Scribd
Upload
9K views

RC Beam Design (Cantilever)

This document provides the design details for a cantilever beam that is 1.5 meters in span. It includes the design data, load calculations, moment calculations, trial reinforcement details, and checks to ensure the design is safe. The trial reinforcement uses 2 bars of 12mm diameter rebar for tension and 2 bars of 12mm diameter for compression. Calculations show the concrete and steel moment capacities are greater than the design moment, indicating the design is safe.

Uploaded by

api-19753598
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
9K views

RC Beam Design (Cantilever)

This document provides the design details for a cantilever beam that is 1.5 meters in span. It includes the design data, load calculations, moment calculations, trial reinforcement details, and checks to ensure the design is safe. The trial reinforcement uses 2 bars of 12mm diameter rebar for tension and 2 bars of 12mm diameter for compression. Calculations show the concrete and steel moment capacities are greater than the design moment, indicating the design is safe.

Uploaded by

api-19753598
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 7

Proj. Name: 2 - Storey Resd'l.

General Description:
Location: Lolita Village, Brgy. Caibaan, Tac. City Cantililever Beam 1.5 m span
Client: Pitao BL
Designer: Pitao BL
Date: 2/7/2008

DOUBLE REINFORCED CANTILEVER BEAM (WSD)


AT END - SPAN NEGATIVE MOMENT
DESIGN DATA FOR CONCRETE BEAMS:
13.79 17.2 20.7 mpa
ITEM fc' = 2,000.00 2,500.00 3,000.00 psi
fc = .45fc' 6.21 7.74 9.32
Es 200,000.00 200,000.00 200,000.00 mpa
Ec = 4730√fc' 17,564.80 19,616.67 21,520.20 mpa
n = Es/Ec 11.00 10.00 9.00
k = n/(n+fs/fc) 0.2481 0.2723 0.2884
j = 1 - k/3 0.92 0.91 0.90
Given: fc': 3,000.00 psi Span L: 1.5 meters
fc = 1,350.00 psi Beam Section:
9.308 mpa b 150 mm
fs = 30,000.00 psi d 250 mm
206.85 mpa Slab Thickness: 0.1 meters
Concrete Covering: Top = 35 Slab Width : 3 meters
Bottom = 25 Wall Ht. : 1 meters
Wall Thk.: 0.13 meters
DEADLOAD:
BEAM : 0.883 Kn / m
1/2L SLAB : 3.546 Kn / m
WALL : 1.530 Kn / m
SIESMIC: 0.877 Kn / m
LIVELOAD: 1.94 5.82 Kn / m
TOTAL LOAD: W = 12.657 Kn / m

DESIGN MOMENT: Md = WL^2/2 14.239 Kn - m

COMPUTING FOR M1 = fckjbd^2/2 9.21 Kn - m

As1 = M1/fsjd 219.01 sq.mm.

IF: M1 < Md: THEREFORE : PROVIDE COMPRESION BARS

COMPUTING FOR M2 = Md - M1 5.03 Kn - m

As2 = M2/fs(d-d') 113.01 sq.mm.


TOTAL As = As1 + As2 332.02 sq.mm.

COMPUTE OF As':
WHERE: fs' = 2fs(kd-d')/(d-kd)
fs' = 103.07 Mpa
IF: fs' < fs USE: COMPUTED fs'
As' = M2/fs'(d-d') 256.63 sq.mm.

TRY:
No. of Bars Bar Diameter Unit Area Total Area
Tension 2.00 16 mm 201.06 sq.mm. 402.12
1.00 12 mm 113.10 sq.mm. 113.10
Compression 2.00 16 mm 201.06 sq.mm. 402.12
- 12 mm 113.10 sq.mm. -

CHECK FOR SHEAR:

V = wL-wd 16,137.37 Newton

v = V/bd 0.48 Mpa


Allowable va: va =.09*sqrt(f'c) 0.41 Mpa

va<v THEREFORE: PROVIDE WEB REINFORCEMENT

10 mm Area = 78.54 sq.mm.

v' = v - va 0.07 Mpa

SPACING, S = 2Avfv/v'b 3,147.55 mm

ACI CODE: MAX. SPACING, Sm = 125 mm

IF: S>Sm : USE ACI CODE: Sm = D/2 125.00 mm


2.00 pcs. 16 mm. dia. RC Bars
1.00 pcs. 12 mm. dia. RC Bars

250 mm
10 mm dia. Stirrups

2.00 pcs. 16 mm. dia. RC Bars


- pcs. 12 mm. dia. RC Bars
150 mm.

