suitable to be driven from any 24Vac 3-point controller or device. The AVUM is a mains voltage (230Vac) modulating linear actuator that can be controlled from any controller or device having a 3-point mains switched output. Running time Input voltage AVUX Input voltage AVUM Input voltage AVUE Stroke 24 Vac, 10% 50 Hz 230 Vac, 10% 50 Hz 24 Vac, 10% 50 Hz 12.7mm Stem force Protection standard Connection cable Ambient operating temperature 85 to 110 secs 220N IP 40 1.5m 0 to 50C
AVUE,AVUX,AVUM Actuators for VZX, MZX valves Part number AVUE5304 AVUE5354 AVUX5202 AVUM5601
Control Action
Control signal
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
38
M22, M50
The M22 and M50 actuators are powerful actuators suitable for driving DN125 and DN150 sizes of valve types V222, V292 and V321. The actuators are available in modulating or 3 point floating versions. The 3 point floating versions are available in 24V AC or 230V AC voltages and also with optional end switches
60Hz, 112s Duty cycle Max. 80%/60 minutes Analogue input Voltage Impedance Current Impedance Ambient temperature Operation Storage Ambient humidity Enclosure rating -20 to +70C -20 to +70C <95 %RH IP 65 0 (2) 10 V 30 kOhm 0 (4) 20 mA 125 Ohm
Weight M22A M50A Optional travel switch S2 Type Capacity Zero potential 10A, 250V 5,4 kg 6,0 kg
M22A, M50A modulating actuators Part number 890-0104-000 890-0204-000 Description M22A-24V M50A-24V
50 Hz 12 VA 12 VA 11 VA 11 VA 19 VA 19 VA 28 VA
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
39
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
40
These particular valves are designed to be used with thermo-electric actuators type MZ140, which is available in an on/off or a modulating variant.
VZ*08E
Brass (AISI 303) Glass reinforced PPS Stainless steel (AISI 303) Double EPDM O-ring EPDM
Three-way valves DN15 DN15 DN15 DN15 DN15 DN20 DN20 DN20 0,25 0,4 0,6 1 1,6 2,5 4 6 VZ308E-15BP01 VZ308E-15BP02 VZ308E-15BP03 VZ308E-15BP04 VZ308E-15BP05 VZ308E-20BP07 VZ308E-20BP08 VZ308E-20BP09 G1/2A G1/2A G1/2A G1/2A G1/2A G3/4A G3/4A G3/4A VZ308C-15BP01 VZ308C-15BP02 VZ308C-15BP03 VZ308C-15BP04 VZ308C-15BP05 VZ308C-20BP07 15mm 15mm 15mm 15mm 15mm 22mm 0.25 0.4 0.6 1 1.6 2.5 0.25 0.4 0.6 0.8 1 1.6 150 100 A-AB 40 B-AB 250
0.25 0.4 0.6 0.8 1 1.6 150 100 A-AB 40 B-AB 250
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
41
4 mm M30 x 1,5 2m bipolar (0.75mm ) Fire-resistant case: Class V0 IP 44 (for vertical mounting)
2
Part number
Control signal
Power VAC
110-230 24 24
Note: 5 pc multi packs of the Compression variants (VZ*08C) are available, consult data sheet for full details and part numbers.
