Scribd
Upload
211 views

Interfacing Numeric Keypad With MB90F387S

This document discusses interfacing a numeric keypad to a microcontroller using a 74C922 keypad encoder integrated circuit. It describes the common 3x4 and 4x4 keypad layouts and how the 74C922 scans the columns and rows to encode which key is pressed. The 74C922 outputs a 4-bit binary code to identify the key. It also discusses reading the data availability line to know when a keypress has occurred and software approaches like interrupts to most efficiently read the keypad values.

Uploaded by

Mark Villamor
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
211 views

Interfacing Numeric Keypad With MB90F387S

This document discusses interfacing a numeric keypad to a microcontroller using a 74C922 keypad encoder integrated circuit. It describes the common 3x4 and 4x4 keypad layouts and how the 74C922 scans the columns and rows to encode which key is pressed. The 74C922 outputs a 4-bit binary code to identify the key. It also discusses reading the data availability line to know when a keypress has occurred and software approaches like interrupts to most efficiently read the keypad values.

Uploaded by

Mark Villamor
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

!

Interfacing Numeric Keypad to MB90F387S using 74C922 Keypad Encoder!

Numeric Keypad
Most common input device in embedded systems appliances Follows the telephony standard layout (3x4 or 4x4) Uses array of pushbutton switches with common columns (X) and rows (Y); eliminates individual control of all switches Can be interfaced with encoder integrated circuit

3x4 4x4

Schematic Diagram

4x4 layout

How to Control?
Supply one of the columns for example Column 1 (X1) with logic-1 while the rest is logic-0. If the one of the buttons in that column is pressed, current will flow to the corresponding row. Therefore, the column and row data will now be used to identify the specific key pressed. Move to the next column and read the row data.

0 1

0 0

0 0 1 0

Key 1 4 7 * 2 5 8 0 3 6 9 # A B C D

SW No. SW1 SW5 SW9 SW13 SW2 SW6 SW10 SW14 SW3 SW7 SW11 SW15 SW4 SW8 SW12 SW16

Column

Row 1000b

1000b

0100b 0010b 0001b 1000b

0100b

0100b 0010b 0001b 1000b

0010b

0100b 0010b 0001b 1000b

0001b

0100b 0010b 0001b

Row and Column Data

Control Using 74C922


74C922 is a CMOS key encoder that encode an array of SPST (single-pole, single-throw) switches Keyboard (keypad) scanning is implemented automatically by the IC It has an internal debounce circuitry Data Available (DAVBL) output returns a logic-1 when any of the key is pressed
Obtain datasheet at: www.alldatasheet.com

Key 1 2 3 A 4 5 6 B 7 8 9 C * 0 # D

74C922 Data Output (bin) 0000b 0001b 0010b 0011b 0100b 0101b 0110b 0111b 1000b 1001b 1010b 1011b 1100b 1101b 1110b 1111b

Hex 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F

Keys in yellow cannot be accessed in 3x4 layout.

Read DAVBL before reading 4-bit data from 74C922

Software Control
The example before shows that the keypad data will only be available if DAVBL is high. The software will continue to read DAVBL and exit the read loop only when DAVBL be equal to high. Not very efficient but it works. Most efficient method:
external interrupt (will be discussed in Unit 5) scheduling (will be covered in Unit 8)

Seatwork
Draw a flowchart for a program that will display the key pressed on the 7-segment display. Keys * & # will display 0.

LKS Expansion Board

LCD + Keypad + Stepper Motor

Sources
74C922 Datasheet

You might also like