Scribd
Upload
166 views1 page

Sagus 60

This document provides product data and information about AGIP SAGUS 60, a dark grey graphite grease. It has a NLGI consistency of 0/00 and a base oil viscosity of 500 mm2/s. AGIP SAGUS 60 is suitable for lubricating exposed machine parts operating at high temperatures, as well as gears, power screws, racks, rollers, chains, and wire ropes. It is commonly used in cement works, cable transport facilities, and chemical plants.

Uploaded by

LL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
166 views1 page

Sagus 60

This document provides product data and information about AGIP SAGUS 60, a dark grey graphite grease. It has a NLGI consistency of 0/00 and a base oil viscosity of 500 mm2/s. AGIP SAGUS 60 is suitable for lubricating exposed machine parts operating at high temperatures, as well as gears, power screws, racks, rollers, chains, and wire ropes. It is commonly used in cement works, cable transport facilities, and chemical plants.

Uploaded by

LL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AGIP SAGUS 60

Eni S.p.A.
Divisione Refining & Marketing

Via Laurentina 449, 00142 Roma
Tel. centralino +39 06 5988.1
www.eni.it
[IN816.09.03]

Page 1 of 1

P
R
O
D
U
C
T

D
A
T
A

S
H
E
E
T


AGIP SAGUS 60 is a dark-grey graphite grease.



CHARACTERISTICS (TYPICAL FIGURES)

AGIP SAGUS 60
NLGI consistency 0/00
Base oil viscosity at 40C mm/s 500
Worked penetration dmm 400
ASTM dropping point C 110



PROPERTIES AND PERFORMANCE

The structure and particle size of the graphite used in AGIP SAGUS 60 ensures perfect lubricating
action under the most severe operating conditions.
The solid film of graphite formed between the lubricated surfaces guarantees correct operation of the
moving parts even when mechanical loads and thermal stresses may impair the function of the
lubricating grease.
It adheres tenaciously to metal surfaces.
It can be dispensed by brush or by spray in centralized lubrication systems.



APPLICATIONS

AGIP SAGUS 60 is suitable for use on exposed machine parts, even those operating at high temperature
and especially for the lubrication of gears, power screws, racks, rollers, chains, wire ropes etc.
It finds application principally in cement works, cable transport facilities, chemical plants etc..


SPECIFICATIONS

AGIP SAGUS 60 meets the requirements of the following classifications:

- ISO-L-CKG
- DIN 51826 GF 00 G-10

AGIP SAGUS 60 is approved by Danieli according to Standard 0.000.001 specification

You might also like