Scribd
Upload
1K views

Part-7 PG 98-109

The document provides recommendations for rolled hollow section (RHS) and square hollow section (SHS) sizes for girders, eave beams, tie runners, and purlins based on wind speed and roof slope to support corrugated galvanized iron sheeting for roof spans of 3.0 to 9.0 meters. Tables list the recommended sections for various roof components and design considerations like permissible deflection and grade of steel.

Uploaded by

cjm
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Part-7 PG 98-109

The document provides recommendations for rolled hollow section (RHS) and square hollow section (SHS) sizes for girders, eave beams, tie runners, and purlins based on wind speed and roof slope to support corrugated galvanized iron sheeting for roof spans of 3.0 to 9.0 meters. Tables list the recommended sections for various roof components and design considerations like permissible deflection and grade of steel.

Uploaded by

cjm
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

DESIGN TABLE OF PURLIN, GIRT, EAVE BEAM, TIE RUNNER

RECOMMENDED RHS/SHS FOR GIRT

3.0
4.5
6.0
7.5
9.0

WIND SPEED
33 m/s
RHS 66X33X2.6
(@ 3.69 Kg/m)
RHS 66X33X3.6
(@ 4.93 Kg/m)
RHS 80X40X4.8
(@ 7.85 Kg/m)
RHS 96X48X4.8
(@ 9.66 Kg/m)
RHS122X61X4.5
(@ 11.88 Kg/m)

WIND SPEED
39 m/s
RHS 66X33X2.6
(@ 3.69 Kg/m)
RHS 80X40X3.2
(@ 5.5 Kg/m)
RHS 96X48X4.0
(@ 8.22 Kg/m)
RHS122X61X3.6
(@ 9.67 Kg/m)
RHS122X61X5.4
(@ 14.01 Kg/m)

WIND SPEED
44 m/s
RHS 66X33X2.6
(@ 3.69 Kg/m)
RHS 80X40X4.0
(@ 6.71 Kg/m)
RHS122X61X3.6
(@ 9.67 Kg/m)
RHS122X61X4.5
(@ 11.88 Kg/m)
RHS 145X82X4.8
(@ 15.92 Kg/m)

WIND SPEED
47 m/s
RHS 66X33X2.9
(@ 4.07 Kg/m)
RHS 80X40X4.8
(@ 7.85 Kg/m)
RHS122X61X3.6
(@ 9.67 Kg/m)
RHS122X61X5.4
(@ 14.01 Kg/m)
RHS 145X82X4.8
(@ 15.92 Kg/m)

WIND SPEED
50 m/s
RHS 66X33X2.9
(@ 4.07 Kg/m)
RHS 96X48X3.2
(@ 6.71 Kg/m)
RHS122X61X3.6
(@ 9.67 Kg/m)
RHS 145X82X4.8
(@ 15.92 Kg/m)
RHS 145X82X5.4
(@ 17.74 Kg/m)

WIND SPEED
55 m/s
RHS 80X40X2.6
(@ 4.55 Kg/m)
RHS 96X48X4.0
(@ 8.22 Kg/m)
RHS122X61X5.4
(@ 14.01 Kg/m)
RHS 145X82X4.8
(@ 15.92 Kg/m)
RHS 172X92X4.8
(@ 18.71 Kg/m)

REMARK

C.G.I. SIDE GIRT SHEETING


GIRT SPACING = 1.7 m

TRUSS
SPACING(m)

RECOMMENDED RHS/SHS FOR EAVES BEAM & TIE RUNNER


TRUSS SPACING(m)
EAVES BEAM
TIE RUNNER

3.0

4.5

6.0

7.5

9.0

RHS 66X33X2.6

RHS 96X48X3.2

RHS 122X61X3.6

RHS 145X82X4.8

RHS 172X92X5.4

(@3.69 Kg/m)

(@6.71 Kg/m)

(@9.67 Kg/m)

(@15.92 Kg/m)

(@17.74 Kg/m)

SHS 25 X25X2.6

SHS38 X38 X2.6

SHS 50X50X2.6

SHS 72X72X3.2

SHS 72X72X3.2

(@1.69 Kg/m)

(@2.75 Kg/m)

(@3.74 Kg/m)

(@6.71 Kg/m)

(@6.71 Kg/m)

NOTE :
1)

SIZES ARE ABOVE ARE DETERMONED BY MAXIMUM ALLOWABLE SLENDERNESS RATIO 250 FOR EAVES BEAM AND 350 FOR TIE RUNNER.

2)

ABOVE SECTION GENERALLY SATISFY OTHER DESIGN REQUIREMENT, STILL IT IS ADVISABLE TO CHECK FOR THE COMPRESSION DUE TO
BRACING FORCE AS THE CASE MAY BE.