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
42
Flow Characteristics Equal percentage On direct (A-AB) way Linear Leakage On by-pass (B-AB) way 0% tight close-off
Connections Flat face external or compression thread Rangeability Materials Valve body Trim Stem Stem packing Plug sealing
* Nuts and Olives supplied with Valve
50:1
2 to 95C 30%
Brass (CW617N) Glass reinforced PPE Stainless steel (AISI 303) EPDM EPDM
Flat face Size DN 15 DN 15 DN 15 DN 15 DN 15 DN 15 DN 20 DN 20 DN 20 Kv 0,25 0,4 0,6 1 1,6 2 2,5 4 6 Part Number VZ219E-15BP01 VZ219E-15BP02 VZ219E-15BP03 VZ219E-15BP04 VZ219E-15BP05 VZ219E-15BP06 VZ219E-20BP07 VZ219E-20BP08 VZ219E-20BP09 Connection G1/2A G1/2A G1/2A G1/2A G1/2A G1/2A G3/4A G3/4A G3/4A
Compression* Part Number VZ219C-15BP01 VZ219C-15BP02 VZ219C-15BP03 VZ219C-15BP04 VZ219C-15BP05 VZ219C-15BP06 VZ219C-20BP07 Connection 15mm 15mm 15mm 15mm 15mm 15mm 22mm
350
250 150
Three-way valves DN 15 DN 15 DN 15 DN 15 DN 15 DN 15 DN 20 DN 20 DN 20 0,25 0,4 0,6 1 1,6 2 2,5 4 6 VZ319E-15BP01 VZ319E-15BP02 VZ319E-15BP03 VZ319E-15BP04 VZ319E-15BP05 VZ319E-15BP06 VZ319E-20BP07 VZ319E-20BP08 VZ319E-20BP09 G1/2A G1/2A G1/2A G1/2A G1/2A G1/2A G3/4A G3/4A G3/4A VZ319C-15BP01 VZ319C-15BP02 VZ319C-15BP03 VZ319C-15BP04 VZ319C-15BP05 VZ319C-15BP06 VZ319C-20BP07 15mm 15mm 15mm 15mm 15mm 15mm 22mm 0.25 0.4 0.6 1 1.6 2 2.5 0.25 0.25 0.4 0.6 1 1.6 1.6 150 100 A-AB 40 B-AB 350
DN 15 DN 15 DN 15 DN 15 DN 15 DN 15 DN 20 DN 20 DN 20
0.25 0.25 0.4 0.6 1 1.6 1.6 250 100 A-AB 40 B-AB 350
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
43
Input voltage MZ20A Input voltage MZ20B Power consumption MZ20A Power consumption MZ20B Speed Temperature Working Storage Stem force Max stroke Connection cable Protection class
-5 to +55C -25 to +65C 200 N 6.5 mm 3 wires 1.5 m IP 43 (for vertical mounting)
845-5003-000
Contact Schneider Electric for LON actuators for long stroke zone valves.
Note: 5 pc multi packs of the VZ*19C valves are available, consult data sheet for full details and part numbers.
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
44
Connection type
Pipe size
DN
c (mm)
Part number
Pack quantity
Solder *
15mm 12mm
15 20
G 1/2 G 3/4
12 15
---
---
911-2076-000 911-2077-000
1 1
External Thread
R 3/8 R 1/2
15 20
G 1/2 G 3/4
---
R 3/8 R 1/2
---
911-2078-010 911-2079-010
10 10
Flat to compression*
15 mm 22 mm
15 20
G 1/2 G 3/4
---
---
15 22
911-2080-000 911-2081-000
1 1
15 mm 20 mm
15 20
---
---
15 22
911-2082-000 911-2083-000
10 10
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
45
MZ 18B
The MZ18B actuator is for 3 point floating control of the installed base of VZ22/ VZ32/VZ42 small linear zone valves
Input voltage Power consumption Control mode Stroke Running time Stem force Insulation class Connection cable Coupling ring
24 Vac + 10 % / -30 %; 50/60 Hz 0,7 VA Floating (3-point) 6.5 mm 150s at 50 Hz 120s at 60 Hz 180 N (for valves DN 15-20) III 1.5 m M 30 x 1,5 0 to 60C IP 42
2011 Schneider Electric. All rights reserved.
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
46
MR90 actuator for radiator valves Part number MR90NO-24T MR90NC-24T MR90NO-230T MR90NC-230T Type Designation MR90NOU-24T-2M 43 00 MR90NCD-24T-2M 43 00 MR90NOU-230T-2M 43 00 MR90NCD-230T-2M 43 00
Valve Function Without Power Normally Open Normally Closed Normally Open Normally Closed
