Scribd
Upload
2K views

Motor Maintenance Checklist: Eqipment Name: Work Permit No.: Motor Rating: Maint. Done On Date: Maint. Due On Date

This document is a maintenance checklist for a motor. It lists 19 steps to check and service different parts of the motor and its electrical connections. These include checking for loose wiring, inspecting contactors and relays, verifying insulation resistance values, lubricating parts, and cleaning and tightening terminals. Spaces are provided after each item to indicate whether the target was achieved and any remarks. Signatures are required from the shift incharge and area incharge to verify completion.

Uploaded by

asyyas
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Motor Maintenance Checklist: Eqipment Name: Work Permit No.: Motor Rating: Maint. Done On Date: Maint. Due On Date

This document is a maintenance checklist for a motor. It lists 19 steps to check and service different parts of the motor and its electrical connections. These include checking for loose wiring, inspecting contactors and relays, verifying insulation resistance values, lubricating parts, and cleaning and tightening terminals. Spaces are provided after each item to indicate whether the target was achieved and any remarks. Signatures are required from the shift incharge and area incharge to verify completion.

Uploaded by

asyyas
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Eqipment Name: Work Permit No.

:
Motor Rating: Maint. Done On Date:
Maint. Due On Date:
SR NO DISCRIPTION TARGET ACTION TAKEN REMARKS
1 CLEARANCE FROM SHIFT IN-CHARGE(WORK PERMIT & SHUT DOWN PERMIT) YES/NO
2 DE-ENERGISE THE FEEDER YES/NO
3 FIXED THE TAG & LOCK ON THE FEEDER/MCC YES/NO
4 BLOWING OF FEEDER Cleaning
5 CHECKING OF TIGHTNESS OF POWER & CONTROL WIRING No loose connection.
6 CHECKING OF CONTACTOR
Healthy condition of
contacts & proper contact
surface of contacts.
7 CHECKING OF OVER LOAD RELAY(Do not change the value) No loose connection.
8 CHECKING OF DOOR LOCK ARRANGEMENT Door interlock should be o.k
9 CHECKING OF INDICATION LAMPS
Healthy condition of
lamps.
10 CHECKING OF FUSE YES/NO
11 CHECKING OF LUBRICATION YES/NO
12 CHECKING OF TIGHTNESS & CLEANING OF POWER CABLE AT MOTOR TERMINAL & PJ B YES/NO
13 CLEANING & TIGHTNESS OF CONTROL WIRING IN CJ B & LCS YES/NO
R-E
Y-E
B-E
15 FIXING OF COVER & CONDITION YES/NO
16 CHECKING TIGHTNESS OF FOUNDATION BOLT YES/NO
17 INFORMED TO SHIFT IN-CHARGE(REYURNING OF WORK PERMIT & SHUT DOWN PERMIT) YES/NO
18 REMOVED THE DANGER TAG YES/NO
19 ENERGISE THE FEEDER YES/NO
Signature Signature
Name Name
Shift Incharge Area Incharge
FEEDER SIDE
MOTOR SIDE
MOTOR MAINTENANCE CHECKLIST
14 CHECKING OF IR VALUE(For LT Motor :1.5 M OHM )

You might also like