Scribd
Upload
42 views

Question Paper Code:: Reg. No.

This document appears to be an exam question paper for an Electronics and Communication Engineering course. It contains 15 multiple choice and numerical problems covering topics in optical communication and networking such as: 1. Calculating the energy of a photon from its wavelength. 2. Finding the critical incident angle for total internal reflection in an optical fiber. 3. Questions related to optical fiber properties, types, splicing, transmitters and receivers. 4. Calculating pulse spreading due to material dispersion and spectral width. 5. Explaining concepts like numerical aperture, refractive index profiles, and measurement techniques for fiber parameters. 6. Discussing network architectures like SONET and transmission impairments like nonlinear effects

Uploaded by

EkambaramMuniyandi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
42 views

Question Paper Code:: Reg. No.

This document appears to be an exam question paper for an Electronics and Communication Engineering course. It contains 15 multiple choice and numerical problems covering topics in optical communication and networking such as: 1. Calculating the energy of a photon from its wavelength. 2. Finding the critical incident angle for total internal reflection in an optical fiber. 3. Questions related to optical fiber properties, types, splicing, transmitters and receivers. 4. Calculating pulse spreading due to material dispersion and spectral width. 5. Explaining concepts like numerical aperture, refractive index profiles, and measurement techniques for fiber parameters. 6. Discussing network architectures like SONET and transmission impairments like nonlinear effects

Uploaded by

EkambaramMuniyandi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

www.comeletslearn.

com
Reg. No. :

Question Paper Code :

55349

B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2011.


Seventh Semester
Electronics and Communication Engineering
EC 2402 OPTICAL COMMUNICATION AND NETWORKING
(Regulation 2008)
Time : Three hours

Maximum : 100 marks


Missing data could be suitably assumed.
Answer ALL questions.
PART A (10 2 = 20 marks)

1.

What is the energy of a single photon of the light whose = 1550 nm, in
eV?

2.

Assume that there is a glass rod of refractive index 1.5, surrounded by air.
Find the critical incident angle.

3.

Define the attenuation coefficient of a fiber.

4.

Calculate the cut-off wavelength of an optical signal through a fiber with


its lcore lrefractive lindex lof l1.50 land lthat lof lcladding l= l1.46. lThe lcore
radius of 25 m. The normalised frequency is 2.405.

5.

Why silicon is not used to fabricate LED or Laser diode?

6.

Calculate lthe lexternal ldifferential lquantum lefficiency lof la laser ldiode


operating at 1.33 m. The slope of the straight line portion of the curve
for lthe lemitted loptical lpower lP lversus ldrive lcurrent lI lis lgiven lby l15
mW/mA.

7.

Define quantum efficiency of a photo detector and write the expression.

8.

Mention the error sources in fiber optic receiver.

www.comeletslearn.com

www.comeletslearn.com
9.

What are the three common topologies used for fiber optical network? Give
the schematic of any one network?

10. Calculate the number of independent signals that can be sent on a single
fiber in the 1525-1565 nm band. Take the spectral spacing as per ITU-T
recommendation G.692.
PART B (5 16 = 80 marks)
11. (a)

(i)
(ii)

What lis lnumerical laperture lof lan loptical lfiber? lDeduce lan
expression for the same.

(12)

Calculate NA of silica fiber with its core refractive index (nl) 1of
1.48 and cladding refractive index of 1.46. What should be the
new value of nl
1 in order to change the NA to 0.23.
(4)
Or

(b)

12. (a)

(i)

Explain lthe lphenomenon lof ltotal linternal lreflection lusing


Snell's law with figures and calculations.
(12)

(ii)

Distinguish step-index from graded index fibers.

(i)

What do you mean by pulse broadening? Explain its effect on


information carrying capacity of a fiber.
(12)

(ii)

An LED operating at 850 nm has a spectral width of 45 nm.


What lis lthe lpulse lspreading lin lns/km ldue lto lmaterial
dispersion? lWhat lis lthe lpulse lspreading lwhen la laser ldiode
having a 2 nm spectral width is used? The material dispersion
is 90 ps/nm km.
(4)

(4)

Or
(b)

13. (a)

(i)

What lis lmeant lby lfiber lsplicing? lExplain lfusion lsplicing lof
optical fibers.
(8)

(ii)

Explain expanded beam fiber connector with a neat schematic.(8)

(i)

Compare LED with a laser diode.

(ii)

With the help of a neat diagram explain the construction and


working of a surface emitting LED.
(12)

(4)

Or
(b)

(i)

Explain the structure and working of a silicon APD.

(ii)

Define S/N ratio of a photodetector. What conditions should be


met to achieve a high SNR? l

www.comeletslearn.com

(12)

55349

(4)

www.comeletslearn.com
14. (a)

(i)
(ii)

Explain the fiber optic receiver operation using a simple model


and its equivalent circuit.
Explain the operation of a pre-amplifier built using a FET.

(8)

(8)

Or
(b)

15. (a)

Explain the measurement technique used in the case of


(i)

Numerical aperture

(ii)

Refractive index profile

(iii)

Fiber cut-off wave length

(iv)

Fiber diameter.

(16)

Explain the architecture of SONET and discuss nonlinear effects on


Network performance.
(16)
Or

(b)

Write short notes on


(i)

Wavelength routed networks.

(ii)

Optical CDMA.

(8)
(8)

www.comeletslearn.com

55349

You might also like