Suitable valves
Manufacturer Honeywell
2011 Schneider Electric. All rights reserved.
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
47
The MZ09B actuator is designed to provide 3-point control together with radiator valves. The MZ09B actuator is used for radiator valves in fan coil units, induction units, small reheaters and recoolers, and for zone control applications. The absence of end switches and feedback potentiometer ensures longtime reliability. Input voltage Power consumption Control mode Stroke Running time Stem force Protection standard Connection cable Coupling ring Ambient operating temperature limits Enclosure rating 24 Vac + 10 % / -30 %; 50/60 Hz 0.7 VA Floating (3-point) 1.6 mm controlled valve stroke 7.9 mm complete actuator stroke 36 s / 1.6 mm valve stroke 90 N IP 43 in accordance with EN 60529 0.9 m M 30 x 1.5 0 to 60C IP 42
Danfoss Danfoss Manufacturer Honeywell Heimeier Siemens L&S Duogyr Series RA2000, RA-PN, RA-N, RA-U, RA-G, RA-UR, RA-KE, RA-K Series RAVL Valve type V100, V200 Adapter Not required Not required Not required 911-2075-000 911-2074-000
Suitable valves
MZ09L
The MZ09L LON actuator is designed for decentralised building structures and gives customers an effective new capability in energy management and product flexibility. The actuator works with standard SNVTs to provide interoperability with controllers based on LONWORKS technology. The MZ09L small linear actuator is specifically designed to provide LONMARK capabilities together with radiator valves and is used in fan coil units, induction units, small reheaters and recoolers, and for zone control applications. The MZ09L actuator is suitable for LONWORKS technology. Using standard Echelon configuration tools, the actuator can be configured with job specific settings. Power supply Power consumption Control signal Network protocol Channel Stroke Running time Stem force Protection standard Insulation class Connection cables Coupling ring Ambient operating temperature Enclosure rating 24 VAC, 20%, 50/60 Hz 1.4 VA SNVT_lev_percent 0-100% LonTalk FTT10A 2.5mm 53s at 50 Hz 44s at 60 Hz 90 N (for valves DN 15-20) IP 42 III 1.5 m, three leads 1.5 m, two leads M 30 x 1.5 0 to 55C IP 42
Suitable valves
Manufacturer Honeywell Heimeier Siemens L&S Danfoss Danfoss Duogyr Series RA2000, RA-PN, RA-N, RA-U, RA-G Series RAVL Valve type V100, V200 Adapter Not required Not required Not required 911-2075-000 911-2074-000
2011 Schneider Electric. All rights reserved.
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
48
Buttery Valves
VF208W 25-200NS & 100-200NZ
The VF208W is a new generation butterfly valve for the isolation and control of water for HVAC systems such as boiler isolation or heat pump change over from cooling to heating. The butterfly valves have elongated wafer type eyelets for fitment between flanges Energy saving: EPDM soft seats provide tight shut off and zero leakage (Complete insulation possible according to German energy saving order, EnEV) Approved for use with drinking water DN 25-80 (DVGW) Maintenance free, double sealing of stem, centrical disc bearing Good flow control characteristics Integrated dew point barrier No linkage kits required OPTIONS: (upon special request) Lugged flange connections
Pressure Class Leakage (EN 12266-1) Temperature Range Max glycol concentration
Materials Body Lining Disc with zinc-lamella coating Stem Nodular Iron (EN-JS1030) EPDM DN25-80: 1.4581 (AISI316) DN100-200: (EN-JS1030) 1.4021-QT
Ordering Table
Size DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150 DN200 Kv 26 26.5 50 115 260 375 760 1,025 1,790 3450 Stainless Steel Disc Part Number VF208W-25NS VF208W-32NS VF208W-40NS VF208W-50NS VF208W-65NS VF208W-80NS VF208W-100NS VF208W-125NS VF208W-150NS VF208W-200NS Full Type Designation VF208W-25NS 26E B00 VF208W-32NS 26E B00 VF208W-40NS 50E B00 VF208W-50NS 115E B00 VF208W-65NS 260E B00 VF208W-80NS 375E B00 VF208W-100NS 760E B00 VF208W-125NS 1025E B00 VF208W-150NS 1790E B00 VF208W 200NS 3450E B00 Max P (kPa) 600 600 600 600 600 600 600 600 300 300 Actuator MF20 MF20 MF20 MF20 MF20 MF20 MF20 MF40 MF40 MF40
Nodular Iron Disc Part Number VF208W-100NZ VF208W-125NZ VF208W-150NZ VF208W-200NZ Full Type Designation VF208W 100NZ 760E B00 VF208W 125NZ 1025E B00 VF208W 150NZ 1790E B00 VF208W 200NZ 3450E B00
Shaded items are stocked products. Contact Product Management for larger sizes.
