Henderson Process Systems Limited Welder Performance Qualification Certificate Welder Identification Code / Standard: PS7 SUSt Welders Wi [S. Wilson TR COV 007853080 35 [Identity Ni [wase HPSL Sunderland Test Date: 30/07/2008 Certificate Expiry Date: _| In Accordance with ASME IX | Material Specification(s) [Parent Material 1: | ASTMA312 TP 316L Mat Group No: | Group & ] Parent Material | ASTM A312 TP 3T6L Mat Group No: | Group 8 7 Mat Groups Covered: | 1-17, 34, 41-49 F Typet Gromatig 376L Filler Material Spec(s): | AWS AS 8-03 ER S16L. BS 2001-00 316 992 F No.6 ANo 6 Shield Gasses: | Argon 90.95% [Purge Gasses: ‘Argon 99.95% - imal : Weld Test Details Test Details | Approval Range] Welding Process: GTAW — Manual (GTAW Manual | | PlatelPipe Pipe Pipe or Plate \ |. [Backing Without With or without l c a cea | Joint Type: Single -V" Al | LL, Mat Thickness (mm): 54mm Upto 11.08mm Pipe OD (mm): [___60.33mm 25.40mm — Upwards Welding Position: 6G Fixed ‘AI {Not Vercal Down) TRE | cea | Current Type / Polarity: Dc sve meee DC-ve C_| Welding-one/both sides: | One ‘One & Both o-2mm | Consumable Insert None Inspection Re Satisfactory - Satisfactory [ _ Liquid Penetrant: | N/A | jarks / Comments Acceptance & Approval accordance with the specified codes or standards. We certify that the above statements are correct and that the test pieces were prepared, welded and tested in pe Henderson Process Systems Limited Inspection Authority: Lloyds Register EMEA Name: J. Mills Name: Tim Bellamy a _ Signature / Stamp: Signature / Stamp: Date:30/07/09 QA 051 Rev AHenderson Process Systems Limited Welder Performance Qualification Certificate Code / Standard BS.EN 287 Pt 1: 2004 WPAR Ref: PS 7 | Parent Metal St/St__| Designation: EN 287-1, 141, T, BW, 8, S, 5.54, 460.33, H-L045, ss, nb Welder Identification Welders Name: S. Wilson LR COV 0918533138 34. Identity No: Was HPSL Sunderiand Test Date: ‘30/07/2009 — Certificate Expiry Date: 30/07/2071 Material Specification(s) ASTM A312 TP316L “ASTM A312 TP3T6L Cromatig 316L AWS A5.9-93 ERS16L Parent Material 1: Parent Material 2: Filler Type(s): Filler Material Spec(s): Group 8 Group Material Group No. Material Group No. Shield Gasses ‘Argon 99.5% Purge Gasses: ‘Argon 99.9% Welding Current: DC-ve Weld Test Details Test Details ‘Approval Range B Welding Process: THG(Ia1) na (ay Plate/Pipe: Pipe Pipe and Plate C\ / ont Typ But Bu and Filet Ic Mat Thickness (mm): 5.54 3.00 - 11.08 = [ Pipe OD (mm): 60.33 30.16 — Upwards =) Consumable s s eee H-L045 All Except J-LO45 & PG 2 TES | arama | Material Group: a 8,92, 93,10 A B | Gouging/Backing: Serb ‘S5nb, ss m,n, 99 FW: sl, ml THM | TR | OTH | Other: NK NA Non-Destructive Tests Inspection Results Visual: Satisfactory Radiographic: _Satisfactory Liquid Penetrant: “N/A Acceptance & Approval Magnetic Particle: N/A Ultrasonic: WA Bend Tests: NWA We certify that the above statements are correct and that the test pieces were prepared, welded and tested in accordance with the specified codes or standards. Henderson Process Systems Lined T Inspection