SW 5.1 3005 Manual Eng
Uploaded by
rojadiroSW 5.1 3005 Manual Eng
Uploaded by
rojadiroEnglish
INSTALLATION
To prevent malfunction and/or damage to speaker or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.
(A) Connecting the speakers to the Subwoofer
For the fie sets of wires inclu!e!" use the red/black wire to connect to the RED positive terminals
and use the black wire to the B!"# negative terminals on the back of the subwoofer and speakers as
e$plained below.
%. "onnect the FR speaker to the AUDIO OUTPUT - FR+/- spring tags of the subwoofer.
&. "onnect the FL speaker to the AUDIO OUTPUT - FL+/- spring tags of the subwoofer.
'. "onnect the SR speaker to the AUDIO OUTPUT - SR+/- spring tags of the subwoofer.
(. "onnect the SL speaker to the AUDIO OUTPUT SL+/- spring tags of the subwoofer.
). "onnect the "E speaker to the !*D+, ,*T-*T . "E//0 spring tags of the subwoofer.
(#) Connecting the Subwoofer to other Au!io Sources
For the three sets of stereo $CA to %&'(( stereo cables inclu!e!" The (5.1) INPUT 1acks on the
subwoofer are used for connecting a ).%0channel device with front, surround, center, and subwoofer
outputs.
After you finish A and B above, you can turn on the Power Switch on the back of subwoofer.
(C) Controller function
%. )olu(e2 !d1ust 3aster volume
&. #ass2 !d1ust Bass volume
'. *ower light2 ight when power on
%