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
49
MF40
Power Consumption (rest) 0.2W 0.4W 0.4W 1.25W 0.2W 0.4W 0.4W 2W 2.5W 2W 1.5W Power Consumption (operation) 2.5W 3W 2.5W 3.5W 2.5W 3W 2.5W 4W 5W 4.5W 4W Power Consumption (wire sizing) 5.5VA 7VA 5VA 6VA 5.5VA 7VA 5VA 6VA 9VA 6.5VA 7VA Suitable VF208W valve size DN25-100 DN25-100 DN25-100 DN25-100 DN25-125 DN25-125 DN25-125 DN125-200 DN125-200 DN125-200 DN125-200
Control On-Off / 3P On-Off / 3P 2-10V LON Floating & On/Off Floating & On/Off 0-10V On-Off / 3P On-Off / 3P 0-10V LON
Part Number MF20-24F MF20-230F MF20-24M MF20-24L MF20-24F-R MF20-230F-R MF20-24M-R MF40-24F MF40-230F MF40-24M MF40-24L
Full Type Designation MF20-24F T54 00 MF20-230F T54 00 MF20-24M T54 00 MF20-24L 1M54 00 MF20-24F-T54 R0 MF20-230F-T54 R0 MF20-24M T54 R0 MF40-24F T54 00 MF40-230F T54 00 MF40-24M T54 00 MF40-24L 1M54 00
Torque 20Nm 20Nm 20Nm 20Nm 20Nm 20Nm 20Nm 40Nm 40Nm 40Nm 40Nm
Supply Voltage 24V AC/ DC 230V AC 24V AC/ DC 24V AC/ DC 24V AC/ DC 230V AC 24V AC/ DC 24V AC/ DC 230V AC 24V AC/ DC 24V AC/ DC
Operating time, 90 90 sec 90 sec 90 sec 90 sec 90 sec 90 sec 90 sec 150 sec 150 sec 150 sec 90 sec
Accessories: MD-S1, 1 x SPDT auxiliary switch, Part No. 914-1060-000 MD-S2, 2 x SPDT auxiliary switch, Part No. 914-1061-000
Handlevers:
DN25-65, DN80-100, DN125-200,
N.B Max P Pressure for the valve remains ( Max Valve P is a function of construction, not the actuator)
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
Handlevers can be ordered to fit the VF208W butterfly valve. this enables the valve to be used as hand isolation valves.
50
Shoe Valves
VTRE
Shoe valves are designed to be used in both mixing and diverting circuits. Typical applications include heating, cooling and air conditioning.
The VTRE is a 3-way flanged rotary hydronic shoe valve. The valve is delivered with a handle for manual operation.
Valve type Flow characteristic Operating angle Pressure class Water temperature Max. Min. Max glycol concentration
Connections
Max Close-off Pressure kPa VTRE Mixing Application EM9, M9 DN Kvs 15Nm 731-7039-000 731-7041-000 731-7045-000 731-7049-000 731-7053-000 731-7057-000
2011 Schneider Electric. All rights reserved.
Part number
50 50 50 50 50 50 50 50 50 50
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
51
MBF
MB
Design Pressure Class (MB) Pressure Class (MBF) Flow Characteristic Flow Characteristic Operating angle Rangeability (Kvs / Kv min.) Leakage Max. temperature of medium Min. temperature of medium 3-way rotary shoe valve PN10 PN6 Port 2 Modied Parabolic Port 3 Linear 90 50 0.5% (%of Kvs) 120C 2C Materials Body to 1 valves Body 1 to 2 valves Body 65mm to 100mm Spindle O Rings Connection MB Connection MBF
MBF
Screwed Parallel (female) BSP to BS21 Flanged BS4504, Table 6/11
Hot Pressed Brass to BS218 Close Grained Cast Iron BS1452 Grade 260 Close Grained Cast Iron BS1452 Grade 260 or 220 High Tensile Brass to BS2874 CZ114 EPDM
MB
Max Close-off Pressure kPa RM 2Nm 70 70 70 35 35 35 XRM 2Nm 70 70 70 35 35 35 MD10B-230 10Nm 70 70 70 35 35 35 MD10B-24 10Nm 70 70 70 35 35 35 MD10A-24 10Nm 70 70 70 35 35 35
Size (inches) 1 1 1 2
Rangeability 50 50 50 50 50 50
The MD10B is a damper actuator requiring a linkage kit for use with the MB shoe valves. (LMD/MB linkage kit part number 914-1071-000). Order Auxiliary switches separately, type MD-S2 part number 914-1061-000, type MD-S1, part number 914-1060-000.
