Scribd
Upload
28 views

Assignment I Chee 4103 Computer Aided Design B. Tech. Chemical Engineering Submission Date: 17/05/2014

This document discusses characteristics used to classify reactor designs, including mode of operation (batch or continuous), phases present (homogeneous or heterogeneous), and reactor geometry (stirred tank, tubular, packed/fixed/moving bed, fluidized bed). It also assigns drawing the flow diagram for sulphuric acid manufacture and describing the process.

Uploaded by

Jayakaran Pachiyappan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
28 views

Assignment I Chee 4103 Computer Aided Design B. Tech. Chemical Engineering Submission Date: 17/05/2014

This document discusses characteristics used to classify reactor designs, including mode of operation (batch or continuous), phases present (homogeneous or heterogeneous), and reactor geometry (stirred tank, tubular, packed/fixed/moving bed, fluidized bed). It also assigns drawing the flow diagram for sulphuric acid manufacture and describing the process.

Uploaded by

Jayakaran Pachiyappan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Assignment I

CHEE 4103 COMPUTER AIDED DESIGN


B. Tech. Chemical Engineering
Submission date: 17/05/2014

I. The following characteristics are normally used to classify reactor designs:
1. Mode of operation: batch or continuous processing
2. Phases present: homogeneous or heterogeneous.
3. Reactor geometry: flow pattern and manner of contacting the phases
(i) Stirred tank reactor;
(ii) Tubular reactor;
(iii) Packed bed, fixed bed and moving bed reactors;
(iv) Fluidised bed reactor.
II. Draw the neat flow diagram of sulphuric acid manufacture and describe the process

You might also like