Authority: Lloyds Register EMEA Name: J. Mills FSS Name: Tim Bellamy ‘Signature / Stamp: ‘Signature / Stamp: = Date: 30/07/2000 QAOS1 Rev A,Welder Performance Qualification Certificate Henderson Process Systems Limited | Code / Standard: BS.EN 287 Pt 1: 2004 WPGR Refi P52 Parent Metal: Lr GST Designation: Welder identification EN 287-1, 141, T, BW, 11.1, S, 16.54, 60.33, H-LO45, ss, nb Welders Name: | 5. Wilson Certificate No:_| LR COV 0918533132 Identity No: [wase Test Location: | HPSL Sunderland | Test Date: [30/07/2008 Certificate Expiry Date: | 30/07/2077 Material Specification(s| Parent Material 1 LT Carbon Steel ASTM A333 Gr 6 Parent Material 2: LT Carbon Steel ASTM A333 Gr 6 Filler Type(s): Filarc PZ6500 Filler Material Speo(s): | AWS A5.18 ER70S-6_F No.6 ANo: 1 Shield Gasse ‘Argon 99.95% | Purge Gases: [None = | Weld Test Details [__ Test Details yroval Range B Welding Process: | _TIG(‘4t) - Manval TIG (141) - Manvel | Plate/Pipe: Pipe Pie or Plate ~ Backing: “Without With or Without f ic Joint Type: Single All i Mat Thickness (mm): 5.54 3.00 — 17.08 a Pipe OD (mm): 60.33 30.16 - Upwards ‘Consumable s s een cioeren H-Loas All Except J-L045 & PG | "RE | can _| Material Group: ita Tatars B | Gouging/Backing: ‘Se nb ‘Senb, ssmb, bs FW, mi TENT | Woe | TETEOS | Other NK NA Non-Destructive Tests Inspection Results [______ Visual: | Satisfactory Radiographic: [Liguid Penetrant: Acceptance & Approval Magnetic Particle: | N/A Ultrasonic: | WA Other [WAY We certify that the above statements are correct and that the test pieces were prepared, welded and tested in accordance with the specified codes or standards, Henderson Process Systems Limited Inspection Authority: Lloyds Register EMEA ‘Signature / Stamp: 7 “Yy ‘Signature / Stamp. € Date:04/08/09 QA05IRevAWelder Ident Henderson Process Systems Limited Welder Performance Qualification Certificate | Code / Standard: ASME IX WPGR Ref: PS 2 Parent Metal: LT C/S Welders Name: | 5. Wison Cerlificate No: UR COV 0918533773 Identity No: Was6 Test Location: | HPSL Sunderland Test Date: ‘30/07/2009 Certificate Expiry Date: _| In Accordance with ASME Material Specification(s) Parent Mater rial 1: UT Carbon Steel ASTM A333 Gr 6 Mat Group No: |PiGri_ Parent Mater rial 2: UT Carbon Steel ASTM A333 Gr 6_| Mat Group No: PaGri 1-14, 34, 41-49 Filarc PZ6500_F No: 6 ANo:i ‘AWS AS.18 ER 70 S-6 Argon 99.95% Purge Gasses: None Co Weld Test Details Test Details ‘Approval Range Welding Process: GTAW — Manual GTAW - Manual 1 Piate/Pipe Pipe Pipe or Plate f |c [Backing Without With or without Joint Type: Single "V" Al IL, ‘Mat Thickness (mm): | 554mm Upto 11.08mm Pipe OD (mm): 60.33mm 25-40mm - Upwards Welding Position: 6G Fixed ‘Ai_(Not Verical Downy an "EE | auraa_| Current Type / Polarity: DC-ve Do-ve A B ‘C__| Welding-onelboth sid ‘One ne & Both Fam | TDs | 0-2mm | Consumable Insert None None Non-Destructive Tests Inspection Results Visual | Satisfactory Magnetic Partie: [ NA — Radiographic: | Satisfactory [_ Ultrasonic: | N/A _ _ | Liquid Penetrant: | N/A Other: | NIA