MBF
DN 65 80 100
Kvs 65 83 125
Rangeability 50 50 50
20Nm 35 25 25
The MD20B is a damper actuator requiring linkage kit (LMD/MBF part number 914-1070-000). Order auxiliary switches separately, type MD-S2 part number 914-1061-000, type MD-S1, part number 914-1060-000.
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
52
Working range
Running time
RM and XRM
These actuators operate the MB Shoe Valves. The XRM actuator is designed to be operated by a three point floating controller providing an output of 24V ac. The RM actuator is a mains voltage reversing actuator, designed for two position control when used with a changeover type thermostat or modulating control when used with an appropriate controller. On power failure the actuator can be operated manually.
2011 Schneider Electric. All rights reserved.
Input voltage XRM Input voltage RM Stroke Running time Torque Protection standard Ambient operating temperature with water at 120C
Schneider Electric
VACAT_July2011
24 Vac, 50 Hz, 0.5VA 230 Vac, 50 Hz, 5VA 90angular. Reversing 240 secs 2Nm IP 41 -20C to +35C
RM, XRM Actuators for MB Valves Part number XRM3201 Description Rotary 24Vac 3-point Rotary 230Vac 2-point reversing/ modulating
Torque Nm 2
RM3601
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
53
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
54
Damper Actuators
Damper Actuators
Non-Spring Return MD5A, MD10A, MD20A, MD40A
The MD...A are 2-10V modulating damper actuators designed for operating air control dampers in ventilation and air conditioning systems for building services installations. As an accessory, these modulating actuators have a fully adjustable auxiliary switch unit. Power supply Connection cable Input signal range X Input resistance Operating range Synchronisation tolerance Position feedback Y Direction of rotation Angle of rotation Running time Position indication 24 V AC 20%, 50-60 Hz, 24 V DC 20% 1 m, 40.75 mm2 (AWG 18) 0-10 V DC 100 k Ohm 2-10 V DC (for set angle of rotation) 5% 2-10 V DC (max. 1 mA) Reversible with switch 0 / 1 at switch position 0 resp 1 150 s Mechanical Manual override Standards conformity EMC, emission EMC, immunity Protection class Enclosure rating Ambient humidity Ambient temperature Operation Storage Maintenance
Torque Nm 5 10 20 40 Power Consumption In operation 1W 2W 2W 4.5 W At rest 0.4 W 0.4 W 0.4 W 2W For wire sizing 2 VA 4 VA 4 VA 6.5 VA
Description MD5 MD10 For air control dampers area approx. 1 m approx. 2 m Clamp on top Clamp on bottom* Clamp on top Clamp on bottom Clamp on top Clamp on bottom Damper spindle Spindle length, mm min 37 min 40 min 20 min 48 min 20 min 52 min 20 Spindle diameter, mm 6-20 8-26.7 8-20 10-20 10-20 12-26.7 12-26.7
MD20
approx. 4 m
MD40
approx. 8 m
* Optional accessory K-MD10 part number 914-1062-000 For damper actuator accessories see page 57.