PURLIN TABLE FOR SINGLE SECTION


SPAN

SPEED 33

SPEED 39

3M
4.5 M
6M
7.5 M

RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 122X61X5.4

RHS 66X33X2.6
RSH 96X48X3.2
RHS 122X61X3.6
RHS 122X61X5.4

3M
4.5 M
6M
7.5 M

RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

3M
4.5 M
6M
7.5 M

RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

DESIGN CONSIDERATIONS
GRADE OF STEEL FOR PURLINS
MOMENT
DEFLECTION
PERMISSIBLE DEFLECTION

98

=
=
=
=

SPEED 44
SLOPE 1 IN 3
RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 122X61X5.4
SLOPE 1 IN 4
RHS 80X40X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8
SLOPE 1 IN 10
RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

YST-310
WL^2/10
0.5X5XWL^4/(384XEXI)
L/200

SPEED 47

SPEED 50

SPEED 55

RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 122X61X5.4

RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 122X61X5.4

RHS 80X40X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 122X61X5.4

RHS 80X40X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

RHS 80X40X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

RHS 80X40X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

RHS 66X33X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

RHS 80X40X2.6
RHS 96X48X3.2
RHS 122X61X3.6
RHS 145x82x4.8

DELECTION CONSIDERED

PURLIN SPACING
SHEETING

=
=

ONLY DOWNWARD DEFLECTION CONSIDERED


FOR DEFLECTION CRITERION(DL+LL)
1500 MM
CGI

PURLIN TABLE FOR BUILTUP SECTION


SLOPE 1 IN 3
SPAN

SPEED 33

SPEED 39

SPEED 44

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

7.5M

RHS 66X33X2.9

RHS 50x25x2.6

400

RHS 66X33X2.9

RHS 50x25x2.6

400

RHS 66X33X2.9

RHS 50x25x2.6

400

9.0M

RHS 96X48X3.2

RHS 50x25x2.6

300

RHS 96X48X3.2

RHS 50x25x2.6

300

RHS 96X48X3.2

RHS 50x25x2.6

300

10.5M

RHS 122X61X3.6

RHS 50x25x2.6

325

RHS 122X61X3.6

RHS 50x25x2.6

325

RHS 122X61X3.6

RHS 50x25x2.6

325

12M

RHS 122X61X3.6

RHS 66X33X2.6

400

RHS 122X61X3.6

RHS 66X33X2.6

400

RHS 122X61X3.6

RHS 66X33X2.6

400

SPAN

SPEED 47

SPEED 50

SPEED 55

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

7.5M

RHS 66X33X2.9

RHS 50x25x2.6

400

RHS 66X33X2.9

RHS 50x25x2.6

400

RHS 66X33X2.9

RHS 50x25x2.6

400

9.0M

RHS 96X48X3.2

RHS 50x25x2.6

300

RHS 96X48X3.2

RHS 50x25x2.6

300

RHS 96X48X3.2

RHS 50x25x2.6

300

10.5M

RHS 122X61X3.6

RHS 50x25x2.6

325

RHS 122X61X3.6

RHS 50x25x2.6

325

RHS 122X61X3.6

RHS 50x25x2.6

325

12M

RHS 122X61X3.6

RHS 66X33X2.6

400

RHS 122X61X3.6

RHS 66X33X2.6

400

RHS 122X61X3.6

RHS 66X33X2.6

400

SLOPE 1 IN 4
SPAN

SPEED 33

SPEED 39

SPEED 44

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

7.5M

RHS 66X33X2.9

RHS 50x25x2.6

325

RHS 66X33X2.9

RHS 50x25x2.6

325

RHS 66X33X2.9

RHS 50x25x2.6

325

9.0M

RHS 96X48X3.2

RHS 50x25x2.6

300

RHS 96X48X3.2

RHS 50x25x2.6

300

RHS 96X48X3.2

RHS 50x25x2.6

300

10.5M

RHS 122X61X3.6

RHS 50x25x2.6

325

RHS 122X61X3.6

RHS 50x25x2.6

325

RHS 122X61X3.6

RHS 50x25x2.6

325

12M

RHS 122X61X3.6

RHS 66X33X2.6

400

RHS 122X61X3.6

RHS 66X33X2.6

400

RHS 122X61X3.6

RHS 66X33X2.6

400

SPAN

SPEED 47

SPEED 50

SPEED 55

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

7.5M

RHS 66X33X2.9

RHS 50x25x2.6

325

RHS 66X33X2.9

RHS 50x25x2.6

325

RHS 66X33X2.9

RHS 50x25x2.6

325

9.0M

RHS 96X48X3.2

RHS 50x25x2.6

300

RHS 96X48X3.2

RHS 50x25x2.6

300

RHS 96X48X3.2

RHS 50x25x2.6

300

10.5M

RHS 122X61X3.6

RHS 50x25x2.6

325

RHS 122X61X3.6

