Scribd
Upload
103 views

Design Basis.

1. The document provides design parameters for a steel structure including building dimensions of 12.2m width and 27m length, wind speed of 47m/s, seismic zone of IV, and dead and live loads. 2. Key structural elements include cold formed sections for the roof, 0.5mm deck sheeting, and built-up sections for columns and beams. 3. Design is based on IS 800-2007 for limit state method and deflection limits of L/180 for rafters, EH/150 for columns and L/150 for purlins.

Uploaded by

anuj3936
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
103 views

Design Basis.

1. The document provides design parameters for a steel structure including building dimensions of 12.2m width and 27m length, wind speed of 47m/s, seismic zone of IV, and dead and live loads. 2. Key structural elements include cold formed sections for the roof, 0.5mm deck sheeting, and built-up sections for columns and beams. 3. Design is based on IS 800-2007 for limit state method and deflection limits of L/180 for rafters, EH/150 for columns and L/150 for purlins.

Uploaded by

anuj3936
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

: 12.

2 m
: 26.9 m
: 1 @ 12.240 m
: 2 @ 5.64 m
: 2 @ 5.64 m
: 1 @ 4.15 m
3 @ 4.87+2.1+4.87 m
: 3.3 m
: 1 in 1
: Fixed
:
: Mpa
: kN/M
2
IS875 Part 1
: kN/M
2
CL.4.1 & Table no.2(IS875 part2)
:
: 0.24 Terrain Category 2
: m/sec Class B
:
:
: Vb * K1 * K2 * K3 Where,Probability Factor K1 = 1
: 47 * 1 * 1.05 * 1 = 49.35 m/s Terrain,height and structure size factor K2 = 1.05
Topography Factor K3 = 1
: 146.13 Kg/Sq.m
0.80 mm
a. Staircase details : Yes
: A to B & 3 to 4
: 4.15 m
: 3 m
: 1
Sheeting Requirement Outer Sheet Thk. Area in Sq.m
: Yes 0.50 Bare 347.4 Sq.m
:
:
:
: Portal Bracing
: Built Up Member
A) B) SERVICEABILITY CRITERIA
IS800-2007
1 * The Structure Design on the basis of Limit State Methodas per IS800-2007.
2 * Wind Speed 47 m/s Considering as per IS875 Part 3 & Seismic Zone IV Considering as per IS 1893-2002.
3 * RCC Slab 75 mm thick Considering on Floor. Dead Load 250 kg/m2 & Live load 200 kg/m2 Considering on Floor.
4 * Roof Sheeting 0.5 mm Considering on Roof . Dead load 15 kg/m2 & 75 kg/m2 Considering on Roof.
5 *Built up Section Considered For Column & Beam . Cold Form member Considering for Roof Portion.
6 *Semi-Rigid Frame & Fixed Base Considering for Structure
7 *Structure Design for Static analysis & Dynamic analysis are not considering .
8 *Importance Factor 1 & Response Reduction Factor 4 Considering for the Structure .
Subgirts
NOTES :
k. Bracing
Girts
Purlins
No
1 to 6 & A to D
Yes
No
Design Loads on roof load
Material Strength
b. Live Load
h. Secondary Members
Roof
Clear Height
Design Wind Speed, Vz =
Design Wind Pressure, Vz = 0.06 * Vz^2
Support Condition
a. Dead Load
ENCLOSED
L/180 -Rafter,EH/150 -Column, L/150 -Purlin
BUILDING DIMENSIONS
Building Length
27 m
Intermediate Bay
col grid both ways in m
Area (m
2
)
Mezz. 1
Width module
Clear Height (bottom of Steel Beam)
Details:
End Bay
DESIGN BASIS
DESIGN CODE
Building Width (O/O Steel Columns)
(O/O Steel Columns)
0.15
DESIGN PARAMETERS :
Roof Slope
Bay Spacing
MEZZANINE DETAILS :
Yes
Width (m)
Length(m)
47
Deflection Limits
EQ Zone
Location
329 Sq.m
Width
Height
Number of Staircases
2.5 kN/m2
3.3 m
MISCELLANEOUS ITEMS :
12 m
Live Load (kN/m
2
)
Deck Sheet Thickness(mm)
2.0 kN/m2
f. Sheeting Details :
0.2 Internal Wind Coefficient
Building Condition
Wind Speed
Intermediate Bay
Gable Column Spacing
345
IS800 - 2007
IV
0.75
Grids
No. Of Floors 2
27 m
Dead Load (kN/m
2
)
Type
STRENGTH CRITERIA
IS 800-2007(LSM)
LOAD COMBINATIONS :

You might also like