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
Damper Actuators
55
The MD...B are on/off damper actuators designed for operating air control dampers in ventilation and air conditioning systems for building services installations. The actuators are available in 24V AC/DC or 230V AC versions. Versions available with integrated end point switch (-S types). Auxiliary switch also available as an accessory. Connection cable Actuator Auxiliary switches (-S) Angle of rotation Running time Direction of rotation Angle of Rotation Position indication Auxiliary switch Switching point 1 m, 30.75 mm (AWG 18)
2
Standards conformity EMC, emission EMC, immunity LVD Safety; MD5B-230(-S) Protection class MD..B-24(-S) MD..B-230(-S) Enclosure rating Ambient humidity Ambient temperature Operation Storage Maintenance -30 to +50C -40 to +80C Maintenance free III Safety extra-low voltage II Totally insulated IP 54 95% RH, non condensing EN61000-6-3: 07 EN 61000-6-2: 05 EN 60730-1/2-14 1 m, 30.75 mm2 (AWG 18) 150 s Reversible with switch 0 / 1 at switch position 0 resp 1 Max 95 (adjustable by mechanical stops) Mechanical 1 mA to 3 (0.5) A, 250 V AC (adjustable 0-100% )
Part number 875-1001-000 875-1003-000 875-1005-000 875-1007-000 875-1011-000 875-1015-000 875-1021-000 875-1025-000 875-1035-000
Description MD5B-230 MD5B-230-S MD5B-24 MD5B-24-S MD10B-230 MD10B-24 MD20B-230 MD20B-24 MD40B-24
Torque Nm 5 5 5 5 10 10 20 20 40
Power supply 230Vac -60%/+15% 230Vac -60%/+15% 24Vac/dc20% 24Vac/dc20% 230Vac -60%/+15% 24Vac/dc20% 230Vac -60%/+15% 24Vac/dc20% 24Vac/dc20%
Power Consumption In operation 1.5 W 1.5 W 1W 1W 2.5 W 1.5 W 2.5 W 2W 4W At rest 0.4 W 0.4 W 0.2 W 0.2 W 0.6 W 0.2 W 0.6 W 0.2 W 2W For wire sizing 3.5 VA 3.5 VA 1.5 VA 1.5 VA 5.5 VA 3.5 VA 6 VA 4 VA 6 VA
Damper spindle
Spindle diameter mm
2011 Schneider Electric. All rights reserved.
Clamp on top Clamp on bottom* Clamp on top Clamp on bottom Clamp on top Clamp on bottom
MD20
approx. 4 m
MD40
approx. 8 m
* Optional accessory K-MD10 part number 914-1062-000 For damper actuator accessories see page 57.
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
56
Damper Actuators
Damper Actuators
Spring Return LF24, LF230, LF24-SR
The LF series are compact, low-torque, spring return damper actuators suitable for controlling air dampers up to 0.8m cross sectional area. The LF24 and LF230 versions are on/off controlled. The LF24-SR version is for 0-10V modulating control with 2-10V position feedback
Connection cable Angle of rotation Torque Spring return Running time Actuator Spring return Direction of rotation Position indication
20.75 mm2 (AWG 18) Max. 95 (adjustable 37-100% with additional limit stop ZDB-LF)
Standards conformity EMC, emission EMC, immunity LVD Safety; LF230 Enclosure rating EN 55014-1 EN61000-6-2 EN 60730-1/-2-14 IP 54 95% RH, non condensing
Min. 4 Nm (3 ft-lbf)
40-75 s (0-4 Nm (0-3 ft-lbf)) Approx. 20 s (at -20 to +50C) max. 60 s (at -30C) Selected by mounting L/R Mechanical
Torque Nm 4 4 4
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
Damper Actuators
57
MD10 SR
The MD10 SR is a compact spring return damper actuator for the operation of ventilation dampers up to 2m2 in building service installations
Motor Torque Spring Return Running Time, Motor Modulating On/off Spring Return
Manual Override Adjustable angle of rotation Position indication Protection Class 24V versions 230V Versions Degree of Protection
5mm Hex key crank, supplied plus interlocking switch 0 to Max 95 Mechanical III Extra low Voltage II Totally insulated IP54
Ambient Temperature
Operation Temperature Sound power level Motor Spring return Service Life Maintenance Weight Ambient Humidity Storage (non operation)
-30C to + 50C -40C to + 80C 40 dB (mod.) 45dB (on/off) 62 dB Min.60,000 emergency positions Maintenance free 2.1Kg 95% r.h. Non condensing
