Scribd
Upload
337 views

PPAP Sumbission Level - Top Sheet

This document outlines the requirements and documents needed for a sample approval pilot batch, including a design record of the product, engineering change documents, process documents, test and study results, control plans, samples, and packing standards. Fifteen required documents and samples are listed, with the supplier needing to retain the master sample and make it available upon request to complete the level of PPAP documents submission.

Uploaded by

balagangadhar17
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
337 views

PPAP Sumbission Level - Top Sheet

This document outlines the requirements and documents needed for a sample approval pilot batch, including a design record of the product, engineering change documents, process documents, test and study results, control plans, samples, and packing standards. Fifteen required documents and samples are listed, with the supplier needing to retain the master sample and make it available upon request to complete the level of PPAP documents submission.

Uploaded by

balagangadhar17
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

SN Requirement Sample Approval Pilot batch

1 Design record of the product (Ballooned drawing)


2 Engineering change documents if any
3 AQP Check list and documents
4 Process Flow diagram
5 Process FMEA
6
Dimensional, Material, Performance Test results
Results

7 Initial Process Study (Pp & Ppk)
8 Measurement System Analysis studies
9 Control Plan & Process sheets
10 Part Submission Warrant (PSW)
11 Appearance Approval Report (AAR), if applicable
12 Redelivery Inspection standard (Final Inspection Plan)
13 Samples (min 5 nos)
14 Master Sample (*)
15 Packing standard proposal and agreement
(*) - Supplier shall retain at appropriate locations and make readily available to the customer
representative upon request
PPAP Documents Submission level

You might also like