Scribd
Upload
117 views

Abaqus Tutorial2

This document provides instructions for conducting a finite element analysis (FEA) simulation in Abaqus. It includes steps for importing a CAD model, assigning materials and sections, meshing, applying boundary conditions and loads, creating job steps, and reviewing results. The model represents a composite part made of steel and aluminum and includes two load cases, with instructions provided for all necessary modeling, setup, and analysis tasks in Abaqus.

Uploaded by

asimbuyuk
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
117 views

Abaqus Tutorial2

This document provides instructions for conducting a finite element analysis (FEA) simulation in Abaqus. It includes steps for importing a CAD model, assigning materials and sections, meshing, applying boundary conditions and loads, creating job steps, and reviewing results. The model represents a composite part made of steel and aluminum and includes two load cases, with instructions provided for all necessary modeling, setup, and analysis tasks in Abaqus.

Uploaded by

asimbuyuk
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 40

http://onlyamodel.

com/2011/introduction-to-abaqus-fea-tutorial/

Abaqus Tutorial

*Node 1, 2, 3, 4, 5, 6, 7, 8, 9,

75., 50., 25., 0., 75., 50., 25., 0., 75.,

150., 150., 150., 150., 125., 125., 125., 125., 100.,

-100. -100. -100. -100. -100. -100. -100. -100. -100.

*Element, type=C3D8R 1, 920, 921, 1004, 945, 915, 916, 941, 940 2, 921, 922, 1005, 1004, 916, 917, 942, 941 3, 922, 923, 1006, 1005, 917, 918, 943, 942 4, 923, 924, 946, 1006, 918, 919, 944, 943 5, 945, 1004, 1007, 958, 940, 941, 954, 953 6, 1004, 1005, 1008, 1007, 941, 942, 955, 954 7, 1005, 1006, 1009, 1008, 942, 943, 956, 955 8, 1006, 946, 959, 1009, 943, 944, 957, 956

*Elset, elset="AL set", generate 1, 320, 1 *Elset, elset="Steel Set", generate 321, 960, 1 ** Section: Al section *Solid Section, elset="AL set", material=Al ** Section: Steel section *Solid Section, elset="Steel Set", material=Steel ** ** MATERIALS ** *Material, name=Al *Elastic 70., 0.3 *Material, name=Steel *Elastic 210., 0.3 **

*Nset, nset=Set-1, instance=Part-1-1 384, 385, 386, 387, 412, 413, 414, 415, 422, 423, 424, 425, 432, 433, 434, 435 442, 443, 444, 445, 688, 695, 702, 709, 716 ** BOUNDARY CONDITIONS ** ** Name: BC-1 Type: Symmetry/Antisymmetry/Encastre *Boundary Set-1, ENCASTRE

*Elset, elset=_Surf-1_S2, internal, instance=Part-1-1, generate 1, 16, 1 ** STEP: Step-1 ** *Step, name=Step-1, perturbation *Static ** ** LOAD CASES ** *Load Case, name=LoadCase-1 ** Name: BC-1 Type: Symmetry/Antisymmetry/Encastre Scale factor: 1 *Boundary, op=NEW Set-1, ENCASTRE ** Name: Load-1 Type: Surface traction Scale factor: 1 *Dsload, op=NEW, constant resultant=YES Surf-1, TRSHR, -1., 0., 1., 0. *End Load Case *End Step

*Elset, elset=_Surf-1_S2, internal, instance=Part-1-1, generate 1, 16, 1 ** STEP: Step-2 ** *Step, name=Step-2, perturbation *Static ** LOAD CASES ** *Load Case, name=LoadCase-2 ** Name: BC-1 Type: Symmetry/Antisymmetry/Encastre Scale factor: 1 *Boundary, op=NEW Set-1, ENCASTRE ** Name: Load-2 Type: Surface traction Scale factor: 1 *Dsload, op=NEW Surf-1, TRVEC, 1., 1., 0., 0. *End Load Case *End Step

Execute Abaqus CAE

Import .sty file fro ProE

Steel part (imported from ProE) Material -> Create steel material properties

Steel part (imported from ProE) Section -> Create steel section properties

Section Assignment->Create (Assign steel section to steel region)

Section Assignment->Create (Assign steel section to steel region)

It turns green

Repeat Material, Section, Section Assignment for Al part

Seed Mesh (use same global size for both parts)

Mesh Part (try other options if you are a daring sort)

Repeat for Al region

Assembly-> Instances (assemble parts into assembly)

Assembly-> Instances (assemble parts into assembly)

Instances-> Merge Cut (Join parts and eliminate duplicate nodes)

Instances-> Merge Cut (Join parts and eliminate duplicate nodes)

Instances-> Merge Cut (Join parts and eliminate duplicate nodes)

Instances-> Merge Cut (Join parts and eliminate duplicate nodes)

Instances-> Merge Cut (Join parts and eliminate duplicate nodes)

BCs-> Create

BCs-> Create

Step(s)-> Create

Loads->Create

Load Case->Create

Create step, load and load case for second load case

Jobs -> Create

Job-1->Monitor

Job-1->Results

Stress = S Von Mises stress = Mises

You might also like