Type Designation MD10 SR-24/230T 1M54 00 MD10 SR-24/230FTS 1M54 00 MD10 SR-24T 1M54 00 MD10 SR-24TS 1M54 00 MD10 SR-24M 1M54 00
Torque Nm 10 10 10 10 10
Power Supply 24-240V AC / 24-125V DC 24-240V AC / 24-125V DC 24V AC/DC 24V AC/DC 24V AC/DC
Power Consumption In Operation 6W 6W 6W 6W 3.5W At Rest 2.5W 2.5W 2.5W 2.5W 2.5W For wire sizing 9.5VA 9.5VA 8.5VA 8.5VA 5.5VA
Spindle Clamp
Damper Spindle Attachment Clamp on Top Clamp on Bottom With Insert Without Insert With Insert Without Insert 15 mm Spindle Length 85 mm Spindle Diameter 10 - 22mm 19 - 25.4 mm 10 - 22mm 12-18mm 10 mm 12-18 mm 10 mm 19-25.4mm 14 - 25.4 mm Spindle Diameter Spindle Diameter 14 - 25.4 mm
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
58
Damper Actuators
MD20 SR
The MD10 SR is a compact spring return damper actuator for the operation of ventilation dampers up to 4m2 in building service installations
Motor Torque Spring Return Running Time, Motor Modulating On/off Spring Return
Manual Override Adjustable angle of rotation Position indication Protection Class 24V versions 230V Versions Degree of Protection
5mm Hex key crank, supplied plus interlocking switch 0 to Max 95 Mechanical III Extra low Voltage II Totally insulated IP54
Ambient Temperature
Operation Temperature Sound power level Motor Spring return Service Life Maintenance Weight Ambient Humidity Storage (non operation)
-30C to + 50C -40C to + 80C 40 dB (mod.) 45dB (on/off) 62 dB Min.60,000 emergency positions Maintenance free approx. 2.1Kg 95% r.h. Non condensing
Type Designation MD20 SR-24/240T 1M54 00 MD20 SR-24/240TS 1M54 00 MD20 SR-24T 1M54 00 MD20 SR-24TS 1M54 00 MD20 SR-24M 1M54 00
Torque Nm 20 20 20 20 20
Power Supply 24-240V AC / 24-125V DC 24-240V AC / 24-125V DC 24V AC/DC 24V AC/DC 24V AC/DC
Power Consumption In Operation 6.5W 6.5W 5W 5W 5W At Rest 3.3W 3.3W 2.5W 2.5W 3W For wire sizing 18VA 18VA 7.5VA 7.5VA 7VA
2011 Schneider Electric. All rights reserved.
Spindle Clamp
Damper Spindle Attachment Clamp on Top Clamp on Bottom With Insert Without Insert With Insert Without Insert 15 mm Spindle Length 85 mm Spindle Diameter 10 - 22mm 19 - 25.4 mm 10 - 22mm 19-25.4mm 10 mm 12-18 mm 10 mm 12-18mm 14 - 25.4 mm Spindle Diameter Spindle Diameter 14 - 25.4 mm
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
Damper Actuators
59
Actuators Name Description Part number MD5 MD10 MD20 MD40 LF MD10 SR MD20 SR
AV8-25
Shaft extension Length approx. 250 mm For damper spindles 8-25 mm dia. or 10-25 mm square
914-1023-010
K-MD10
914-1062-000
KH8
Universal damper crank arm Zinc-plated steel For damper spindles 10-18 mm dia. or 10-14 mm square Slot width 8.2 mm
914-1021-000
ZG-MDSR
914-1046-000
ZDB-LF
914-1045-000
ZG-MD20
Parallel lever linkage kit Mounting plate adaptor for antirotation strap-- Retrofitting MD20 SR or MD10 SR from AF installation
914-1063-000
Z-AF
914-1047-000
Electrical Accessories
Actuators Name Description Part number MD5 MD-S1 Auxiliary switch, add-on 1xSPDT 1mA3(0.5)A, 250V AC Auxiliary switch, add-on 2xSPDT 1mA3(0.5)A, 250V AC 914-1060-000 x MD10 x MD20 x MD40 x LF MD10 SR / MD20 SR
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
MD-S2
914-1061-000
60
Appendix
Water Valve Sizing Chart
Pressure drop
kPa 2000 1500 1000 800 600 500 400 300 200 400 Capacity Kv (m3/h atDp = 100 kPa) 0.25 0.40 0.63 1.0 1.6 2.5 4.0 6.3 10 12.5 16 20 25 32 40 50 63 80 100 125 160
250
100 80 70 60 50 40 30 20
10 8 7 6 5 4 3 2
1 0,01
0,02
0,03 0,04
0,2
0,8 1
5 6 7 8 9 10
20
30
40 50 60
80 100
200 l/s
Flow
Valve sizing formulae for water service In order to size a valve, the following must be known:The volumetric ow rate through the valve, Q. The differential pressure across the valve, P. The following calculations assume the uid has a Specic Gravity ratio of 1.0. Calculation of valve ow coefcient, Kv
