Scribd
Upload
3K views2 pages

14 Pin Compaq Power Supply Connector For Power Supply Model PDP

This document provides information about a 14-pin power supply connector used in some older Compaq systems: 1) The connector is for the Compaq Power Supply model PDP-115 and is used in Compaq Deskpro EN/EP SFF series computers. 2) It lists the pin numbers, descriptions, and colors for the 14 pins in the connector. 3) It notes that pin 4 (ON/STBY) needs to be connected to pin 5 (+5v AUX) in order to turn the power supply on.

Uploaded by

prestala
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3K views2 pages

14 Pin Compaq Power Supply Connector For Power Supply Model PDP

This document provides information about a 14-pin power supply connector used in some older Compaq systems: 1) The connector is for the Compaq Power Supply model PDP-115 and is used in Compaq Deskpro EN/EP SFF series computers. 2) It lists the pin numbers, descriptions, and colors for the 14 pins in the connector. 3) It notes that pin 4 (ON/STBY) needs to be connected to pin 5 (+5v AUX) in order to turn the power supply on.

Uploaded by

prestala
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

14 pin Compaq Power Supply Connector for power supply model PDP-115 (Valid for Compaq Power Supply

P/N 165997-001) used on Compaq Deskpro EN/EP SFF series, for Compaq P/N 216922 and 218584. Pin Pin Description Number Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 +3.3V -12V FO ON +5V FC +12V +3.3V +3V GND +5V GND +5V GND +3.3V [Brown] -12V [Blue] FAN OFF [Violet] ON/STBY [White] +5V AUX [Green] FAN CMD [White/Red] +12V [Orange] +3.3V [Brown] +3V AUX [Pink] GND [Black] +5V [Red] GND [Black] +5V [Red] GND [Black]

Connect pin 4 (ON/STBY) with pin 5 (+5v AUX) to turn on the power supply

This non-standard ATX wiring is used in Dell Pentium II and Pentium III systems. wire side view: Color Signal Pin Pin Signal Color Gray Black Black Black White Red /PS_On 11 1 GND GND GND -5V +5V 12 2 13 3 14 4 15 5 16 6 +5V GND +5V GND Power_Good +5VSB (standby) Red Black Red Black Orange Purple

Red Red KEY (blank)

+5V +5V -

17 7 18 8 19 9

+12V -12V GND

Yellow Blue Black

Red +5V 20 10 GND Black 18 AWG is recommended for all wires except pin 11, which should be 22 AWG. For 300W configurations 16 AWG is recommended. The connector on the power supplies used in Dell Socket 478 Pentium 4 systems (and other modern Dell computers ?) is standard ATX-12v. Note: some Dell power supplies do not have the -5 (white wire), (2002 v1.2 made optional, 2004 v2.01 removed from specification)

You might also like