Scribd
Upload
66 views2 pages

BAE 70000 ME DS 0003 Datasheet For Heat Exchanger (Plate)

Uploaded by

Hiếu Nguyên
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
66 views2 pages

BAE 70000 ME DS 0003 Datasheet For Heat Exchanger (Plate)

Uploaded by

Hiếu Nguyên
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

CONSULTANTS:

Doc. No : Rev No : Page :

21006-BAE-70000-ME-DS-0003 A0 Total 2 pages

TGT FIELD DEVELOPMENT SUPPLY OF LEASED FPSO

DATASHEET FOR HEAT EXCHANGER (PLATE)

A0
Rev.

17-Nov-09
Date

ISSUE FOR REVIEW


Description

SOK
Prep.

NTL
Chk.

NZM
Engr.

HH Appr.

Doc No: Rev No: Page: 1 CONFIGURATION FOR EXCHANGER AND PLATE DETAILS 2 Number of PHE in parallel 3 Number of PHE in series 4 Number of passes, hot side 5 Number of passes, cold side 6 Rel. directions of fluids 7 Nominal plate gap 8 DESIGN DATA 9 Pressure vessel code 10 Material certificate type 11 Code stamp 12 Applicable specifications 13 Local rules and regulations 14 Local register of exchanger 15 16 Test pressure 17 MAWP 18 Velocity between plates 19 Wall shear stress 20 Volume liquid per PHE 21 Length/width/height 22 Mass empty/full of water 23 24 CONNECTIONS 25 Nozzle size 26 Flange rating/type 27 COMPONENT 28 PHE type 29 Plates 30 PHE gasket fixing 31 PHE gaskets hot side/cold side / 32 Cover fixed/movable / 33 Tie bolts/nuts / 34 Connection design 35 Nozzle pipes/flanges 36 Corrosion allow on conn. 37 Stud bolts/nuts 38 Shroud 39 Drip tray 40 Painting specification 41 Insulation 42 43 LOADING 44 Connection loads/moments 45 Wind loading 46 Explosion blast pressure 47 Earthquake loading 48 Transport loading at sea 49 50 TESTING AND INSPECTION 51 Specific drying procedure 52 Dried by blowing air 53 Non-destructive testing in addition to the code 54 Inspection required 55 Standard ( ) None Yes Mfg. std. Yes ( ) ( ) ( ) ( ) (mm) Studded ( ) Glued ( ) Gasketed ( ) (Nominal) / / IN OUT [bar (ga)] [bar (ga)] (m/s) (Pa) (m3) (mm) (kg) / HOT SIDE Yes ( ) Cocurrent/countercurrent (mm)

21006-BAE-70000-ME-DS-0003 A0 1

Heat transfer area/PHE Heat transfer area/plate Number of plates per PHE Max. number of plates per PHE Plate chevron angle(s) Nominal plate thickness

(m2) (m2)

(mm)

No

( )

COLD SIDE

IN / MATERIALS Semi-welded Not glued / / / Flanged nozzle

OUT / ( ) ( ) Welded ( )

( )

Spray No Purchaser spec. No

( ) ( ) ( ) ( )

Fire By others By others

( ) ( ) ( )

Severe duty

( )

Purchaser spec.

( )

Yes Yes Purchaser

( ) ( ) ( )

No No Third party

( ) ( ) ( )

You might also like