Scribd
Upload
46 views

Klinger TSM-AS: TA-Luft Approved Exfoliated Graphite With Tanged Insert Applications

This document provides information on the Klinger TSM-AS exfoliated graphite gasket material. It has TA-Luft approval, making it suitable for applications requiring this standard. It can be used for sealing in steam, hot water, thermal oils and hydrocarbons. The material has excellent resistance to steam and hot water and is resistant to virtually all media. It also has good compressibility, leakage properties and unlimited storage life. Typical specifications include a gray color, compressibility between 30-45%, and recovery between 15-25%. It is available in sheet and cut gasket forms in various standard sizes and thicknesses.

Uploaded by

dedikartiwa_dk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views

Klinger TSM-AS: TA-Luft Approved Exfoliated Graphite With Tanged Insert Applications

This document provides information on the Klinger TSM-AS exfoliated graphite gasket material. It has TA-Luft approval, making it suitable for applications requiring this standard. It can be used for sealing in steam, hot water, thermal oils and hydrocarbons. The material has excellent resistance to steam and hot water and is resistant to virtually all media. It also has good compressibility, leakage properties and unlimited storage life. Typical specifications include a gray color, compressibility between 30-45%, and recovery between 15-25%. It is available in sheet and cut gasket forms in various standard sizes and thicknesses.

Uploaded by

dedikartiwa_dk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Telephone : 01274 - 688222

Fax : 01274 - 688549


E-mail : [email protected]
142
S
h
e
e
t

M
a
t
e
r
i
a
l
Klinger TSM-AS
TA-Luft approved exfoliated graphite with tanged
insert
Applications:
For applications requiring a material with TA-Luft approval.
Used for a wide range of industrial sealing applications including
steam, hot water, thermal oils and hydrocarbons
Premium quality material for many industrial sealing applications.
Excellent resistance to hot water and steam.
Properties:
Excellent gas-tightness even at low gasket stresses.
Excellent resistance to steam
Resistant to virtually all media
Outstanding resistance to high and low temperature
Maximum temp. 460C (in oxidising atmospheres) 3000C (in non-
oxidising atmospheres)
High compressibility
Good leakage properties
Unlimited storage life
Available in sheet form and as cut gaskets
TA-Luft approval
Anti-stick fnish on both sides
Typical Specifcations:
Colour : Grey
Compressibility (ASTM F36J) : 30-45%
Recovery (ASTM F36J) : 15-25%
Stress relaxation
DIN 52913: 50MPa, 16h/300C : >45 N/mm
Leachable chloride : >40ppm
Graphite purity : >98%
Insert : 316, 0.1mm
Density : 1.0g/cm
(Based on 1.5mm thick sample)
Tests and Certifcations:
TA-Luft (Clean Air) certifcate acc. VDI 2440
Other tests in preparation
Availability:
Sheeting (m): 1.0 x 1.0*, 1.5 x 1.5
(* Denotes standard sheet size)
Thickness (mm): 0.8, 1.0, 1.5, 2.0, 3.0
Also available with re-inforcements:
KLINGER PSM-AS, tanged stainless steel insert (shown on page
143)
KLINGER SLS, stainless steel foil (shown on page 144)
KLINGER SLN, with Nickel foil insert
KLINGER SML, with polyester insert
Pressure/Temperature Graph:
Area 1: Usually satisfactory to usemarkence.
Area 2: Usually satisfactory, but suggest you refer
to Klinger for advice.
Area 3: Caution: May be suitable but essential that
you refer to Klinger for advice.
200
150
100
50
0
0 -100 200 100 300 -200 400 500
P
r
e
s
s
u
r
e

(
b
a
r
)
Temperature (C)
1
3 2

You might also like