NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.

0227
TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.336.4226 INTERNATIONAL OFFICE PH: +1.574.295.3327 FAX: +1.574.295.3455
www.nibco.com
A H E A D O F T H E F L O W

www.nibco.com
31
DIMENSIONSWEIGHTSQUANTITIES
Dimensions
Size A-1 A-2 B C-1 C-2 D-1 D-2 E F
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm.
3 80 4.0 101.5 4.0 101.5 12.6 321 0.75 19.0 0.94 24 7.5 191 7.7 195.3 4.9 126 3.1 80
4 100 4.5 114.5 5.0 127.0 13.5 344 0.94 24.0 1.00 26 9.0 229 9.1 232.0 6.0 153 3.9 100
6 150 5.3 133.5 5.7 146.0 17.4 441 1.00 25.4 1.06 27 11.0 279 11.1 282.5 8.1 206 5.9 150
8 200 5.7 146.0 5.7 146.0 20.8 529 1.13 28.6 1.12 28 13.5 343 13.4 339.6 10.3 261 7.9 200
10 250 6.5 165.0 6.5 165.0 24.2 614 1.19 30.2 1.18 30 16.0 406 15.6 396.8 12.3 313 9.8 250
12 300 7.0 178.0 7.0 178.9 27.6 700 1.25 31.8 1.25 32 19.0 483 17.9 454.2 14.4 367 11.8 300
MATERIAL LIST
PART SPECIFICATION
1. Valve Body Ductile Iron ASTM A 536
2. Resilient Wedge Ductile Iron ASTM A 536/EPDM ASTM D 2000
3. Wedge Nut Bronze ASTM B 584 UNS C83600
4" - 12" ASTM B584 UNS C92200 3"
4. Stem Bronze ASTM B 150 UNS C61400
5. Bonnet Gasket EPDM ASTM D 2000
6. Bonnet Screw 18-8 Stainless Steel ASTM 193
7. Bonnet Ductile Iron ASTM A 536
8. Stem Primary O-Ring EPDM ASTM D 2000
9. Stem Thrust Washer (lower) Bronze ASTM B 584 UNS C83600
10. Stem Thrust Washer (upper) Stainless Steel ASTM A 276 UNS S41000
11. Gland Seal O-Ring EPDM ASTM D 2000
12 Stem Seal Bushing Bronze ASTM B 584 UNS C83600
13. Stem Secondary O-Ring (2) EPDM ASTM D 2000
14. Gland Flange Ductile Iron ASTM A 536
15. Gland Flange Screw Alloy Steel ASTM A 574M Zinc Plated
16. Stem Ring Wiper EPDM ASTM D 2000
17. Square Operating Nut Cast Iron ASTM A 126 B
17A. Handwheel (optional) Ductile Iron ASTM A 536
18. Flat Washer Carbon Steel Zinc Plated
19. Screw Alloy Steel ASTM A 574M Zinc Plated

Coating Electrostatically applied fusion-bonded epoxy 10-14 mil. inside and outside.
Meets or exceeds AWWA C 550
Coating is NSF and FDA certified
Maximum operating temperature 160F/71C.
250 PSI CWP Iron Body Gate Valve
Bolted Bonnet Non-Rising Stem Resilient Wedge Flanged by MJ Ends
250 PSI/17.2 Bar Non-Shock Cold Working Pressure
FM-619-RW
FM-619-RW-SON
Dimensions
Size G H I Flanged B.C. MJ B.C. No. holes No. holes Turns Weight
In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Flanged M-Joint to Open Lbs. Kg.
3 80 2.1 54 10.2 260 1.73 44 6.00 152 6.19 157 4 4 10.8 43 20
4 100 2.1 54 10.2 260 2.13 54 7.50 191 7.50 191 8 4 13.0 70 36
6 150 2.5 64 14.8 375 2.24 57 9.50 241 9.50 241 8 6 15.7 112 51
8 200 2.8 70 14.8 375 2.48 63 11.75 298 11.75 298 8 6 17.3 170 77
10 250 2.8 70 15.7 400 2.56 65 14.25 362 14.00 356 12 8 21.4 267 121
12 300 3.4 86 19.7 500 2.91 74 17.01 432 16.25 413 12 8 25.3 388 176
FREEZING WEATHER PRECAUTIONS: Subsequent to testing a piping system, valves should be left in an open position to allow complete
drainage.
END CONNECTIONS
A-1 Center to face on Flanged end
A-2 Center to face on MJ end
B Center to top of stem
C-1 Flange thickness on Flanged end
C-2 Flange thickness on MJ end
D-1 Flange O.D. on Flanged end
D-2 Flange O.D. on MJ end
E O-ring groove diameter or MJ end
F Waterway diameter
G Boss diameter on Flanged end
H Handwheel diameter

I
Face to center of boss on
Flanged end
5/1/2012
*Lead Free refers to the wetted surface of pipe, fttings and fxtures in potable water systems that have a weighted average lead content 0.25% per the Safe Drinking Water Act (Sec. 1417) amended 1-4-2011 and
other equivalent state regulations.
CONFORMS TO AWWA C509 & C515
CERTIFIED LEAD-FREE* BY IAPMO R&T TO NSF/ANSI 372