2011 Schneider Electric. All rights reserved.
Kv =
Q P
= Kv P
Q =
Kv
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
61
Mark the point of intersection [3] between the line originating from the absolute upstream pressure [1] and the inclined line corresponding to the load pressure (valve pressure drop)[2]. Identify the point of intersection between point [3] found above and the ow rate of Saturated steam [4] The last found point would corresponds to a valve with a Kvs of 63 [5]
G = Mass ow rate (Kg/h) v2 = Specic volume (from steam table) for p2 and t1 condition V* = Specic volume (from steam table) for and t1 condition p1 = pressure before valve p2 = pressure after valve p = Valve Pressure drop (bar)
lve Va
pr
s es
ur
2
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
(lo p , op Pa dr k
ad
pr
es
r su
e)
62
Specification Code
V
Valve Type: G - Globe GS - Globe (Steam Service) B - Ball F - Butterfly S - Shoe Z - Zone-Linear
End Connection: E - G external thread (G.B) R - Rp /Rs internal thread F- Flanged DIN N - NPT C - Compression W - Flanged (Wafer) Actuator ConnectionLinear Valves: 0 - Short-Yoke U-Bolt Forta 1 - Standard Yoke U-Bolt Forta 8 - M30 x 1.5 (2.5mm stroke) 9 - M30 x 1.5 (5.5mm stroke)
Material: C - Cast Iron body CS - Cast Iron body, SS Seat B - Bronze body, Brass plug BP - Bronze body, PPS plastic trim BS - Bronze body, SS trim N - Nodular Iron NS - Nodular Iron, SS seat NZ - Nodular Iron, Zinc coated stem
Stem Closed Direction-Linear Valves: SU - Stem up closed (Normally Closed) SD - Stem down closed (Normally Open)
Plug / Disc (flow) Type: 0 - Uncharacterised 1 - Equal percentage, Non-Balanced plug 2 - Equal percentage, Balanced plug
V
Valve Type Number of Ways Plug Type End Connection Actuator Connection
Orifice
Material
Specification Code
M
Actuator Type: G - Globe B - Ball F - Butterfly S - Shoe Z - Zone D - Damper R - Radiator Force -linear: 90 - 90N 100 - 100N 400 - 400N 800 - 800N 1500 - 1500N
S R
Variation C - Short yoke (compact)
Spring Return: SR - Spring Return Blank - (no Spring Return)
Variation
Control: F - Floating - 3P M - Modulating FM - Dual 3 point and modulating L = LON T - Two position (on/off)
Stem Return direction: U - stem Up D - stem Down O - spring return valve Open C - spring return - valve Closed
M
Valve Type Force
Spring Return Coding: SU - Spring return Up SD - Spring return Down SO - Spring return Open SC - Spring return Closed NC - Normally Closed (thermic) NO - Normally Open (thermic)
Schneider Electric
VACAT_July2011
Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
July 2011
ao
63
Notes
Schneider Electric Telephone Europe: Malm, Sweden +46 40 38 68 50 Telephone Asia Pacific: Singapore +65 6776 3166 www.schneider-electric.com
VACAT_July2011 July 2011
ao
Schneider Electric
Malm, Sweden +46 40 38 68 50 Rockford, IL +1 888 444 1311 Singapore +65 6776 3166 http://www.schneider-electric.com/buildings
All brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice.
VACAT_July2011
July 2011 ao