Remarks / Comments Acceptance & Approval We certify that the above statements are correct and that the test pieces were prepared, welded and tested in accordance with the specified codes or standards. Henderson Process Systems Limited Inspection Authority: LI Toyds Register EMEA Namen Wiis ees Name: Tim Bellamy Signature /StanpbO-5 DEAN ON ~ ‘Signature / Stamp: a San = Date: 04708708 Date: QA OSI RevaHedley (Engineering Services) Lid by West Havelock Street South Shields, Tyne and Wear, NE33 DZ Tel No: 0191 456 0250 WELDER QUALIFICATION CERTIFICATE Cerificate No 4906/6 Welders Name | Stephen Wilson Date of Test 2ov10/2008 Welders iD.No | Nia Test Standards) EN 287-1: 2004 / ASME 1X Welded to WPAR No: | HESo22 Process SSMAW & FCAW (111 & 136) Material Spec | EN10025: $355J2, DNV A36 Material Group W041 Low carbon (CMn) Steels TestnetenaThavess | mm Predia | Pie Tom Type Sac veosurwoe [Rea [ac 0) Back Gousha wore Backing | None _ Consumables Root: Filarc 56S ~ SFA/AWS AS.1 / Fil: NST SF SAM ~ AWS AS-29 E81T1-G - Weldap 20 Range of Approval “Thickness 3mm — 24mm Pipe Diameter 0mm Welding Position | 16,26 (PA, PB, PC) Joint Type All, excluding brach connections Test Results Visual Satisfactory Radiography Satisfactory NDT Results Uttrasonies MPU/DPI Satistactory Mechanical Test [Result Mechanical Test Result Tensile Satistactory Bend Satisfactory Hardness Satisfactory Charpy Satisfactory Mechanical Teste By _| WIS Lid Dale 03711708 “AWL8863 Welding witnessed By | R. Summerson, ONV NDT Report 20/10/08 Hedley (Engineering Services) Ltd] CERTIFYING AUTHORITY Client TAR Lad gD. Name: D. Hutchinson , Endorsed By Approved By: some lle Wf ; 7 fii (AW AN) LO) Date: 28/11/2008 vate 44 J) fod dates 1@\\oS JE -2> 200% Dersremuegesd Yeti = CERTIFICATE ENDORSEMENT HESISTHedley (Engineering Services) Ltd South Shields, By West Havelock Street Tyne and Wear, NE33 5DZ Tel No: 0191 456 0250 WELDER QUALIFICATION CERTIFICATE Centfcate No 490676 Welders Name | Stephen wilson Date of Test 20/0/2008 Welders DWo | NIA | Test Standara) EN 267-1: 2004 ASME Xx Welded to WPQR No: HES022 Process FCAW (136) | WMateral Spec EN70025: $3662, DNV A96 | Material Group | Wt Low carbon (CMn Steels Test Material Thickness. | 9mm Pipe Dia Plate Joint Type Single Veo Butt Weld Waiding 26 (PC) Back Gouging None Backing SMAW Root Consumables NST SF SAM — AWS AS-29 E8171-G - Weldep 20 Range of Approval Thickness arin = 1éry Pipe Diameter _| >= 500mm : Filet and butt with backing or back Waiding Postion | 16,26 ( PA, PB, PC) veineType | Pet and bt with Test Results Visual Sattactony Radiography ___ | Salisactory NOT Resuts Uivasonies [NA MPITOPI Satsfactory Wehanial Tea Result Wieshanical Test Reaul Tensile Saistadion Bend Satstectony Hardness Satitacton Charpy Satisfactory Mechanical Tests By | MISLid Date canbe Welding Witnessed By R. Summerson, DNV. NDT Report ANLEEES 2on0108 Hedley (Engineering Services) Lta Name: D. Hutchinson Sioned Sil CERTIFYING AUTHORITY Endorsed By: f ; A \@ bee AMA ) erties Date: 28/11/2008 ove 1 D/ rloe vate | \2\ 0S J SO} 