RHS 50x25x2.6

325

RHS 122X61X3.6

RHS 50x25x2.6

325

12M

RHS 122X61X3.6

RHS 66X33X2.6

400

RHS 122X61X3.6

RHS 66X33X2.6

400

RHS 122X61X3.6

RHS 66X33X2.6

400

SLOPE 1 IN 10
SPAN

7.5M

SPEED 33

SPEED 39

SPEED 44

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

RHS 66X33X2.6

RHS 50x25x2.6

300

RHS 66X33X2.6

RHS 50x25x2.6

300

RHS 66X33X2.6

RHS 50x25x2.6

300

9.0M

RHS 66X33X2.6

RHS 50x25x2.6

300

RHS 66X33X2.6

RHS 50x25x2.6

300

RHS 66X33X2.6

RHS 50x25x2.6

300

10.5M

RHS 96X48X3.2

RHS 50x25x2.6

325

RHS 96X48X3.2

RHS 50x25x2.6

325

RHS 96X48X3.2

RHS 50x25x2.6

325

12M

RHS 96X48X4

RHS 50x25x2.6

450

RHS 96X48X4

RHS 50x25x2.6

450

RHS 96X48X4

RHS 50x25x2.6

450

SPAN

SPEED 47

SPEED 50

SPEED 55

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

TOP
MEMBER

BOT
MEMBER

C/C
DISTANCE

7.5M

RHS 66X33X2.6

RHS 50x25x2.6

300

RHS 66X33X2.6

RHS 50x25x2.6

300

RHS 66X33X2.6

RHS 50x25x2.6

300

9.0M

RHS 66X33X2.6

RHS 50x25x2.6

300

RHS 66X33X2.6

RHS 50x25x2.6

300

RHS 66X33X2.6

RHS 50x25x2.6

300

10.5M

RHS 96X48X3.2

RHS 50x25x2.6

325

RHS 96X48X3.2

RHS 50x25x2.6

325

RHS 96X48X3.2

RHS 50x25x2.6

325

12M

RHS 96X48X4

RHS 50x25x2.6

450

RHS 96X48X4

RHS 50x25x2.6

450

RHS 96X48X4

RHS 50x25x2.6

450

DESIGN CONSIDERATIONS
GRADE OF STEEL FOR PURLINS
MOMENT
DEFLECTION
PERMISSIBLE DEFLECTION
PURLIN SPACING
SHEETING

=
=
=
=
=
=

YST-310
WL^2/10
0.5X5XWL^4/(384XEXI)
L/200
1500 MM
CGI

99

TYPICAL DETAILS
Typical Details of Truss Support

Notes :

100

1)

All base plate sizes and bolt dia shall be


designed for actual forces

2)

All bolts are of grade (B) class 4.6.

3)

Open ends of all members shall be sealed.

Alternate Detail of Pinned support for Truss

101

Typical Details of Purlin, Purlin-prop, Tie-Runner and Hanger

Notes :

102

1)

The details are based on the worst design


loading for the group and may be improved
upon based on actual loading.

2)

Side Runner connection shall be similar


Unless Otherwise required.

3)

Unless Otherwise Noted:


a) All dimensions are in Millimetre.
b) All welds are 4 thk. fillet.
c) All bolts are of grade (B) class 4.6.

4)

Open ends of all members shall be sealed.

Typical Details of Shop & Field Splices

Notes :
1)

The details are based on the worst


design loading for the group and may be
improved upon based on actual loading.

2)

Unless Otherwise Noted:


a) All dimensions are in Millimetre.
b) All welds are 4 thk. fillet

3)

Open ends of all members shall be


sealed.
103

Typical Details of Portal Frame

104

Typical Details of Portal Frame

105

Typical Details of Portal Frame

106

Typical Details of 12m Span Truss

107

Typical Details of Lean to Truss

Notes :

108

1)

The details are based on the worst design loading for the
group and may be improved upon based on actual loading.

2)

Unless Otherwise Noted:


a) All dimensions are in Millimeter.
b) All welds are 4 thk. fillet
c) All bolts areof grade (B) class 4.6.

3)

Open ends of all members shall be sealed.

Typical Details of North Light Truss

Notes :
1)

The details are based on the worst design loading for the
group and may be improved upon based on actual loading.

2)

Unless Otherwise Noted:


a) All dimensions are in Millimeter.
b) All welds are 4 thk. fillet
c) All bolts areof grade (B) class 4.6.

3)

Open ends of all members shall be sealed.

4)

Bolt locations are tentative and may be adjusted to suit


Girder configuration.

109

You might also like