Scribd
Upload
645 views

Sunten Transformer User Manual

This document provides instructions and parameters for a TTC-310 Series Transformer Temperature Controller. It describes how to set parameters like auto-stir period, output state checking, and temperature compensation values for phases A, B, and C. Temperature readings can be compensated within a range of -5.0 to 5.0 degrees and output states like power on/off, over-temperature warnings, and faults can be simulated during testing. Contact information is also provided at the end for technical support.

Uploaded by

Ursula Johnson
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
645 views

Sunten Transformer User Manual

This document provides instructions and parameters for a TTC-310 Series Transformer Temperature Controller. It describes how to set parameters like auto-stir period, output state checking, and temperature compensation values for phases A, B, and C. Temperature readings can be compensated within a range of -5.0 to 5.0 degrees and output states like power on/off, over-temperature warnings, and faults can be simulated during testing. Contact information is also provided at the end for technical support.

Uploaded by

Ursula Johnson
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 19

TTC-310

TTC-310 Series Transformer Temperature Controller

STTC1.0

After the value setting, press key

system will return to the parameter selecting state.

Note: The system considers 0 auto- stir period as cancel this function. Concerning the modification of P-013 please refer to that instruction of P-012. P-014 output state checking: check the output state and contact point of temperature controller by setting figures and simulating test temperature changes.
fun power off fun indicator light off

fun power on fun indicator light on

over-temperature trip indicator light on

Over-temperature trip indicator light off

over-temperature warning act warning indicator light on

fault indicator light off

fault indicator light on

over-temperature warning off warning indicator light off

During the output state checking, press key system will return to the parameter selecting state. The tolerance of over temperature warning and over temperature trip circle is 5C. parameter in this table is just reference value and the actual setting value is standard. Note: To prevent transformer error trip, when output state checking stimulating temperature trip, the over-temperature relay haven't any action, only the over-temperature indicator light on and the alert sound.

enter function operating state

enter phase A temperature compensation

indicate phase A uncompensated

phase A compensation value

compensation range -5.0 5.0

enter phase B temperature compensation

Compensation range -5.0 5.0

phase C compensation value

indicate phase C uncompensated

enter phase C temperature compensation

Compensation range -5.0 5.0

phase B compensation value

indicate phase C uncompensated

Add:288 Caixin Road,Lanhe Town, Panyu District,Guangzhou City Tel:020-84926084 Fax:020-84928084 After service hot-line:020-39970255 P.C:511480 Web:www.84926084.com

You might also like