Scribd
Upload
555 views

Origami Modular Star Print

This document provides instructions for making a modular origami star using 6 square sheets of paper. The instructions involve first making individual star modules by folding each sheet of paper, then connecting the modules by slipping the folded "legs" of one module into another and pulling the center crease outward. When all 6 modules are connected in this way, the finished origami star is complete.

Uploaded by

ฮร่า วาติ
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
555 views

Origami Modular Star Print

This document provides instructions for making a modular origami star using 6 square sheets of paper. The instructions involve first making individual star modules by folding each sheet of paper, then connecting the modules by slipping the folded "legs" of one module into another and pulling the center crease outward. When all 6 modules are connected in this way, the finished origami star is complete.

Uploaded by

ฮร่า วาติ
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Origami Modular Star

www.origami-fun.com

You will need 6 small sheets of square paper to make this star.

1. Start with your paper coloured side up. Fold in half, then in half again, as shown. Crease well, then open out again.

2. Turn the paper over and fold in half diagonally and in both directions. Crease well and open out once again.

3. Holding the points shown, bring them both down to the centre point on the bottom line. Flatten model.

4. Fold bottom corners of top layer only to top point and unfold. Repeat on back. This is one module.

5. Make 5 more modules so you have 6 altogether.

6. To join modules, slip one set of legs into another set of legs, like so:

7. Push the legs in as far as they will go.

8. Pull the centre crease outwards, making it into a mountain fold.

9. Continue to add modules to build the star, repeating steps 6-8 as you go. Finished Modular Star.

You might also like