Scribd
Upload
60 views

1 A

The document summarizes the structural analysis of a steel beam with the section IPE 300. The analysis verifies that the beam section satisfies all verification criteria for strength and stability, including checks for section strength, member stability, and lateral-torsional buckling. However, one verification criterion related to member stability is not satisfied, indicating an incorrect beam section was chosen.

Uploaded by

cheligp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views

1 A

The document summarizes the structural analysis of a steel beam with the section IPE 300. The analysis verifies that the beam section satisfies all verification criteria for strength and stability, including checks for section strength, member stability, and lateral-torsional buckling. However, one verification criterion related to member stability is not satisfied, indicating an incorrect beam section was chosen.

Uploaded by

cheligp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

File: Structure Addendum.

rtd
Project: Structure Addendum

STEEL DESIGN

Date : 04/05/14

SECTION PARAMETERS: IPE 300

Page : 80

---------------------------------------------------------------------------------------------------------------------------------------CODE: NF EN 1993-1:2005/NA:2007/AC:2009, Eurocode 3: Design of steel structures.


A
NALYSIS TYPE: Member Verification
ANALYSIS
---------------------------------------------------------------------------------------------------------------------------------------CODE GROUP:
Oman_54
POINT: 1 COORDINATE: x = 0.50 L = 2.750 m
MEMBER: 54 Main Beam Oman
_54
---------------------------------------------------------------------------------------------------------------------------------------LOADS:
g Load Case: 4 ULS/1=1*1.35 + 2*1.35 + 3*1.50 ((1+2)*1.35+3*1.50
)
Governing
---------------------------------------------------------------------------------------------------------------------------------------MATERIAL:
ACIER E36
fyy = 35.50 daN/mm2
----------------------------------------------------------------------------------------------------------------------------------------

Section OK !!!

Lamy = 48.99
kyy = 1.00
Lamz = 90.97
kyz = 0.82
---------------------------------------------------------------------------------------------------------------------------------------VERIFICATION FORMULAS:
Section strength check:
N,Ed/Nc,Rd = 0.00 < 0.90 (6.2.4.(1))
(My,Ed/MN,y,Rd)^ 2.00 + (Mz,Ed/MN,z,Rd)^1.00 = 0.03 < 0.90 (6.2.9.1.(6))
Vy,Ed/Vy,T,Rd = 0.00 < 0.90 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.04 < 0.90 (6.2.6-7)
Tau,ty,Ed/(fy/(sqrt(3)*gM0)) = 0.00 < 0.90 (6.2.6)
Tau,tz,Ed/(fy/(sqrt(3)*gM0)) = 0.00 < 0.90 (6.2.6)
Global stability check of member:
Lambda,y = 48.99 < Lambda,max = 210.00
Lambda,z = 90.97 < Lambda,max = 210.00 STABLE
My,Ed,max/Mb,Rd = 0.25 < 0.90 (6.3.2.1.(1))
N,Ed/(Xy*N,Rk/gM1) + kyy*My,Ed,max/(XLT*My,Rk/gM1) + kyz*Mz,Ed,max/(Mz,Rk/gM1) = 0.25 < 0.90 (6.3.3.(4))
N,Ed/(Xz*N,Rk/gM1) + kzy*My,Ed,max/(XLT*My,Rk/gM1) + kzz*Mz,Ed,max/(Mz,Rk/gM1) = 0.13 < 0.90 (6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------

Autodesk Robot Structural Analysis Professional 2015


Author:
Address:

File: Structure Addendum.rtd


Project: Structure Addendum

Date : 04/05/14

Page : 81

About y axis:
About z axis:
Ly = 5.500 m
Lam_y = 0.58
Lz = 5.500 m
Lam_z = 1.07
Lcr,y = 5.500 m
Xy = 0.90
Lcr,z = 2.750 m
Xz = 0.55
Lamy = 44.14
kyy = 1.01
Lamz = 82.10
kyz = 1.56
---------------------------------------------------------------------------------------------------------------------------------------VERIFICATION FORMULAS:
Section strength check:
N,Ed/Nc,Rd = 0.01 < 0.90 (6.2.4.(1))
(My,Ed/MN,y,Rd)^ 2.00 + (Mz,Ed/MN,z,Rd)^1.00 = 0.58 < 0.90 (6.2.9.1.(6))
Vy,Ed/Vy,T,Rd = 0.00 < 0.90 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.19 < 0.90 (6.2.6-7)
Tau,ty,Ed/(fy/(sqrt(3)*gM0)) = 0.00 < 0.90 (6.2.6)
Tau,tz,Ed/(fy/(sqrt(3)*gM0)) = 0.00 < 0.90 (6.2.6)
Global stability check of member:
Lambda,y = 44.14 < Lambda,max = 210.00
Lambda,z = 82.10 < Lambda,max = 210.00 STABLE
My,Ed,max/Mb,Rd = 1.09 > 0.90 (6.3.2.1.(1))

LATERAL BUCKLING PARAMETERS:


z = 1.00
Mcr = 24733.75 daN*m
Curve,LT - a
XLT = 0.70
Lcr,upp=2.750 m
Lam_LT = 0.95
fi,LT = 1.03
---------------------------------------------------------------------------------------------------------------------------------------BUCKLING PARAMETERS:

h=30.0 cm
gM0=1.00
gM1=1.00
b=15.0 cm
Ay=36.16 cm2
Az=25.68 cm2
Ax=53.81 cm2
tw=0.7 cm
Iy=8356.11 cm4
Iz=603.78 cm4
Ix=19.47 cm4
tf=1.1 cm
Wply=628.40 cm3
Wplz=125.22 cm3
---------------------------------------------------------------------------------------------------------------------------------------INTERNAL FORCES AND CAPACITIES:
N,Ed = 1062.34 daN
My,Ed = 16975.86 daN*m Mz,Ed = 13.26 daN*m
Vy,Ed = 9.95 daN
Nc,Rd = 191032.60 daN My,Ed,max = 16975.86 daN*m
Mz,Ed,max = -14.11 daN*m
Nb,Rd = 105189.27 daN My,c,Rd = 22308.16 daN*m
Mz,c,Rd = 4445.38 daN*m
MN,y,Rd = 22308.16 daN*m
MN,z,Rd = 4445.38 daN*m
Mb,Rd = 15626.59 daN*m
Tt,Ed = 1.18 daN*m
Class of section = 1
----------------------------------------------------------------------------------------------------------------------------------------

Autodesk Robot Structural Analysis Professional 2015


Author:
Address:

Vy,T,Rd = 74022.25 daN


Vz,Ed = -10065.14 daN
Vz,T,Rd = 52592.79 daN

File: Structure Addendum.rtd


Project: Structure Addendum

Date : 04/05/14

Incorrect section !!!

Page : 82

N,Ed/(Xy*N,Rk/gM1) + kyy*My,Ed,max/(XLT*My,Rk/gM1) + kyz*Mz,Ed,max/(Mz,Rk/gM1) = 1.10 > 0.90 (6.3.3.(4))


N,Ed/(Xz*N,Rk/gM1) + kzy*My,Ed,max/(XLT*My,Rk/gM1) + kzz*Mz,Ed,max/(Mz,Rk/gM1) = 0.58 < 0.90 (6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------

Autodesk Robot Structural Analysis Professional 2015


Author:
Address:

You might also like