@ End - span
Total Area
515.22 OK, SAFE Kana BAY!!!!

402.12 OK, SAFE Kana BAY!!!!


Proj. Name: 2 - Storey Resd'l. Bldg. General Description:
Location: Lolita Villaga, Brgy./ Caibaan, Tac. City Cantilever Beam 1.5 m span
Client: Pitao BL
Designer: Pitao BL
Date: 2/7/2008

INVESTIGATION OF DOUBLE REINF. BEAM


AT END - SPAN NEGATIVE MOMENT
DESIGN DATA FOR CONCRETE BEAMS:
13.79 17.2 20.7 mpa
ITEM fc' = 2,000.00 2,500.00 3,000.00 psi
fc = .45fc' 6.21 7.74 9.32
Es 200,000.00 200,000.00 200,000.00 mpa
Ec = 4730√fc' 17,564.80 19,616.67 21,520.20 mpa
n = Es/Ec 11.00 10.00 9.00
k = n/(n+fs/fc) 0.2481 0.2723 0.2884
j = 1 - k/3 0.92 0.91 0.90
Given: fc': 3,000.00 psi Span L: 1.5 meters
fc = 1,350.00 psi Beam Section:
9.308 mpa b 150 mm
fs = 30,000.00 psi d 250 mm
206.85 mpa Slab Thickness: 0.1 meters
Concrete Covering: Top = 35 Slab Width : 3 meters
Bottom = 25 Wall Ht. : 1 meters
Wall Thk.: 0.13 meters
DEADLOAD:
BEAM : 0.883 Kn / m
1/2L SLAB : 3.546 Kn / m
WALL : 1.530 Kn / m
SIESMIC: 0.877 Kn / m
LIVELOAD: 1.94 5.82 Kn / m
TOTAL LOAD: W = 12.657 Kn / m

DESIGN MOMENT: Md = WL^2/2 14.239 Kn - m

TRIAL BARS:
No. of Bars Diameter Area,mm^2
Tension 2 12 mm. As = 226.1952 IF: Mc > Md : SAFE, KAAYO BAY !!!
Tension 1 12 mm. As = 113.10 IF: Ms > Md: SAFE, G'YUD NA BAY !!!
Compressio 2 12 mm. As' = 226.20

b
(2n-1)As' = 3,845.32 sq.mm.
x
(x-d')

(d - x)
nAs = 3,053.64 sq.mm.

By Transformed section method:

bx^2/2 + (2n-1)As'(x - d') = nAs(d - x)

a = bx^2/2 = 75
b = (2n-1)As'x + nAsx = 6,898.95
c = (2n-1)As'd' - nAsd = (667,275.84)

x = 58.947 mm
x - d' = 33.95 mm
d-x = 191.05 mm

Moment of Inertia' I = bx^3/3 +(2n-1)As'(x-d')^2 +nAs(d - x)^2

I = 126,134,211.24 mm^4

MOMENT CAPACITY FOR CONCRETE:

fc = Mcx/I
Mc = fcI/x 19.92 Kn - m

MOMENT CAPACITY FOR STEEL:

fs = nMs(d-x)/I
Ms = fsI/n/(d-x) 15.17 Kn - m
2 pcs. 12 mm. dia. RC Bars
1 pcs. 12 mm. dia. RC Bars

250 mm

2.00 pcs. 12 mm. dia. RC Bars

150 mm.

@ End - span

Md : SAFE, KAAYO BAY !!!


Md: SAFE, G'YUD NA BAY !!!

You might also like