Scribd
Upload
137 views

Auto TR TO Configuration (Warehouse 206) Quick Guide

This document provides a quick guide for configuring automatic transfer order (TO) creation for Warehouse 206 in SAP. The steps include: 1) Checking the storage type settings for Warehouse 206 match the warehouse settings. 2) Navigating to Activities > Transfers > Set Auto TO Creation to assign recipients and control data. 3) Activating background processing by entering a job name and clicking "Immediately". 4) Verifying the configuration by running report RLAUTA10 and checking the step list overview.

Uploaded by

nona_rose218
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
137 views

Auto TR TO Configuration (Warehouse 206) Quick Guide

This document provides a quick guide for configuring automatic transfer order (TO) creation for Warehouse 206 in SAP. The steps include: 1) Checking the storage type settings for Warehouse 206 match the warehouse settings. 2) Navigating to Activities > Transfers > Set Auto TO Creation to assign recipients and control data. 3) Activating background processing by entering a job name and clicking "Immediately". 4) Verifying the configuration by running report RLAUTA10 and checking the step list overview.

Uploaded by

nona_rose218
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

Auto TR TO Configuration (Warehouse 206) Quick Guide:

Settings must be the same as the storage type settings below:


e.g Warehouse 206:


Checked settings:


Then go to Activities Transfers Set Auto TO Creation
















From the screen, click on Assign recipient



This screen is displayed and see warehouse 206 with the ff. setting:

Next is to click control data

















Look for Warehouse 206


Then proceed to assign control:


Check WH 206:


Next is to activate background processing:

Enter a job name like the sample below:



Click immediately, then click save.


Enter Report RLAUTA10 in SE38 and click check.


Select for the variant, then click check.




StepList overview is displayed.


Then in SPRO, click on WM Activities Transfers Set Up automatic TO creation
Confirmation screen should be displayed.





Select on per movement type


Check WH 206 mvt type 311.




Next is in WM Interfaces Define Movement Types, select assign WM movement type, then
check for movement type 311.


After assigning 311 movement type, then click back and select LE-WM Interface







Check warehouse 206 and get the ff. parameters for movement type 311.

You might also like