Scribd
Upload
70 views2 pages

Fact 16

Pacemakers are devices which are implanted in cardiac patients to ensure proper heart rhythm. Electric arc welding and cutting processes produce intense electric and magnetic (electromagnetic) fields. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor.

Uploaded by

cuervohijoguacho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views2 pages

Fact 16

Pacemakers are devices which are implanted in cardiac patients to ensure proper heart rhythm. Electric arc welding and cutting processes produce intense electric and magnetic (electromagnetic) fields. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor.

Uploaded by

cuervohijoguacho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Safety and Health Fact Sheet No.

16
1998 American Welding Society

March 1997

PACEMAKERS AND WELDING

DEFINITION Pacemakers are devices which are implanted in cardiac patients to ensure proper heart rhythm. Since these devices are electrical in operation, their ability to function can be affected by strong electromagnetic fields. WELDING AND ELECTROMAGNETIC FIELDS Electric arc welding and cutting processes produce intense electric and magnetic (electromagnetic) fields. Persons with a pacemaker should not go near welding or cutting operations until they have consulted their doctor and obtained information from the manufacturer of the device. STEPS TO REDUCE EXPOSURE Pacemaker wearers should observe the following precautions: Do not use current settings higher than necessary. Keep the weld cables as close together as possible by twisting or taping them. Connect work clamp to workpiece as close to the weld as possible. Arrange cables to one side and away from the operator. Keep welding power source and cables as far away as practical. Do not weld with rapidly repeated short spurtswait about 10 seconds between each weld. If you feel sick, stop welding immediately and get medical attention. Do not work alone.

Fact Sheet No. 163/97

Page 1 of 2

TALK TO THE DOCTOR If you are getting a pacemaker and will be working with or around welding, talk with your doctor. Inform him of your occupation. Discuss your work clearly with him. Pacemakers differ, and your doctor can select one that is less likely to be affected by interference. INFORMATION SOURCES Guidant Corporation, 4100 Hamline Avenue North, St. Paul, MN 55112-5798, Phone: 800-505-4636. Medtronic, Inc., 7000 Central Avenue, N.E., Minneapolis, MN 55432-3576, Phone: 800505-4636.

Page 2 of 2

Fact Sheet No. 163/97

You might also like