2004 ‘CERTIFICATE ENDORSEMENT daze wee HESTS?2 eni62 sez #4038 , Page 1 of 2 EONS & Welder Performance Qualification (WPQ) Certificate Todes/ ASME Ik _ a Paes undes natae PRIVATE, [WRG erie ToMi“COVOEBOATGTTL — TC mesma eae Sie | SOUTH: ‘SHIELDS Walder 1 anibor TWE-10- 10-04-04 | Sis frame tint el iia TATOER ene Wa de rer sox” OG-APR2OG win Iie | __| Shop Weld _ = ee — [[Materisis and Welding Deils Mirae pecan type ad group THT Tite i and Regaian [ASTM 4312. Tai6t [AWS ASO ER Stet ) Mate specications pe wT groip TEED Bidding anlparging poe 1 | ASTM A 312. T3168 [Pome arcow shoes. ! Tireoffat Th sowing een ini” Paonia” Tg (Neate ae Daas (pose FoTaw | craw PBrecwnds | somm i Pl a Wi ~ iicor ire | pap | PIPEand PLATE | USEes 6G [wren ow with/without | ess fm) GTAW 6 | Grawa2 Lutse \ | or \ i BOTTTSIORS | f | | Ni | i | | sit [eurrwei (au [ome | Not Applicable | tome ag aa i [Nonedestmctive tess | Deatrattve ies Results | | Satisfaction TI [Not applicabie | | Not applicable ‘Nol applicable | —[Not applicable “| terra ae | Notapplicable T Satisfactory rene ~ Not applicable —[Notapplicab tile cane _T Not applicable ~[Not applicable” [ing se "| Not applicable ~ ia ake lcm coltvurstadhs ASME DK Thal Te pis wee prepa, WTS al Wed in nara sth he sp { i fiddlesbrough —[Sarveyie w Toys Regie EEA [Ea sap ie” ap ae | —— se AT ERG ST en el TS 2 | 57S cry see ene aka Bla el ane Strata Viriing Pandan Spin Rien op ara ears =ae a eee Page 2 of 2 (Qualldcaiion' Codes/Standarde —ASMEDC 1 ‘Manafacturerls name WrOcwilicaienamber —_COVOSI0030/1 | PRIVATE Oiice COVENTRY Date iF ATR Walder name ~ | SWILSON | Tus coniticate remains valid fora period of two years only ifthe welder named on sheet 1 has been employed on the Class or Type of Welding, with satisfactory results, caring the periods ‘ofsix months since initial approvel or last endorsement ‘Welderls photograph (it roquired) Prolongation of validity shall be subjact tothe surveyorls satisfaction with respect tothe alderls documented record and any specific Code requirements Trdorscment © | Signatareand poaion of employes: | — Sigianarcofmaveyar” | Job nawialge Dice ampand ate) monty) representative verifying veriyingaccepable | scceptanco/st | ployment na welding welding performance feted i performance i 2 Carta Wh OA Hanae I 2 A Manced Zi oot to S| eso 1S (wat and Kv Qe five io Cf wg SINC & Pee ace | is 0 EM at Que 2 [Ga A eee 2 Fost 2oeg [CS 4X 12-01 = 2008 | MLZ | Dik EL 2 { bo -e7 cee! | ih here se oD Bex =| dpactore | 4] 4 [reo SF |whmsiter? Prolongation of validity (biennial) Signature/Stamp Form 5208 2005.06) THIS DOCUMENT IS SUBJECT TO THE PROVISIONS ON THF REVERSElo Is Page 1 of 2 en @p Welder Performance Qualification (WPQ) Certificate ( Gualfcton: Codes Standards ASMETX — ee | Manfacurers name PRIVATE WPQcertificatenumber — COV0430036/04 | ‘ass [otce 53, Waverdale Way Date | Westway Park | Welisrrwms | Stephen Wilson | South Shields Welder ID number | TWI-04-02-2004 NE33 4S} Waldtesiranber | SW-015A | “Welderis Date of Birth / National LD Number 13-11-1955, YX-95-35-85- Wis manor TWIOISA Tevionmamber 0 Wishes Fi | [ea carmes TR oecenpaa| SECC LE | (eceshoct2 ofthis entities for condition) Shop Weld Bate of aFeb 2008 [Materials and Welding Details ~ 7] | Maal pein ps ne romp (SET Tiller ype and designation APISL-ASTM A 10B SMAW : AWS A5.7016S -FCAW : AWS5.20 E71 7-1 Materials specication, type and groap 1Side2 Shielding and purging gases APISL-ASTM A 10B | Ar 93% + Co2 5% + Oxygen 2% Type oft (kh showing dimensions) NO 7? Lim } | Deron a Nem be lee j ‘Variables | Wald Text Details | Range of Approval | Varian ‘Weld Tex Details | Range of Approval —] pose SMAW-FCAW | SMAW-FCAW | Heals || 219 73.and above (eye |PIPE(FIXED) | PIPE and PLATE | Mone 6G ALL POSITIONS | Gouging SMAW=With/ Test piece SMAW 10 SMAW 20 | fexcking [ WEH ouT: Without-see other twiekness (om) | FCAW 11 FCAW22 [Wade Toni | Toefl sides) | ONE SIDE BOTH SIDES BUTISE BACK GOUGING Wi Joieetype | BUTT WELD ed | Other BACKING | FCAW-With | "Tet Results (tate salisfaciory, unsatisfactory of not applicabie) = = —— Non-destructivetests | Destructive tests [Noo — Results Visual Satisfactory aco examination ‘Not applicable ‘Magnetic particle Not applicable | Root Bend ‘Not applicable Tiguid penetrant ‘Not applicable Tacebend Not applicable “Radiographic ‘| Satisfactory | Sidebend _ Not applicable “Titasonie Not applicable weld acters [ Not applicable Other ‘Not applicable Other Not applicable | ‘We certify thatthe above Hatements are correct and that the test pieces were prepared welded and thespssitied codes orstandards. ASME IX I ‘Organization TWH North Barveyor to Hoya Rag | Bate 16-Feb-2004 Date } 8 H ‘Oily te nal oh ane wanes apie me aI pe OT NA ID & Aus erteae remains val nly whi the welder remains in the cmploy ofthe manalasuret above, i lature Welding Procedure Speciation Form 5208 (2005.06 ‘THIS DOCUMENT IS SUBJECT TO THE PROVICInNe ON Tur BEVEDcEPage 2 of 2 ‘Qualification Codes/Standarde ASMETC ‘Manfacturers name WPQ cartfcatenambsr ~~ COWOSS0036704 PRIVATE fee (COVENTRY Date 16-FSb2007 ‘Walder name Stephen Wilson “This cotificate remains valid fora period of two years only ifthe welder named on sheet has ‘been employed on the Class or Type of Welding with satisfactory result, during the periods of ix onthe sine initial approval ort endorsement Welders photograph (Gfresuires) Protongation of valiity stl be subject tothe surveyors saisiaton with espeet othe ‘weldels documented record and any speiie Code requirements Tndorsement (6 | Sigature and postion of employer | Siguatarcofsurveyor | Job Fnowiedge ‘Dies wap and date ‘monthy) representative verifying verifyingacceptable | aeceptance/not employment and welding welding petormance tested performance } las® oct Bow | SoD Tak ences nit AR aoos | SCOdD TOA face IGA eter. Wasnt Prolongation of validity (biennial) Signature /Stamp Zw Son meted . Dri: 3 Ve CA 33 wh ee Sonn ‘oiee: This certificates subject wo the tars and conditions over which form part of this certificate Form 208 (205.06) “Tle DOCLIMIENT 1¢ CIIRIECT TR THE DErajeimae mas tur neseemep